Tender For Supply Of Instrumentation Cable Tray And Cable Duct With Accessories. ; 1 Lot-1 : Perforated Anodized Aluminium Cable Trays 50Mm ( W ) X 50Mm ( H ) X 2Mm ( T ) With Cover Along With All Accessories Including Coupler Plates, Clamps ( For Every 2 Meters ) , Nuts, Bolts, & Washers As Per The Installation Standard ( Refer Tp-1Zzza-Ic-Std-0001_ Pg. No.48-59 ) Including Tpi Charges, Packing & Forwarding, Documentation, Inspection & Testing, Special Tools & Tackles ( Mr Reference:Tp-1Zzza-Ic-Rfq-0018_D2 ) 2 Supply Of Perforated Anodized Aluminium Cable Trays 50Mm ( W ) X 50Mm ( H ) X 2Mm ( T ) With Cover-Straight Run Of 2.5 Meters Including Clamps, Nuts, Bolts & Washers 3 Supply Of Coupler Plates ( For Every 2.5 Meters ) Including Clamps, Nuts, Bolts & Washers 4 Lot-1 : Perforated Anodized Aluminium Cable Trays 100Mm ( W ) X 50Mm ( H ) X 3Mm ( T ) With Cover Along With All Accessories Including Coupler Plates, Clamps ( For Every 2 Meters ) , Nuts, Bolts, & Washers As Per The Installation Standard ( Refer Tp-1Zzza-Ic-Std-0001_Pg. No.48-59 ) Including Tpi Charges, Packing & Forwarding, Documentation, Inspection & Testing, Special Tools & Tackles ( Mr Reference:Tp-1Zzza-Ic-Rfq-0018_D2 ) 5 Supply Of Perforated Anodized Aluminium Cable Trays 100Mm ( W ) X 50Mm ( H ) X 3Mm ( T ) With Cover-Straight Run Of 2.5 Meters Including Clamps, Nuts, Bolts & Washers 6 Supply Of Coupler Plates ( For Every 2.5 Meters ) Including Clamps, Nuts, Bolts & Washers 7 Lot-1 :Perforated Anodized Aluminium Cable Trays 150Mm ( W ) X 50Mm ( H ) X 3Mm ( T ) With Cover Along With All Accessories Including Coupler Plates, Clamps ( For Every 2 Meters ) , Nuts, Bolts, & Washers As Per The Installation Standard ( Refer Tp-1Zzza-Ic-Std-0001_ Pg. No.48-59 ) Including Tpi Charges, Packing & Forwarding, Documentation, Inspection & Testing, Special Tools & Tackles ( Mr Reference:Tp-1Zzza-Ic-Rfq-0018_D2 ) 8 Supply Of Perforated Anodized Aluminium Cable Trays 150Mm ( W ) X 50Mm ( H ) X 3Mm ( T ) With Cover-Straight Run Of 2.5 Meters Including Clamps, Nuts, Bolts & Washers 9 Supply Of Perforated Anodized Aluminium Cable Trays Fitting With Cover-150Mm ( W ) X 50Mm ( H ) -30 Degree Vertical Inside Bend Including Clamps, Nuts, Bolts & Washers 10 Supply Of Perforated Anodized Aluminium Cable Trays Fitting With Cover -150Mm ( W ) X 50Mm ( H ) -30 Degree Vertical Outside Bend Including Clamps, Nuts, Bolts & Washers 11 Supply Of Perforated Anodized Aluminium Cable Trays Fitting With Cover -150Mm ( W ) X 50Mm ( H ) -45 Degree Horizontal Bend Including Clamps, Nuts, Bolts & Washers 12 Supply Of Perforated Anodized Aluminium Cable Trays Fitting With Cover -150Mm ( W ) X 50Mm ( H ) -45 Degree Vertical Inside Bend Including Clamps, Nuts, Bolts & Washers 13 Supply Of Perforated Anodized Aluminium Cable Trays Fitting With Cover -150Mm ( W ) X 50Mm ( H ) -45 Degree Vertical Outside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 14 Supply Of Perforated Anodized Aluminium Cable Trays Fitting With Cover -150Mm ( W ) X 50Mm ( H ) -60 Degree Horizontal Bend Including Clamps, Nuts, Bolts & Washers 15 Supply Of Perforated Anodized Aluminium Cable Trays Fitting With Cover -150Mm ( W ) X 50Mm ( H ) -90 Degree Horizontal Bend Including Clamps, Nuts, Bolts & Washers 16 Supply Of Perforated Anodized Aluminium Cable Trays Fitting With Cover -150Mm ( W ) X 50Mm ( H ) -90 Degree Vertical Inside Bend Including Clamps, Nuts, Bolts & Washers 17 Supply Of Perforated Anodized Aluminium Cable Trays Fitting With Cover -150Mm ( W ) X 50Mm ( H ) -90 Degree Vertical Outside Bend Including Clamps, Nuts, Bolts & Washers 18 Supply Of Perforated Anodized Aluminium Cable Trays Fitting With Cover -150Mm ( W ) X 50Mm ( H ) -Tee, Horizontal Including Clamps, Nuts, Bolts & Washers 19 Supply Of Perforated Anodized Aluminium Cable Trays Fitting With Cover -150Mm ( W ) X 50Mm ( H ) -Cross, Horizontal Including Clamps, Nuts, Bolts & Washers 20 Supply Of Perforated Anodized Aluminium Cable Trays Fitting With Cover -150Mm ( W ) X 50Mm ( H ) -Reducer Including Clamps, Nuts, Bolts & Washers 21 Supply Of Perforated Anodized Aluminium Cable Trays Fitting With Cover -150Mm ( W ) X 50Mm ( H ) - Vertical Hinged Joint Including Clamps, Nuts, Bolts & Washers 22 Supply Of Perforated Anodized Aluminium Cable Trays Fitting With Cover -150Mm ( W ) X 50Mm ( H ) - Horizontal Hinged Joint Including Clamps, Nuts, Bolts & Washers 23 Supply Of Coupler Plates ( For Every 2.5 Meters ) Including Clamps, Nuts, Bolts & Washers 24 Supply Of Partition Plates For Perforated Anodized Aluminium Cable Tray-150Mm ( W ) X 50Mm ( H ) Along With Nuts And Bolts 25 Lot-1 : Gi. Lader Cable Trays – Epoxy Coated 300Mm ( W ) X 150Mm ( H ) X 3Mm ( T ) With Cover Along With All Accessories Including Fittings, Coupler Plates, Clamps ( For Every 2 Meters ) , Nuts, Bolts, & Washers As Per The Installation Standard ( Refer Tp-1Zzza-Ic-Std-0001_ Pg. No.60-79 ) Including Tpi Charges, Packing & Forwarding, Documentation, Inspection & Testing, Special Tools & Tackles ( Mr Reference:Tp-1Zzza-Ic-Rfq-0018_D2 ) 26 Supply Of Gi. Lader Cable Trays 300Mm ( W ) X 150Mm ( H ) X 2Mm ( T ) With Cover-Straight Run Of 2.5 Meters Including Clamps, Nuts, Bolts & Washers 27 Supply Of Gi. Lader Cable Tray Fitting With Cover -300Mm ( W ) X 150Mm ( H ) -30 Degree Horizontal Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 28 Supply Of Gi. Lader Cable Tray Fitting With Cover -300Mm ( W ) X 150Mm ( H ) -30 Degree Vertical Inside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 29 Supply Of Gi. Lader Cable Tray Fitting With Cover -300Mm ( W ) X 150Mm ( H ) - 30 Degree Vertical Outside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 30 Supply Of Gi. Lader Cable Tray Fitting With Cover -300Mm ( W ) X 150Mm ( H ) -45 Degree Horizontal Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 31 Supply Of Gi. Lader Cable Tray Fitting With Cover -300Mm ( W ) X 150Mm ( H ) -45 Degree Vertical Inside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 32 Supply Of Gi. Lader Cable Tray Fitting With Cover -300Mm ( W ) X 150Mm ( H ) -45 Degree Vertical Outside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 33 Supply Of Gi. Lader Cable Tray Fitting With Cover -300Mm ( W ) X 150Mm ( H ) -60 Degree Horizontal Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 34 Supply Of Gi. Lader Cable Tray Fitting With Cover -300Mm ( W ) X 150Mm ( H ) -60 Degree Vertical Inside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 35 Supply Of Gi. Lader Cable Tray Fitting With Cover -300Mm ( W ) X 150Mm ( H ) -60 Degree Vertical Outside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 36 Supply Of Gi. Lader Cable Tray Fitting With Cover -300Mm ( W ) X 150Mm ( H ) -90 Degree Horizontal Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 37 Supply Of Gi. Lader Cable Tray Fitting With Cover -300Mm ( W ) X 150Mm ( H ) -90 Degree Vertical Inside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 38 Supply Of Gi. Lader Cable Tray Fitting With Cover -300Mm ( W ) X 150Mm ( H ) -90 Degree Vertical Outside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 39 Supply Of Gi. Lader Cable Tray Fitting With Cover -300Mm ( W ) X 150Mm ( H ) -Tee, Horizontal With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 40 Supply Of Gi. Lader Cable Tray Fitting With Cover -300Mm ( W ) X 150Mm ( H ) -90 Degree Horizontal Bend With Bending Radius Of 300Mm Including Clamps, Nuts, Bolts & Washers 41 Supply Of Gi. Lader Cable Tray Fitting With Cover -300Mm ( W ) X 150Mm ( H ) -90 Degree Vertical Inside Bend With Bending Radius Of 300Mm Including Clamps, Nuts, Bolts & Washers 42 Supply Of Gi. Lader Cable Tray Fitting With Cover -300Mm ( W ) X 150Mm ( H ) -90 Degree Vertical Outside Bend With Bending Radius Of 300Mm Including Clamps, Nuts, Bolts & Washers 43 Supply Of Gi. Lader Cable Tray Fitting With Cover -300Mm ( W ) X 150Mm ( H ) -Tee, Horizontal With Bending Radius Of 300Mm Including Clamps, Nuts, Bolts & Washers 44 Supply Of Gi. Lader Cable Tray Fitting With Cover -300Mm ( W ) X 150Mm ( H ) -Cross, Horizontal With Bending Radius Of 300Mm Including Clamps, Nuts, Bolts & Washers 45 Supply Of Gi. Lader Cable Tray Fitting With Cover -300Mm ( W ) X 150Mm ( H ) -Reducer Including Clamps, Nuts, Bolts & Washers 46 Supply Of Gi. Lader Cable Tray Fitting With Cover -300Mm ( W ) X 150Mm ( H ) -Vertical Hinged Joint Including Clamps, Nuts, Bolts & Washers 47 Supply Of Gi. Lader Cable Tray