|
| 1 | Mobile Communication Lab |
| 2 | 32 Channel PC based Logic Analyzer with USB interface for observation of Data , clock, Modulation simultaneously |
| 3 | GSM Trainer with study of AT commands & Application Module with PC interface & software |
| 4 | Mobile Handset Trainer with Dual SIM, Colour Graphic LCD, Separate section to study charging & Vibration mode, Study of constellation diagrams for GMSK Signals, Facility to introduce switched faults. |
| 5 | Training Platform to study & understand working of All sections of 4G VoLTE Mobile Phone. Colour TFT display with capacitive touch screen Operation in Quad band Frequency network Tx/ Rx frequency measurement and band verification Study of GMSK Signals. |
| 6 | Basic Electrical Lab |
| 7 | Portable Moving Iron Voltmeter, enclosed in Engg. Plastic Case AE make, range 75/150/300 V or 150/300/600 V. Accuracy 1.0%. |
| 8 | Portable Moving Coil Voltmeter, enclosed in Engg. Plastic Case AE make, range 75/150/300 V or 150/300/600 V. Accuracy 1.0%. |
| 9 | Portable Moving Iron Ammeter, enclosed in Engg. Plastic Case AE make, range 1/2A or 2.5/5 A or 5/10 A. Accuracy 1.0%. |
| 10 | Portable Moving Coil Ammeter, enclosed in Engg. Plastic Case AE make, range 1/2A or 2.5/5 A or 5/10 A. Accuracy 1.0%. |
| 11 | Digital multimeter: 3½ Digit DC-AC Volts & Currents Resistance/Diodes/Continuity Testing 10A Range Fuse protected Over Range Indication Palm size with built-in tilt stand. |
| 12 | Complete experimental setup measuring the steady-state and Transient Time-Response of R-L, R-C, And R-L-C circuits to a Step Change In Voltage |
| 13 | Digital Frequency Counter 20 Hz to 200 KHz in line with item at sr no 1.12 |
| 14 | DSO 50 MHz in line with item at sr no 1.12 |
| 15 | Transformer & control panel (To Determine Excitation phenomenon (B.H. Loop) of Single Phase Transformer using CRO (Measurement of Iron Losses) Consisting of 0.5 KVA Transformer & control panel consisting of single phase variac & digital voltmeter, ammeter & wattmeter, suitable electrical load. Complete experimental setup |
| 16 | DSO 50 MHz in line with item at sr no 1.15 |
| 17 | Control panel of Three-phase transformer (1 KVA, 400/400V): Star and Delta connections. To determine Voltage and Current relationships (line-line voltage, phase-to-neutral voltage, line and phase currents). Phase-shifts between the primary and secondary side. Cumulative three-phase power in balanced three-phase circuits |
| 18 | Cut Section Model of D.C. Motor Shunt/compound wound: DC Motor, 1 H.P, 1500 RPM, 230 V, Insulation class “B”. |
| 19 | DC Starter inline with cut section model of D.C. Motor Shunt/compound in line with item at sr no 1.18 |
| 20 | Cut Section Model of 3-Phase Squirrel Cage Induction Motor: AC Squirrel Cage Induction Motor, 1 HP. 3 phase, 415 v, 50 Hz class “B” Insulation |
| 21 | DOL Starter in line with item at sr no 1.20 |
| 22 | Cut Section Model of synchronous Machine (3-phase): Synchronous Machine 1 KVA, 3 phase, 415 V, 50 Hz, 4 Pole, 1500 RPM, Star connected |
| 23 | DOL Starter in line with item at sr no 1.22 |
| 24 | Cut Section Model of Slip ring Induction Motor –3 phase (phase wound): Slip ring Induction Motor 2 HP., 3 Phase , 415 v, 1440 RPM, 50 Hz |
| 25 | Rotor Resistance Starter in line with item at sr no 1.24 |
| 26 | Cut Section model of Single Phase Squirrel Cage Induction Motor: AC Squirrel Cage Induction Motor, 1 HP. 1-phase |
| 27 | DOL Starter in line with item at sr no 1.26 |
| 28 | Complete experimental set-up to determine torque speed Characteristic of separately excited dc motor. |
| 29 | DC to DC Converter |
| 30 | Complete set-up for use of dc-ac converter for speed control of an induction motor |
| 31 | Components of LT Switchgear |
| 32 | Microprocessor and Microcontroller Lab |
| 33 | Microcontroller 8051 trainer kit RS 232-BNC connector for display of wave form on CRO |
| 34 | Digital System Design Lab |
| 35 | Xilinx Vivado Software |
| 36 | Spartan 7 SP701 FPGA Evaluation Kit |
