Repairs Of Wooden Furniture And Polishing At Mil Stn Kota- 1 Chair Dining FD 203, 228, 279 & 1115Removing of old unserviceable following parts from chair dining and supply & fixing new same parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol & including tightening of other joints and applying french polishing on all exposed wooden surfaces & including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified & directed and shown on drawings: - 2 Front leg (Left or Right) required as per drg. 3 Rear leg (Left or Right) required as per drg. 4 Front/back/right/left side rail with holes for canningrequired as per drg. 5 Stiffner bottom (side/centre) required as per drg. 6 Back rest required as per drg. 7 S&F in renewal of new hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings. 8 Recaning of repaired chair dining with best quality of approved plastic cane of white or cream ivory shade, 2 mm wide and 0.4 mm thick, complete all as specified, directed and shown on drawings. 9 Applying french polishing with high gloss & including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired chair dining (new and old parts), complete all as specified and directed. 10 Chair Writing FD - 20, 202, 250, 280Removing of old unserviceable following parts from chair writing and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol & including tightening of other joints and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: - 11 Front leg (Left or Right)required as per drg. 12 Rear leg (Left or Right) required as per drg. 13 Front/back/right/left side rail with holes for canning required as per drg. 14 Stiffner bottom (side/centre) required as per drg. 15 Back rest required as per drg. 16 Hand rest (Arms) required as per drg. 17 S&F in renewal of hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings. 18 Recaning of repaired chair writing with best quality of approved plastic cane of white or cream ivory shade, 2 mm wide and 0.4 mm thick, complete all as specified, directed and shown on drawings. 19 Applying french polishing with high gloss including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired chair writing (new and old parts), complete all as specified and directed. 20 Chair Easy FD - 17, 201, 229 & 1108Removing of old unserviceable following parts from chair easy and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: - 21 Front leg (Left or Right) required as per drg. 22 Rear leg (Left or Right) required as per drg. 23 Front/back/right/left side rail with holes for canning 24 Back rail (Top/bottom/left/right) of back frame with holes for canning as per drg 25 Stiffner bottom required as per drg. 26 Hand rest (Arms) required as per drg. 27 S&Fin renewal of hard PVC shoe of superior quality, fixed with screw, complete all as specified, directed and shown on drawings. 28 Recaning of repaired chair easy with best quality of approved plastic cane of white or cream ivory shade, 2 mm wide and 0.4 mm thick, complete all as specified, directed and shown on drawings. 29 Applying french polishing with high gloss including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired chair easy (new and old parts), complete all as specified and directed. 30 Chair BKB FD - 56, 225 & SIMILAR PATTERN 31 S & F in renewal of seat made of 6mm thick commercial plywood BWR grade, ISI marked complete all as specified, directed and shown on drawings. 32 S & F in renewal of rear leg made of 1st class teakwood duly shaped as per drawing to match with existing part complete all as specified, directed and shown on drawings. 33 S & F in renewal of front leg made of 1st class teakwood duly shaped as per drawing to match with existing part complete all as specified, directed and shown on drawings. 34 All as per Srl item No 4.03 (here-in-before) but bottom stiffners of chair. 35 All as per Srl item No 4.03 (here-in-before) but front/ rear/side rails of chair. 36 All as per Srl item No 4.03 (here-in-before) but stiffner of back support of chair. 37 STOOL DRESSING CB DB-3980, FD-27(M), 282 38 S & F in renewal of leg made of first class hard teak wood (Shisham) duly shaped as per drawing and fixed in position with other member by fevicol and bamboo pins to match with existing part, complete all as specified, directed and shown on drawings. 39 All as per Srl item No 5.01 (here-in-before) but long rail of stool. 40 All as per Srl item No 5.01 (here-in-before) but short rail of stool. 