Fitting With Cover -300Mm ( W ) X 150Mm ( H ) - Horizontal Hinged Joint Including Clamps, Nuts, Bolts & Washers 48 Supply Of Coupler Plates ( For Every 2.5 Meters ) Including Clamps, Nuts, Bolts & Washers 49 Supply Of Partition Plate For Gi. Lader Cable Tray- 300Mm ( W ) X 150Mm ( H ) Along With Nuts And Bolts 50 Lot-1 : Gi. Lader Cable Trays - Epoxy Coated 450Mm ( W ) X 150Mm ( H ) X 3Mm ( T ) With Cover Along With All Accessories Including Fittings, Coupler Plates, Clamps ( For Every 2 Meters ) , Nuts, Bolts, & Washers As Per The Installation Standard ( Refer Tp-1Zzza-Ic-Std-0001_Pg. No.60-79 ) Including Tpi Charges, Packing & Forwarding, Documentation, Inspection & Testing, Special Tools & Tackles ( Mr Reference:Tp-1Zzza-Ic-Rfq-0018_D2 ) 51 Supply Of Gi. Lader Cable Trays 450Mm ( W ) X 150Mm ( H ) X 3Mm ( T ) With Cover-Straight Run Of 2.5 Meters Including Clamps, Nuts, Bolts & Washers 52 Supply Of Gi. Lader Cable Trays Fitting With Cover -450Mm ( W ) X 150Mm ( H ) - 30 Degree Vertical Inside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 53 Supply Of Gi. Lader Cable Trays Fitting With Cover -450Mm ( W ) X 150Mm ( H ) - 30 Degree Vertical Outside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 54 Supply Of Gi. Lader Cable Trays Fitting With Cover -450Mm ( W ) X 150Mm ( H ) - 90 Degree Horizontal Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 55 Supply Of Gi. Lader Cable Trays Fitting With Cover -450Mm ( W ) X 150Mm ( H ) - 90 Degree Vertical Inside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 56 Supply Of Gi. Lader Cable Trays Fitting With Cover -450Mm ( W ) X 150Mm ( H ) - 90 Degree Vertical Outside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 57 Supply Of Gi. Lader Cable Trays Fitting With Cover -450Mm ( W ) X 150Mm ( H ) - Reducer, Left Including Clamps, Nuts, Bolts & Washers 58 Supply Of Gi. Lader Cable Trays Fitting With Cover -450Mm ( W ) X 150Mm ( H ) - Reducer, Straight Including Clamps, Nuts, Bolts & Washers 59 Supply Of Gi. Lader Cable Trays Fitting With Cover -450Mm ( W ) X 150Mm ( H ) - Tee, Horizontal With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 60 Supply Of Gi. Lader Cable Trays Fitting With Cover -450Mm ( W ) X 150Mm ( H ) - Tee, Horizontal Reducing With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 61 Supply Of Gi. Lader Cable Trays Fitting-450Mm ( W ) X 150Mm ( H ) - 90 Degree Horizontal Bend With Bending Radius Of 300Mm Including Clamps, Nuts, Bolts & Washers 62 Supply Of Gi. Lader Cable Trays Fitting With Cover -450Mm ( W ) X 150Mm ( H ) - 90 Degree Vertical Inside Bend With Bending Radius Of 300Mm Including Clamps, Nuts, Bolts & Washers 63 Supply Of Gi. Lader Cable Trays Fitting With Cover -450Mm ( W ) X 150Mm ( H ) - 90 Degree Vertical Outside Bend With Bending Radius Of 300Mm Including Clamps, Nuts, Bolts & Washers 64 Supply Of Gi. Lader Cable Trays Fitting With Cover -450Mm ( W ) X 150Mm ( H ) - Tee, Horizontal With Bending Radius Of 300Mm Including Clamps, Nuts, Bolts & Washers 65 Supply Of Gi. Lader Cable Trays Fitting With Cover -450Mm ( W ) X 150Mm ( H ) - Cross, Horizontal With Bending Radius Of 300Mm Including Clamps, Nuts, Bolts & Washers 66 Supply Of Gi. Lader Cable Trays Fitting With Cover -450Mm ( W ) X 150Mm ( H ) - Vertical Hinged Joint Including Clamps, Nuts, Bolts & Washers 67 Supply Of Gi. Lader Cable Trays Fitting With Cover -450Mm ( W ) X 150Mm ( H ) - Horizontal Hinged Joint Including Clamps, Nuts, Bolts & Washers 68 Supply Of Coupler Plates ( For Every 2.5 Meters ) Including Clamps, Nuts, Bolts & Washers 69 Supply Of Partition Plate For Gi. Lader Cable Tray- 450Mm ( W ) X 150Mm ( H ) Along With Nuts And Bolts 70 Lot-1 : Gi. Lader Cable Trays - Epoxy Coated 600Mm ( W ) X 150Mm ( H ) X 4Mm ( T ) With Cover Along With All Accessories Including Fittings, Coupler Plates, Clamps ( For Every 2 Meters ) , Nuts, Bolts, & Washers As Per The Installation Standard ( Refer Tp-1Zzza-Ic-Std-0001_Pg. No.60-79 ) Including Tpi Charges, Packing & Forwarding, Documentation, Inspection & Testing, Special Tools & Tackles ( Mr Reference:Tp-1Zzza-Ic-Rfq-0018_D2 ) 71 Supply Of Gi. Lader Cable Trays 600Mm ( W ) X 150Mm ( H ) X 4Mm ( T ) With Cover-Straight Run Of 2.5 Meters