Supply, Delivery, Installation And Hand Hold Demonstration Of Different Equipments , Machineries To Test Hdpe Pipes As Per Is- 4984-2016 At The Pipe Testing Laboratory At Nababhat Under Burdwan Division, Phe. Dte._2Nd Call- 1 Supply, Delivery, Installation & Hand Hold Demonstration Of Carbon Black Content Apparatus For Testing Hdpe Pipes As Per Astmd: 1603-14, Is: 4984-2016 And Is: 2530. [ The Equipment Should Be Consist Of Combustion Boat Made Out Of Porcelain Having A Dimension Of 75 Mm Length, 9 Mm Width & 9Mm Height. A Combustion Tube Made Out Of Quartz Glass Approx. 30Mm Dia. And 400Mm Length. A Gas Flow Meter For Measuring And Contrilling The Rate Of Flow Of Nitrogen Within 1.7 ± 0.3 Ltrs / Min. A Digital Temperature Pid Controller Cum Indicator Range Ambient To 900°C. A Furnace To Accommodate The Combustion Tube And Capable Of Maintaining Temperature Upto 550°C And 1 No. Each Hot And Cold Water Traps For Keeping The Trichloroethelene And Dry Ice Etc. Along With Nitrogen Cylinder With Regulator And, Trichloroelene Chemical ] As Per Direction Of Eic. ( Rates Should Be Inclusive Of All Taxes And Other Charges ) . Note : Minimum Warranty Period For 06 ( Six ) Months. 2 Supply, Delivery, Installation & Hand Hold Demonstration Of Carbon Black Dispersion Apparatus For Testing Hdpe Pipes As Per Is: 4984-2016 And Is: 4985. [ The Equipment Should Be Consist Of A Projection Microscope Capable Of Mignifying 200 Times ± 10, With A Field View Of 1 ± 1Mm Diameter Along With Slide Glass Etc. ] As Per Direction Of Eic. ( Rates Should Be Inclusive Of All Taxes And Other Charges ) . Note : Minimum Warranty Period For 06 ( Six ) Months. 3 Supply, Delivery, Installation & Hand Hold Demonstration Of Electronic Hot Plate With Electronic Digital Pid Temperature Controller Cum Indicator For Testing Hdpe Pipes As Per Is: 4984-2016 As Per Direction Of Eic. ( Rates Should Be Inclusive Of All Taxes And Other Charges ) . Note : Minimum Warranty Period For 06 ( Six ) Months. 4 Supply, Delivery, Installation & Hand Hold Demonstration Offully Automatic Melt Flow Index Apparatus For Testing Hdpe Pipes As Per Is: 4984-2016. [ Specification : Auto Cutting, Auto Weighing, Inbuilt Digital Weighing Balance With Accuracy Of 0.001 Gms., Auto Mfr Calculation, Window Based Software, Rs 232 Port To Interface With Computer, Temp Cont: Microcontroller Based Led Temperature Controller With Range Up To 400°C, Resolution Up To 0.1 Deg C & Accuracy Of ± 0.1 Deg C., Timer : With Range Up To 999.9 Seconds, Range Of Mfi : Upto 20 Gms / 10 Min., Weights: 21.6, 5.0 Kg Hard Chrome Plated Weights., Accessories: Orifice, Piston, Material Charger, Barrel Cleaner, Orifice Cleaner, Sample Cutter, On Completion Of Test Scrolling Display For All The Individual Results And Average Mfi Value, Transfer To Pc Or Computer For Record Or Print On Completion Of Test. Paint: Powder Coated, Power : 220V Ac / 50 Hz, Single Phase, Amperes: 4 Amps, Table Top Model. ] As Per Direction Of Eic. ( Rates Should Be Inclusive Of All Taxes And Other Charges ) . Note : Minimum Warranty Period For 06 ( Six ) Months. 5 Supply, Delivery, Installation & Hand Hold Demonstration Of Hand Operated Type Dumbell Cutting Press For Testing Hdpe Pipes As Per Is: 4984-2016 As Per Direction Of Eic. ( Rates Should Be Inclusive Of All Taxes And Other Charges ) . Note : Minimum Warranty Period For 06 ( Six ) Months. 6 Supply, Delivery, Installation & Hand Hold Demonstration Of Dumbell Cutting Die For Hdpe Pipes Upto 5Mm Thick Pipe ( Is: 4984-2016 ) For Testing Hdpe Pipes As Per Astmd: 1603-14, Is: 4984-2016 And Is: 2530 As Per Direction Of Eic. ( Rates Should Be Inclusive Of All Taxes And Other Charges ) . Note : Minimum Warranty Period For 06 ( Six ) Months. 7 ( A ) Type - I ( 150 ´ 20 Mm ) 8 ( B ) Type - Ii ( 115 ´ 25 Mm ) 9 ( C ) Type - Ii ( 75 ´ 10 Mm ) 10 Supply, Delivery, Installation & Hand Hold Demonstration Of Contour Cutter Machine For Sample Preparation ( To Prepare The Samples Of Upto 30 Mm Thickness ) For Testing Hdpe Pipes As Per Is: 4984-2016. [ Specification : 1600 Rpm Electric Motor, Anvil Cutter: 12Mm, Hi Speed Milling Tool To Prepare Test Specimen, Speed: Veriable By Ac Frequency Drive, Vacuum Dust Collection Facility, Paint: Powder Coating, Power Supply : 230 V Ac, 50 Hz. ] As Per Direction Of Eic. ( Rates Should Be Inclusive Of All Taxes And Other Charges ) . Note : Minimum Warranty Period For 06 ( Six ) Months. 11 Supply, Delivery, Installation & Hand Hold Demonstration Of Contour Cutter Templates Above 5 Mmfor Testing Hdpe Pipes As Per Is: 4984-2016 As Per Direction Of Eic. ( Rates Should Be Inclusive Of All Taxes And Other Charges ) . Note : Minimum Warranty Period For 06 ( Six ) Months. 12 ( I ) Type - I ( 150 X 20 Mm ) 13 ( Ii ) Type - Ii ( 115 X 25 Mm ) 14 ( I ) Type - Iii ( 250 X 100 Mm ) 15 ( I ) Type - A ( 180 X 60 Mm ) 16 ( I ) Type - B ( 180 X 80 Mm )