41 All as per Srl item No 5.01 (here-in-before) but stiffner of stool. 42 Recaning of repaired stool with best quality of approved plastic cane of white or cream ivory shade, 2 mm wide and 0.4 mm thick woven in mat pattern and border with 4mm wide cane complete all as specified, directed and shown on drawings. 43 Applying french polishing with high gloss & including cleaning and preparing the surface with one or more coats to entire exposed wooden surfaces of repaired stool (new and old parts), complete all as specified and directed. 44 Table centre FD-29, 235, 274, 375Removing of old unserviceable following parts from table centre and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: - 45 Long rail required as per drg 46 short rail (Left or Right) required as per drg 47 Leg required as per drg 48 Stiffener (short/long) required as per drg 49 L type wooden bracket made of size 60x60x30mm thick to be fixed in the corner joints of table required as per drg 50 Supply & fixing in renewal of top made of 18/19 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (Shisham wood) beading allround the top, complete all as specified, directed and shown on drawings. 51 Teapoy FD - 232, 278 & 382Removing of old unserviceable following parts from teapoy FD and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: - 52 Leg of teapoy required as per drg 53 Front or back long rail required as per drg 54 L type wooden bracket made of size 60x60x30mm thick to be fixed in the corner joints of table required as per drg 55 Stiffener (short/long) required as per drg 56 Supply & fixingin renewal of top made of 18/19 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (Shisham wood) beading allround the top, complete all as specified, directed and shown on drawings. 57 Table Peg FD- 25, 253, 277, 384Removing of old unserviceable following parts from table peg and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: - 58 Long rail of table peg required as per drg 59 Leg required as per drg 60 Stiffener (short/long) required as per drg 61 L type wooden bracket made of size 60x60x30mm thick to be fixed in the corner joints of table required as per drg 62 Supply & fixingin renewal of top made of 18/19 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (Shisham wood) beading allround the top, complete all as specified, directed and shown on drawings. 63 Table 900x600x760MMwith or without drawerFD- 208, 209, 223, 224, 241, 242, 283, 284Removing of old unserviceable following parts from table 900x600x760mm and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: - 64 Long rail required as per drg 65 Short rail required as per drg 66 L type wooden bracket made of size 60x60x30mm thick to be fixed in the corner joints of table required as per drg 67 Leg required as per drg 68 Stiffener (side/centre) required as per drg 69 New drawer & including aluminum anodised knob as per drg 70 Supply & fixingin renewal of top made of 18/19 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (Shisham wood) beading allround the top, complete all as specified, directed and shown on drawings. 71 Table dining 6 Persons FD- 30, 239, 273, FD/MAP-II/03Removing of old unserviceable following parts from table dining 06 pers and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: - 72 Front or back long rail required as per drg 73 Side rail (Left or Right) required as per drg 74 Leg for table dining 06 pers required as per drg 75 L type wooden bracket made of size 100x100x35mm thick to be fixed in the corner joints of table required as per drg 76 Supply & fixingin renewal of top made of 18/19 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (Shisham wood) beading allround the top, complete all as specified, directed and shown on drawings. 77 Table dining 1200x900x760MM,FD/MAP-II/03Removing of old unserviceable following parts from table dining 1200X900X760mm and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: - 78 Front or back long rail required as per drg 79 Short rail (Left or Right) required as per drg 80 Leg for table dining required as per drg 81 L type wooden bracket made of size 100x100x35mm thick to be fixed in the corner joints of table required as per drg 82 Supply & fixingin renewal of top made of 18/19 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (Shisham wood) beading allround the top, complete all as specified, directed and shown on drawings. 