Supply Of Street Lights Accessories, Repair And Maintenance Of Mini Mast System At Mysore Road Junction In Mananthavady Municipality, Wayanad ( Proj.No 05-24- 1 Work Name : Supply of street lights accessories to Mananthavady Municipality, Wayanad (Proj.No: 05/24) 2 Street light accessories 3 od209211/2023_2024 : Supply of insulation tape having dimensions 19mm x 20 mtr with 0.13 mm thickness 4 od209233/2023_2024 : 2.5 sq.mm ISI marked FRLS PVC insulated single core copper conductor cable 5 od209296/2023_2024 : Supply of LDR with maximum rated load of 10 A having a power frequency of 50 Hz operated in 220-240V AC power supply 6 od209300/2023_2024 : Supply of 36W LED Driver with IP66 protection havingInput Voltage of 220-240V, operated with a current less than 0.174A and output voltage of DC 25-70V, power factor greater than 0.9. 7 od209326/2023_2024 : Supply of 50W LED Driver with IP66 protection havingInput Voltage of 85-300V, operated with a current of 0.24A and output voltage of DC 21-36V, power factor greater than 0.35. 8 Work Name : Repair and Maintenance of Mini Mastsystem at Mysore road Junction in Mananthavady Municipality. 9 ELECTRICAL WORK 10 90.15.4.9 : Supply Conveyance, installation, testing and commissioning of 150W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea withpower factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance(LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 11 90.14.1.2 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc. 12 90.14.3.2 : Supply and providing heavy duty A section neoprene gasket in the panel board 13 od212702/2023_2024 : Supply and fixing of 25A 2 Pole AC 1 rated power contactor, 25A Connector, Digital timer, Suitable Copper socket, 2.5 sq. mm ISI marked FRLS PVC insulated single core copper conductor cable, 1.5 sq. mm ISI marked FRLS PVC insulated single core copper conductor cable. 14 od212704/2023_2024 : Supply and fixing of HRC fuse base of 20/32A using suitable nut and bolt, 32A 2-way neutral link mounted on DMC/SMC base and 2.5Sqmm ISI marked FRLS PVC insulated single core copper conductor cable. 15 2.14.2 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 16 2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole 17 2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 18 2.12.1 : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 19 90.6.5.12 : Supply and drawing the following sizes of multi-core PVC insulated & FRLSPVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 20 90.6.5.11 : Supply and drawing the following sizes of multi-core PVC insulated & FRLSPVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. 21 9.1.1 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)
