Tender For Maintenance Of Resource Recovery Park In Pullambadi Town Panchayat., pullambadi-Tamil Nadu

Tender For Maintenance Of Resource Recovery Park In Pullambadi Town Panchayat.; 1 Plaincement Concrete 1:2:4 Mix ( One Cement, Two M Sand And Four Coarse Aggregate ) Using 20Mm Iss Hbg Metal For Foundation And Basement Including Dewatering If Found Necessary And Laid In Layer Of Not More Than 15Cm Thick And Consolidated Including All Cost Conveyance Of Materials And Labour Charges Etc. Complete As Per Standard Specifications And As Directed By Departmental Engineers ( Tnbp No.28 ) . 2 Weathering Course With Broken Brick Jelly 20Mm Size Pure Slacked Lime Over R.C.C. Roof Slab The Preparation Of 32:12.5 For Required Depth And Slope Etc.Complete. 3 Finishing The Top Of Roof With One Course Of Machine Pressed Tiles 23 C.M X 23 C.M X 2 C.M Size Using Cement Mortor 1:3 Mix Mixed With 2% By Weight Of Crude Oil And Pointing With Cement Mortor 1:3 Mix Cost Of All Materials And Labour Charges And Brick Jelly Concrete Etc., Complete As Per Standard Specifications. 4 Supplying And Fixing Over The Floors Best Quality Of Scratch Ceramic Tiles Of 30 C.M X 30C.M X 6Mm Sizeof Approved Colour Laying With Cement Mortor 1:3 Mix Pointing The Joints With Colour Pigments Etc. Complete With Standard Specification And As Directed By The Departmental Officers Etc., 5 Dadooing Walls Withglazed Tiles Of Sizes 305Mm X200mm X 6Mm Size Of Approved Make And Quality And Colour L Set In Cement Mortar 1:2 ( One Cement , Two Sand ) Over 10 Mm Base Layer Plastering And Pointing With White Cement Neatly As Directed. 6 Supplying, Fabricating And Fixing In Position Ofmild Steel Door With Single / Double Shutters Using M.S Angle Of Size 40 X 40 X 6Mm For Outer Framesand35 X 35 X 5Mm For Shutter Frames, Fully Covered With M.S Sheet Of 18 Gauge With M.S Flat Ofsize 32 X 6 Mmfor Internal Stiffners And One Number Of Aldrop , Two Numbers Of Tower Bolts, Holdfasts, Hinges, Handles Etc., Including Providing One Coat Of Red Oxide Primer. The Rates Shall Inclusive Of Cost Of All Materials Labour Charges For Fixing The Door In Position By Dismantling The Masonry, Concrete Etc. And Redoing The Sameto The Original Condition Duly Packed With Concrete Etc., Complete As Per Standard Specification. 7 Providing Upvc ( Un-Plasticized Polyvinyl Chloride ) Door: Providing And Fixing Casement Doors Fabricated From Un-Plasticized Polyvinyl Chloride ( Upvc ) Sections.Profiles: The Profiles Should Be Three Chamber System Which Provides High Insulation Properties With Outer Frame 60Mm X 55Mm With An Outer Wall Thickness Of 2.4Mm. The Window Unit Should Be Designed With All Corner Joints Mitred And Fusion Welded. Windows Should Be Steel Reinforced With 25 X 24 X 25Mm Steel Reinforcement With A Thickness Of 1Mm To Have Dimensional Stability. The Sash Should Be Of 60 X102mm. The Mullion Should Be Of 60 X 74Mm. The Profiles Should Have Co-Extruded Seals.Hardware: All The Hardware Like Friction Stays, Handles Should Be Screwed With Self Tapping Screws. The Handles, Locks Should Be Designed So That They Cannot Be Released From Outside. Glazing: The Window System Should Be Glazed With 5Mm Plain Float Glass / 6Mm Bison Lam Installation: The Profiles Should Be Cut To Length And Welded 45 Degrees. The Window Should Be Designed Such That The Water Drainage Does Not Pass Through The Reinforcement Chamber. The Window System Should Be Fixed Directly To The Plastered Brick Wallusing Self Expanding Nylon Plug And Driving Ms Electroplated Screws Into Plug. 8 Supply And Fixing Of Galvalum Sheet Roofing 0.6Mm Thick Of Approved Quality By Drilling Holes ( And Not By Punching ) With Necessar Y J / U Bolts And Nuts Of 8Mm Dia Of Suitable Length And Providing 1 Set Of Bitumen Washer Of 25Mm Dia And 1.60Mm Thick For Each Bolt Including Protecting Portion Of Bolts In Roof Shall Be Covered With Bitumen Compound Etc Completed Complying With Standard Specification As Per Tnbp No. 49 9 Painting Two Coats Of Newly Plastered Wall Surface With Ready Mixed Plastic Emulsion Paint Of First Class Quality And Of Approved Colour Over A Priming Coat Including Thorough Scrapping, Clean Removal Of Dirt, And Including Necessary Plaster Of Paris, Putty, Wherever Required Etc., Complete Complying With Standard Specification. 10 Wiring With 2X1.5 Sqmm ( 22 / 0.3 ) Pvc Insulated Sc.Unsheathed Cu. Conductor Of 1100 V Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling With Pvc Accessories And With Tw Switch Box And 5A F.T. Switch With Paintingof Suitable Colourfor Open Pvc Light Point / Fan Point ( For Electronic Regulator ) ( 5 Points Per Coil ) Sd 24 11 Wiring With 2X1.5Sqmm ( 22 / 0.3 ) Pvc Insulated Sc Unsheathed Cu.Conductor Of 1100 V Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling With Pvc Accessories With 150 Mm X 100 Mm X 113Mm Tw Switch Box In Flush With Wall With 3 Mm Thick Hylem Sheet Cover For 5 A 3 Pin Non Inter Locking Cs Plug With Painting Of Suitable Colour With Continuous Earth Wire Connection Of 14 Swg Tc Wire For Open Pvc Plug Point.Sd 37 12 Supply And Fixing Of Single Box Type 440 W Flu Fitting Complete With Copper Choke And Condensor With Tw Round Blocks On Wall Or Ceiling With Flu Tube With Pvc Unsheathed Copper Leads From Terminals To The Fitting. Sd 88

Refer document

INR 4120.0 /-

INR 4.12 Lakhs /-