83 Table dining 8 Persons FD- 30, 239, 273, FD/MAP-II/03Removing of old unserviceable following parts from table dining 08 pers and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: - 84 Front or back long rail required as per drg 85 Side rail (Left or Right) required as per drg 86 Leg for table dining 08 pers required as per drg 87 L type wooden bracket made of size 100x100x35mm thick to be fixed in the corner joints of table required as per drg 88 Supply & fixingin renewal of top made of 18/19 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (Shisham wood) beading allround the top, complete all as specified, directed and shown on drawings. 89 Table writing FD-33, 249, 268, 275Removing of old unserviceable following parts from table writing and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: - 90 Leg (Left / right side) required as per drg 91 Long rail required as per drg 92 Short rail required as per drg 93 Stiffener short/long required as per drg 94 Replacement new back ply 6 mm thick, 7 ply BWR grade ply wood ISI marked required as per drg. 95 Replacement ofleft/ right side, shelve of box of table made of 18/19 mm thick prelaminated MDF board, both side natural Shisham shade including 4 mm thick Shisham wood beading, complete all as specified, directed and shown on drawings. 96 Replacement of shutter of table writing using 18/19 mm thck prelaminated MDF board, exterior grade ISI marked both side laminated including 4mm Shisham wood beading required as per drg including continuous piano hinge, knob and 4 lever brass mortice lock. 97 Replacement of drawers of box of table writingrequired as per drg (MDF board, 6mm thick commercial plywood) including 4mm Shisham wood beading, aluminum anodised knob. 98 Supply & fixing in renewal of top made of 18/19 mm thick prelaminated MDF board, exterior grade, ISI marked, duly fixed with 4 mm thick first class hard wood (Shisham wood) beading allround the top, complete all as specified, directed and shown on drawings. 99 Side board FD-26, 241, 242, 371 & 1112 100 Removing of old unserviceable broken door/shutter from side board and supply and fix new shutter made of 18/19 mm thick prelaminated MDF board including 4 mm thick first class hard wood Shisham wood beading alround the shutter and fixing in position with MS piano hinges of suitable flap width and providing one No. anodised aluminium knob, complete all as specified, directed and shown on drawings.Note :- Each shutter will be measured as single unit. 101 Removing of old unserviceable Left or right side and S&F new Left or right side made of prelaminated MDF board 18/19 mm thick, exterior grade, ISI marked, both side laminated and fixing in position, complete all as specified, directed and shown on drawings. 102 Removing of old unserviceable bottom base of side board and S&F new prelaminated MDF board 18/19 mm thick exterior grade, ISI marked, both side laminated and fixing in position, complete all as specified, directed and shown on drawings. 103 Removing of old unserviceable shelf of side board and S&F new prelaminated MDF board 18/19 mm thick exterior grade, ISI marked, both side laminated and fixing in position, complete all as specified, directed and shown on drawings. 104 Removing old unserviceable back ply from side board S&F back ply of 6mm thick BWR grade both side commercial, ISI marked and fixing in position, complete all as specified, directed and shown on drawings. 105 Removing old unserviceable leg and batten of side board S&F New leg and batten of 1st class Hardwood (Shisham wood) and fixing in position with screw / Nails all as showsn on drg and a directed. 106 Removing old unserviceable / broken knob from side board and S&F New aluminium anodised knob of 38 to 40mm dia and fixed with machine made screws, complete all as specified, directed and shown on drawings. 107 Removing old unserviceable / broken handle from side board and S&F New new steel bow handle of 100mm long SS finish superior quality fixed with machine made screws, complete all as specified, directed and shown on drawings. 108 Removing old unserviceable drawer from side board andS&F New drawer including aluminum anodised knob in position, complete all as specified, directed and shown on drawings. 109 Removing of unserviceable/broken top from side board and supply & fixing new top made of 18/19 mm thick prelaminated MDF board, exterior grade, ISI marked duly fixed with 4 mm thick first class hard wood (Shisham wood) beading alround the top, complete all as specified, directed and shown on drawings. 