Including Clamps, Nuts, Bolts & Washers 72 Supply Of Gi. Lader Cable Tray Fitting With Cover 600Mm ( W ) X 150Mm ( H ) - 30 Degree Horizontal Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 73 Supply Of Gi. Lader Cable Tray Fitting With Cover 600Mm ( W ) X 150Mm ( H ) - 30 Degree Vertical Inside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 74 Supply Of Gi. Lader Cable Tray Fitting With Cover 600Mm ( W ) X 150Mm ( H ) - 30 Degree Vertical Outside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 75 Supply Of Gi. Lader Cable Tray Fitting With Cover 600Mm ( W ) X 150Mm ( H ) - 45 Degree Horizontal Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 76 Supply Of Gi. Lader Cable Tray Fitting With Cover 600Mm ( W ) X 150Mm ( H ) - 45 Degree Vertical Inside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 77 Supply Of Gi. Lader Cable Tray Fitting With Cover 600Mm ( W ) X 150Mm ( H ) - 45 Degree Vertical Outside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 78 Supply Of Gi. Lader Cable Tray Fitting With Cover 600Mm ( W ) X 150Mm ( H ) - 90 Degree Horizontal Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 79 Supply Of Gi. Lader Cable Tray Fitting With Cover 600Mm ( W ) X 150Mm ( H ) - 90 Degree Vertical Inside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 80 Supply Of Gi. Lader Cable Tray Fitting With Cover 600Mm ( W ) X 150Mm ( H ) - 90 Degree Vertical Outside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 81 Supply Of Gi. Lader Cable Tray Fitting With Cover 600Mm ( W ) X 150Mm ( H ) - Reducer, Straight Including Clamps, Nuts, Bolts & Washers 82 Supply Of Gi. Lader Cable Tray Fitting With Cover 600Mm ( W ) X 150Mm ( H ) - Tee, Horizontal With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 83 Supply Of Gi. Lader Cable Tray Fitting With Cover 600Mm ( W ) X 150Mm ( H ) - Tee, Horizontal Reducing With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 84 Supply Of Coupler Plates ( For Every 2.5 Meters ) Including Clamps, Nuts, Bolts & Washers 85 Supply Of Partition Plate For Gi. Lader Cable Tray- 600Mm ( W ) X 150Mm ( H ) Along With Nuts And Bolts 86 Lot-1 : Hot Dip Galvanized With Epoxy Coated Cable Ducts 400Mm ( W ) X 200Mm ( H ) X 4Mm ( T ) With Cover Along With All Accessories Including Partition Plates, Fittings, Coupler Plates, Clamps ( For Every 2 Meters ) , Nuts, Bolts, & Washers As Per The Installation Standard ( Refer Tp-1Zzza-Ic-Std-0001_Pg. No.16-47 ) Including Tpi Charges, Packing & Forwarding, Documentation, Inspection & Testing, Special Tools & Tackles ( Mr Reference:Tp-1Zzza-Ic-Rfq-0018_D2 ) 87 Supply Of Hot Dip Galvanized Cable Ducts 400Mm ( W ) X 200Mm ( H ) X 4Mm ( T ) With Cover-Straight Run Of 2.5 Meters Including Clamps, Nuts, Bolts & Washers 88 Hot Dip Galvanized Cable Duct Fitting With Cover -400Mm ( W ) X 200Mm ( H ) - 90 Degree Elbow Horizontal Plane With Bending Radius Of 450Mm Including Clamps, Supply Of Nuts, Bolts & Washers 89 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -400Mm ( W ) X 200Mm ( H ) - 90 Degree Vertical Plane Elbow Joins Up With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 90 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -400Mm ( W ) X 200Mm ( H ) - 90 Degree Vertical Plane Elbow Joins Down With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 91 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -400Mm ( W ) X 200Mm ( H ) - 60 Degree Elbow Horizontal Plane With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 92 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -400Mm ( W ) X 200Mm ( H ) - 45 Degree Elbow Horizontal Plane With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 93 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -400Mm ( W ) X 200Mm ( H ) - 45 Degree Vertical Plane Elbow Joins Up With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 94 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -400Mm ( W ) X 200Mm ( H ) - 45 Degree Vertical Plane Elbow Joins Down With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 95 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -400Mm ( W ) X 200Mm ( H ) - 30 Degree Elbow Horizontal Plane With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 96 