Tender For Installation Of 100 Mm Pipeline With Metering Arrangements At Madhuban, madhuban-Assam

Tender For Installation Of 100 Mm Pipeline With Metering Arrangements At Madhuban => Limited- 1 Installation of Gas Receiving Terminal inside OIL CCGS, Madhuban 2 Installation of 150 mm N.B. MS Pipe 3 Installation of 100 mm N.B. MS Pipe 4 Installation of 150 mm WN Flange (300 Class) 5 Installation of 150 mm x 100 mm N.B. MS Reducer 6 Installation of 150 mm N.B. MS Elbow (90°) 7 Installation of 100 mm N.B. MS Elbow (90°) 8 Installation of 150 mm N.B. MS Equal Tee 9 Installation of 150 mm N.B. Valve (300 Class) 10 Installation of 100 mm N.B. Valve (300 Class) 11 Installation of 100 mm N.B. Insulating Gasket 12 Installation of 150 mm N.B. Orifice/USM Meter with welding of WN Flanges and installation of metering instruments, etc. 13 Installation of 1/2 MS Socket with Needle Valve 14 Fabrication and Fixing of 100 mm MS Pipe Support including grouting. 15 Installation of RCC Pipe support including grouting 16 PCC works 17 Installation of a Steel Shade for protection of the meter from rain and sunlight 18 Pipeline crossing of 100 mm N.B. Pipeline 19 Hydrotesting of the metering arrangement at a pressure of 30 kg/sq.cm for 06 (six) hours 20 Nitrogen Filling and commitioning of the Metering arrangement. 21 Cleaning, painting overground pipelines and final site restoration works and any other miscellaneous works. 22 Installation of Gas Delivery Terminal at 1 No. Borpathar Gaon on AGCLs Land 23 Installation of 100 mm N.B. MS Pipe 24 Installation of 100 mm N.B. WN Flange (300 Class) 25 Installation of 100 mm N.B. Orifice Flange 26 Installation of 100 mm N.B. MS Elbow (90°) 27 Installation of 100 mm N.B. MS Equal Tee 28 Installation of 100 mm N.B. Valve (300 Class) with welding of WN Flanges. 29 Installation of Trasition Fitting on 100 mm N.B. Pipeline 30 Fabrication and Installation of Liquid Separator with other connection as per drawing ( M.S. Pipe, Flanges, valves and Stud & Nut will be supplied by AGCL. Contractor has to supply the required End Caps.) 31 Fabrication and Fixing of 100 mm MS Pipe Support including grouting. 32 Installation of RCC Pipe support including grouting 33 Installation of Needle Valve 34 Hydrotesting of the metering arrangement at a pressure of 30 kg/sq.cm for 06 (six) hours 35 Intallation of steel shead over the 100 mm USM meter for protecting the meter from direct sunlight and rain. 36 Nitrogen Filling and commissioning of the Metering arrangement. 37 Earth filling on the ROU of the pipeline 38 PCC works 39 100 mm N.B. MS Pipeline Laying work from CGGS, Madhuban to 1 No. Borpathar Gaon PRS Point. 40 Installation of 100 mm N.B. MS Pipe 41 Fabrication and Installation of Pig Launcher/Receiver as per drawing. 42 Installation of 100 mm N.B. MS Equal Tee 43 Installation of 100 mm N.B. Valve (300 Class) with Flanges 44 Preparation and installation of 100 mm N.B. Cold Bends 0 to 90° 45 Nullah Crossing with offset bends for 100 mm N.B. Pipe 46 Coating Repairing of 100 mm N.B. Pipeline 47 Installation of 100 mm N.B. Insulating Joint (IJ) 48 Pipeline crossing of 100 mm N.B. Pipeline 49 Nullah Crossing with casing for 100 mm N.B. Pipeline 50 OIL boundary wall crossing for 100 mm N.B. Pipeline 51 Earth filling on the ROU of the pipeline 52 Supply and installation of the RCC Marker Post on the ROU of the pipeline. 53 Air Pigging and cleaning of the newly constructed 100 mm N.B. Pipeline Portion 54 Hydrotesting of the entire section of the pipeline 55 Nitrogen Purging and commitioning of the Pipeline

Refer document

Refer document

Refer document