110 SOFA SET THREE SEATER LONG PIECE FD-258, 281, 1113, FD/MAP-II/02 111 S & F in renewal of leg made of first class hard teak wood (Shisham) duly shaped as per drawing and fixed in position with other member by fevicol and bamboo pins to match with existing part, complete all as specified, directed and shown on drawings. 112 All as per Srl item No 15.01 (here-in-before) but side plank of sofa. 113 All as per Srl item No 15.01 (here-in-before) but bottom stiffner support of sofa. 114 All as per Srl item No 15.01 (here-in-before) but arm rest of sofa. 115 All as per Srl item No 15.01 (here-in-before) but centre stiffner of seat & back of sofa. 116 S & F in renewal of plywood made of 12mm thick commercial ply, BWR grade, ISI marked of seat/back of sofa set complete all as specified, directed and shown on drawings. 117 SOFA CHAIR SINGLE SEATER FD-258, 281, 1113, FD/MAP-II/02 118 S & F in renewal of leg made of first class hard teak wood (Shisham) duly shaped as per drawing and fixed in position with other member by fevicol and bamboo pins to match with existing part, complete all as specified, directed and shown on drawings. 119 All as per Srl item No 16.01 (here-in-before) but side plank of sofa. 120 All as per Srl item No 16.01 (here-in-before) but bottom stiffner support of sofa. 121 All as per Srl item No 16.01 (here-in-before) but arm rest of sofa. 122 All as per Srl item No 16.01 (here-in-before) but centre stiffner of seat & back of sofa. 123 S & F in renewal of plywood made of 12mm thick commercial ply, BWR grade, ISI marked of seat/back of sofa set complete all as specified, directed and shown on drawings. 124 CUSHION AND TAPESTARY OF SOFAFD-258, 281, 1113, FD/MAP-II/02 125 Removing the existing unserviceable cushion of sofa set and replacing with new foam cushion (40 Kg/Cum density) of size 21 X 22 X 4 duly covered with new superior quality tapestry cloth including mulmul cloth and chain in one side, complete all as specified, directed and shown on drawings.Note :- The tapastry cloth shall not be less than Rs. 400/- per metre and of design/pattern as approved by the GE. 126 S & F tapestry cloth for existing cushions of sofa set covered the cushion duly stiched with superior quality tapestry cloth, complete all as specified, directed and shown on drawings.Note :- The tapastry cloth shall not be less than Rs. 400/- per metre and of design/pattern as approved by the GE. 127 BED HARD/ BED PLY TOP(1980mmx900mmx660mm) FD-246/ 247Removing of old unserviceable following parts from bed hard/bed ply top and supply & fixing new parts made of first class hard wood (Shisham wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints, and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings: - 128 Long rail, 35x90 mm in section and length as per existing size of bed. 129 L type wooden bracket made of size 100x100x35 mm thick, to be fixed in the corner joints of long rails as per existing size of bed. 130 Complete headrest assembly with & including legs and finished with veneered ply of bed plywood top as per Drg 131 Complete footrest assembly with & including legs and finished with veneered ply of bed plywood top as per Drg 132 Stiffener, 40x60 mm in section and length as per existing size of bed 133 S&F 12mm thick plywood top of size 1920 to 1950 x900 mm, BWR Grade, approved quality in single piece without any joint to the bed frame with suitable screws wood/steel with cup washer including removal of damaged ply wood top, complete all as specified, directed and shown on drawings. 134 TABLE DRESSING LADIES FD-32(M), 251, 378 135 S & F in renewal of top of table dressing ladies made outof 18/19 mm thick pre-laminated MDF board with both side decorative choice lamination including providing 4 mm thick Shisham wood beading on front side, complete all as specified, directed and shown on drawings. 136 S & Fin renewal of side (Left or right) of table dressing ladies made outof 18/19 mm thick prelaminated MDF board with both side decorative choice lamination including providing 4 mm thick Shisham wood beading on front side, complete all as specified, directed and shown on drawings. 137 S & F in renewal of door made of 18/19 mm thick pre-laminated MDF board, exterior grade with one side teak faced and other white face & including providing 4 mm thick teak wood edging all round, complete all as specified, directed and shown on drawings. 