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -400Mm ( W ) X 200Mm ( H ) - 30 Degree Vertical Plane Elbow Joins Up With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 97 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -400Mm ( W ) X 200Mm ( H ) - 30 Degree Vertical Plane Elbow Joins Down With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 98 Supply Of Coupler Plates ( For Every 2.5 Meters ) Including Clamps, Nuts, Bolts & Washers 99 Supply Of End Plates Including Clamps, Nuts, Bolts & Washers 100 Supply Of Partition Plate For Hot Dip Galvanized Cable Ducts 400Mm ( W ) X 200Mm ( H ) Along With Nuts And Bolts 101 Lot-1 : Hot Dip Galvanized With Epoxy Coated Cable Ducts 600Mm ( W ) X 300Mm ( H ) X 4Mm ( T ) With Cover Along With All Accessories Including Partition Plates, Fittings, Coupler Plates, Clamps ( For Every 2 Meters ) , Nuts, Bolts, & Washers As Per The Installation Standard ( Refer Tp-1Zzza-Ic-Std-0001_Pg. No.16-47 ) Including Tpi Charges, Packing & Forwarding, Documentation, Inspection & Testing, Special Tools & Tackles ( Mr Reference:Tp-1Zzza-Ic-Rfq-0018_D2 ) 102 Supply Of Hot Dip Galvanized Cable Ducts 600Mm ( W ) X 300Mm ( H ) X 4Mm ( T ) With Cover-Straight Run Of 2.5 Meters Including Clamps, Nuts, Bolts & Washers 103 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -600Mm ( W ) X 300Mm ( H ) - 90 Degree Elbow Horizontal Plane With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 104 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -600Mm ( W ) X 300Mm ( H ) - 90 Degree Vertical Plane Elbow Joins Up With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 105 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -600Mm ( W ) X 300Mm ( H ) - 90 Degree Vertical Plane Elbow Joins Down With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 106 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -600Mm ( W ) X 300Mm ( H ) - 30 Degree Vertical Plane Elbow Joins Up With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 107 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -600Mm ( W ) X 300Mm ( H ) - 30 Degree Vertical Plane Elbow Joins Down With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 108 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -600Mm ( W ) X 300Mm ( H ) - 45 Degree Elbow Horizontal Plane With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 109 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -600Mm ( W ) X 300Mm ( H ) - 60 Degree Elbow Horizontal Plane With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 110 Supply Of Coupler Plates ( For Every 2.5 Meters ) Including Clamps, Nuts, Bolts & Washers 111 Supply Of End Plates Including Clamps, Nuts, Bolts & Washers 112 Supply Of Partition Plate For Hot Dip Galvanized Cable Ducts- 600Mm ( W ) X 300Mm ( H ) Along With Nuts And Bolts 113 Lot-1 :Hot Dip Galvanized With Epoxy Coated Cable Ducts 800Mm ( W ) X 300Mm ( H ) X 5Mm ( T ) With Cover Along With All Accessories Including Partition Plates, Fittings, Coupler Plates, Clamps ( For Every 2 Meters ) , Nuts, Bolts, & Washers As Per The Installation Standard ( Refer Tp-1Zzza-Ic-Std-0001_Pg. No.16-47 ) Including Tpi Charges, Packing & Forwarding, Documentation, Inspection & Testing, Special Tools & Tackles ( Mr Reference:Tp-1Zzza-Ic-Rfq-0018_D2 ) 114 Supply Of Hot Dip Galvanized Cable Ducts 800Mm ( W ) X 300Mm ( H ) X 5Mm ( T ) With Cover-Straight Run Of 2.5 Meters Including Clamps, Nuts, Bolts & Washers 115 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -800Mm ( W ) X 300Mm ( H ) - 90 Degree Elbow Horizontal Plane With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 116 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -800Mm ( W ) X 300Mm ( H ) - 90 Degree Vertical Plane Elbow Joins Up With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 117 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -800Mm ( W ) X 300Mm ( H ) - 90 Degree Vertical Plane Elbow Joins Down With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 118 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -800Mm ( W ) X 300Mm ( H ) - 30 Degree Elbow Horizontal Plane With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 119 Supply Of Coupler Plates ( For Every 2.5 Meters ) Including Clamps, Nuts, Bolts & Washers 120 Supply Of End Plates Including Clamps, Nuts, Bolts & Washers 121 Supply Of Partition Plate For Hot Dip Galvanized Cable Ducts- 800Mm ( W ) X 300Mm ( H ) Along With Nuts And Bolts 122 Lot-1 : Hot Dip Galvanized With Epoxy Coated Cable Ducts 1000Mm ( W ) X 400Mm ( H ) X 5Mm ( T ) With Cover Along With All Accessories Including Partition Plates, Fittings, Coupler Plates, Clamps ( For Every 2 Meters ) , Nuts, Bolts, & Washers As Per The Installation Standard ( Refer Tp-1Zzza-Ic-Std-0001_Pg. No.16-47 ) Including Tpi Charges, Packing & Forwarding, Documentation, Inspection & Testing, Special Tools & Tackles ( Mr Reference:Tp-1Zzza-Ic-Rfq-0018_D2 ) 123 Supply Of Hot Dip Galvanized Cable Ducts 1000Mm ( W ) X 400Mm ( H ) X 5Mm ( T ) With Cover-Straight Run Of 2.5 Meters Including Clamps, Nuts, Bolts & Washers 124 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -1000Mm ( W ) X 400Mm ( H ) - 90 Degree Elbow Horizontal Plane With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 125 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -1000Mm ( W ) X 400Mm ( H ) - 90 Degree Vertical Plane Elbow Joins Up With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 126 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -1000Mm ( W ) X 400Mm ( H ) - 90 Degree Vertical Plane Elbow Joins Down With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 127 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover -1000Mm ( W ) X 400Mm ( H ) - 45 Degree Elbow Horizontal Plane With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 128 Supply Of Coupler Plates ( For Every 2.5 Meters ) Including Clamps, Nuts, Bolts & Washers 129 Supply Of End Plates Including Clamps, Nuts, Bolts & Washers 130 Supply Of Partition Plate For Hot Dip Galvanized Cable Ducts- -1000Mm ( W ) X 400Mm ( H ) Along With Nuts And Bolts 131 Lot-1 : Hot Dip Galvanized With Epoxy Coated Cable Duct Fittings With Cover Along With All Accessories Including Clamps ( For Every 2 Meters ) , Nuts, Bolts, & Washers As Per The Installation Standard ( Refer Tp-1Zzza-Ic-Std-0001_Pg. No.16-47 ) Including Tpi Charges, Packing & Forwarding, Documentation, Inspection & Testing, Special Tools & Tackles ( Mr Reference:Tp-1Zzza-Ic-Rfq-0018_D2 ) 132 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Equal Tee W1000mm X H400mm With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 133 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Equal Tee W800mm X H300mm With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 134 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Equal Tee W600mm X H300mm With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 135 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Equal Tee W400mm X H200mm With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 136 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Duct Expander Tee W800mm X W1000 X W800 X H400mm With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 137 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Duct Expander Tee W600mm X W1000 X W600 X H400mm With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 138 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Duct Expander Tee W600mm X W800 X W600 X H300mm With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 139 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Duct Expander Tee W400mm X W600 X W400 X H200mm With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 140 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Duct Reducer Tee W1000mm X W800 X W1000 X H400mm With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 141 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Duct Reducer Tee W1000mm X W600 X W1000 X H400mm With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 142 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Duct Reducer Tee W1000mm X W400 X W1000 X H400mm With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 143 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Duct Reducer Tee W800mm X W600 X W800 X H300mm With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 144 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Duct Reducer Tee W800mm X W400 X W800 X H300mm With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 145 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Duct Reducer Tee W600mm X W400 X W600 X H300mm With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 146 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Duct Width Reducer W1000mm X W800mm X H300mm Including Clamps, Nuts, Bolts & Washers 147 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Duct Width Reducer W1000mm X W600mm X H300mm Including Clamps, Nuts, Bolts & Washers 148 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Duct Width Reducer W1000mm X W400mm X H200mm Including Clamps, Nuts, Bolts & Washers 149 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Duct Width Reducer W800mm X W600mm X H300mm Including Clamps, Nuts, Bolts & Washers 150 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Duct Width Reducer W800mm X W400mm X H200mm Including Clamps, Nuts, Bolts & Washers 151 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Duct Width Reducer W600mm X W400mm X H200mm Including Clamps, Nuts, Bolts & Washers 152 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Duct Height Reducer W1000mm X H400mm X H300mm Including Clamps, Nuts, Bolts & Washers 153 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Duct Height Reducer W1000mm X H400mm X H200mm Including Clamps, Nuts, Bolts & Washers 154 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Duct Height Reducer W800mm X H300mm X H200mm Including Clamps, Nuts, Bolts & Washers 155 Supply Of Hot Dip Galvanized Cable Duct Fitting With Cover - Duct Height Reducer W600mm X H300mm X H200mm Including Clamps, Nuts, Bolts & Washers 156 Lot-2 : Frp Perforated Cable Trays 50Mm ( W ) X 50Mm ( H ) X 4Mm ( T ) With Cover Along With All Accessories Including Coupler Plates, Clamps ( For Every 2 Meters ) , Nuts, Bolts, & Washers As Per The Installation Standard ( Refer Tp-1Zzza-Ic-Std-0001_Pg. No.48-59 ) Including Tpi Charges, Packing & Forwarding, Documentation, Inspection & Testing, Special Tools & Tackles ( Mr Reference:Tp-1Zzza-Ic-Rfq-0018_D2 ) 157 Supply Of Frp Perforated Cable Trays 50Mm ( W ) X 50Mm ( H ) X 4Mm ( T ) With Cover-Straight Run Of 2.5 Meters Including Clamps, Nuts, Bolts & Washers 158 Supply Of Coupler Plates ( For Every 2.5 Meters ) Including Clamps, Nuts, Bolts & Washers 159 Lot-2 : Frp Perforated Cable Trays 100Mm ( W ) X 50Mm ( H ) X 5Mm ( T ) With Cover Along With All Accessories Including Fittings, Coupler Plates, Clamps ( For Every 2 Meters ) , Nuts, Bolts, & Washers As Per The Installation Standard ( Refer Tp-1Zzza-Ic-Std-0001_Pg. No.48-59 ) Including Tpi Charges, Packing & Forwarding, Documentation, Inspection & Testing, Special Tools & Tackles ( Mr Reference:Tp-1Zzza-Ic-Rfq-0018_D2 ) 160 Supply Of Frp Perforated Cable Trays 100Mm ( W ) X 50Mm ( H ) X 5Mm ( T ) With Cover-Straight Run Of 2.5 Meters Including Clamps, Nuts, Bolts & Washers 161 Supply Of Frp Perforated Cable Tray Fitting With Cover 100Mm ( W ) X 50Mm ( H ) -90 Degree Vertical Outside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 162 Supply Of Frp Perforated Cable Tray Fitting With Cover 100Mm ( W ) X 50Mm ( H ) -90 Degree Vertical Inside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 163 Supply Of Frp Perforated Cable Tray Fitting With Cover 100Mm ( W ) X 50Mm ( H ) -90 Degree Horizontal Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 164 Supply Of Coupler Plates ( For Every 2.5 Meters ) Including Clamps, Nuts, Bolts & Washers 165 Lot-2 : Frp Perforated Cable Trays 150Mm ( W ) X 50Mm ( H ) X 5Mm ( T ) With Cover Along With All Accessories Including Fittings, Coupler Plates, Clamps ( For Every 2 Meters ) , Nuts, Bolts, & Washers As Per The Installation Standard ( Refer Tp-1Zzza-Ic-Std-0001_Pg. No.48-59 ) Including Tpi Charges, Packing & Forwarding, Documentation, Inspection & Testing, Special Tools & Tackles ( Mr Reference:Tp-1Zzza-Ic-Rfq-0018_D2 ) 166 Supply Of Frp Perforated Cable Trays 150Mm ( W ) X 50Mm ( H ) X 5Mm ( T ) With Cover-Straight Run Of 2.5 Meters Including Clamps, Nuts, Bolts & Washers 167 Supply Of Frp Perforated Cable Tray Fitting With Cover 150Mm ( W ) X 50Mm ( H ) -90 Degree Vertical Outside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 168 Supply Of Frp Perforated Cable Tray Fitting With Cover 150Mm ( W ) X 50Mm ( H ) -90 Degree Vertical Inside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 169 Supply Of Frp Perforated Cable Tray Fitting With Cover 150Mm ( W ) X 50Mm ( H ) -90 Degree Horizontal Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 170 Supply Of Coupler Plates ( For Every 2.5 Meters ) Including Clamps, Nuts, Bolts & Washers 171 Lot-2 : Frp Ladder Cable Tray 300Mm ( W ) X 150Mm ( H ) X 5Mm ( T ) With Cover Along With All Accessories Including Fittings, Coupler Plates, Clamps ( For Every 2 Meters ) , Nuts, Bolts, & Washers As Per The Installation Standard ( Refer Tp-1Zzza-Ic-Std-0001_Pg. No. 60-79 ) Including Tpi Charges, Packing & Forwarding, Documentation, Inspection & Testing, Special Tools & Tackles ( Mr Reference:Tp-1Zzza-Ic-Rfq-0018_D2 ) 172 Supply Of Frp Ladder Cable Trays 300Mm ( W ) X 150Mm ( H ) X 5Mm ( T ) With Cover-Straight Run Of 2.5 Meters Including Clamps, Nuts, Bolts & Washers 173 Supply Of Frp Ladder Cable Tray Fitting With Cover 300Mm ( W ) X 150Mm ( H ) -90 Degree Vertical Outside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 174 Supply Of Frp Ladder Cable Tray Fitting With Cover 300Mm ( W ) X 150Mm ( H ) -90 Degree Vertical Inside Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 175 Supply Of Frp Ladder Cable Tray Fitting With Cover 300Mm ( W ) X 150Mm ( H ) 90 Degree Horizontal Bend With Bending Radius Of 450Mm Including Clamps, Nuts, Bolts & Washers 176 Supply Of Coupler Plates ( For Every 2.5 Meters ) Including Clamps, Nuts, Bolts & Washers 177 Lot-2 : Frp Cable Ducts 400Mm ( W ) X 200Mm ( H ) X 6Mm ( T ) With Cover Along With All Accessories Including Partition Plates, Fittings, Coupler Plates, Clamps ( For Every 2 Meters ) , Nuts, Bolts, & Washers As Per The Installation Standard ( Refer Tp-1Zzza-Ic-Std-0001_Pg. No.16-47 ) Including Tpi Charges, Packing & Forwarding, Documentation, Inspection & Testing, Special Tools & Tackles ( Mr Reference:Tp-1Zzza-Ic-Rfq-0018_D2 ) 178 Supply Of Frp Cable Ducts 400Mm ( W ) X 200Mm ( H ) X 6Mm ( T ) With Cover-Straight Run Of 2.5 Meters Including Clamps, Nuts, Bolts & Washers 179 Supply Of Frp Cable Duct Fitting With Cover - 400 ( W ) X 200 ( H ) - 90 Degree Elbow Horizontal Plane Including Clamps, Nuts, Bolts & Washers 180 Supply Of Frp Cable Duct Fitting With Cover - 400 ( W ) X 200 ( H ) - 90 Degree Vertical Plane Elbow Joins Up Including Clamps, Nuts, Bolts & Washers 181 Supply Of Frp Cable Duct Fitting With Cover - 400 ( W ) X 200 ( H ) - 90 Degree Vertical Plane Elbow Joins Down Including Clamps, Nuts, Bolts & Washers 182 Supply Of Coupler Plates ( For Every 2.5 Meters ) Including Clamps, Nuts, Bolts & Washers 183 Supply Of End Plates Including Clamps, Nuts, Bolts & Washers 184 Supply Of Partition Plate For Frp Cable Ducts 400Mm ( W ) X 200Mm ( H ) Along With Nuts And Bolts 185 Lot-2 :Frp Cable Ducts 600Mm ( W ) X 300Mm ( H ) X 6Mm ( T ) With Cover Along With All Accessories Including Partition Plates, Fittings, Coupler Plates, Clamps ( For Every 2 Meters ) , Nuts, Bolts, & Washers As Per The Installation Standard ( Refer Tp-1Zzza-Ic-Std-0001_Pg. No.16-47 ) Including Tpi Charges, Packing & Forwarding, Documentation, Inspection & Testing, Special Tools & Tackles ( Mr Reference:Tp-1Zzza-Ic-Rfq-0018_D2 ) 186 Supply Of Frp Cable Ducts 600Mm ( W ) X 300Mm ( H ) X 6Mm ( T ) With Cover-Straight Run Of 2.5 Meters Including Clamps, Nuts, Bolts & Washers 187 Supply Of Frp Cable Duct Fitting With Cover -600Mm ( W ) X 300Mm ( H ) - 90 Degree Elbow Horizontal Plane Including Clamps, Nuts, Bolts & Washers 188 Supply Of Frp Cable Duct Fitting With Cover -600Mm ( W ) X 300Mm ( H ) - 90 Degree Vertical Plane Elbow Joins Up Including Clamps, Nuts, Bolts & Washers 189 Supply Of Frp Cable Duct Fitting With Cover -600Mm ( W ) X 300Mm ( H ) - 90 Degree Vertical Plane Elbow Joins Down Including Clamps, Nuts, Bolts & Washers 190 Supply Of Coupler Plates ( For Every 2.5 Meters ) Including Clamps, Nuts, Bolts & Washers 191 Supply Of End Plates Including Clamps, Nuts, Bolts & Washers 192 Supply Of Partition Plate For Frp Cable Ducts 600Mm ( W ) X 300Mm ( H ) Along With Nuts And Bolts 193 Total In Figures