138 S&F in renewal of sliding glass with & includingaluminium channel (2 way) shutter of Table dressing ladies made out of 4 mm thick selected quality glass including rounding of edges on all sides, complete all as specified, directed and shown on drawings.Note :- Each glass shutter shall be measured as single unit) 139 S & F in renewal of mirror frame of table dressing ladies made out of Ist class HW (Shisham) including key plate and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings. 140 S & F in renewal of back ply made of 4mm thick BWR grade 3 ply commercial plywood, complete all as specified, directed and shown on drawings. 141 Supply & fixing in renewal of looking mirror of table dressing ladies with 5 mm thick selected quality mirror, electro copper plated totally free from distortion and duly framed a teakwood alround, complete all as specified, directed and shown on drawings. 142 S & F in renewal of bottom base with legs made to shape and size of tabel dressing ladies, complete all as specified, directed and shown on drawings. 143 TABLE DRESSING LADIES INCL STOOL FD/MAP-11/07 144 S & F in renewal of top of table dressing ladies made outof 18/19 mm thick pre-laminated MDF board with both side decorative choice lamination including providing 4 mm thick Shisham wood beading on front side, complete all as specified, directed and shown on drawings. 145 S & Fin renewal of side (Left or right) of table dressing ladies made outof 18/19 mm thick prelaminated MDF board with both side decorative choice lamination including providing 4 mm thick Shisham wood beading on front side, complete all as specified, directed and shown on drawings. 146 S & F in renewal of door made of 18/19 mm thick pre-laminated MDF board, exterior grade with one side teak faced and other white face & including providing 4 mm thick teak wood edging all round, complete all as specified, directed and shown on drawings. 147 S&F in renewal of telescopic channel for drawer of table dressing ladies made of superior quality duly fixing with screws, complete all as specified, directed and shown on drawings. 148 S & F in renewal of mirror frame of table dressing ladies made out of Ist class HW (Shisham) including key plate and applying french polishing on all exposed wooden surfaces of replaced part including cleaning and preparing the surface including a coat of wood filler with one coat of french polish, complete all as specified, directed and shown on drawings. 149 S & F in renewal of back ply made of 4mm thick BWR grade 3 ply commercial plywood, complete all as specified, directed and shown on drawings. 150 Supply & fixing in renewal of looking mirror of table dressing ladies with 5 mm thick selected quality mirror, electro copper plated totally free from distortion and duly framed a teakwood alround, complete all as specified, directed and shown on drawings. 151 S & F in renewal of heavy duty revolving nylon wheel superior quality in base of stool of table dressing ladies, complete all as specified, directed and shown on drawings. 152 S & F in renewal of cushion of stool cushions shall be 360x310x75mm of 40 density covered with superior quality tapastery colour and shade, complete all as specified, directed and shown on drawings.Note :- The tapastry cloth shall not be less than Rs. 250/- per metre and of design/pattern as approved by the GE. 153 BIN LINEN MULTIPURPOSE FD/E6/MAP/09 154 S & F in renewal of steel bow handle of 100mm long SS finish of bin linen multipurpose, superior quality and fixed in existing position, complete all as specified, directed and shown on drawings. 155 S & F in renewal of drawer of bin linen multipurpose made of 18/19mm thick prelaminated MDF board, exterior grade, ISI marked, both side laminated withincluding PVC beading of superior quality (as per drawing) complete all as specified, directed and shown on drawings. 156 S & F in renewal of top of bin linen multipurpose made of 18/19mm thick prelaminated MDF board, exterior grade, ISI marked, both side laminated withincluding PVC beading of superior quality (as per drawing) complete all as specified, directed and shown on drawings. 157 S & F in renewal of back side of bin linen multipurpose made of 18/19mm thick prelaminated MDF board, exterior grade, ISI marked, both side laminated withincluding PVC beading of superior quality (as per drawing) complete all as specified, directed and shown on drawings. 158 S & F in renewal of left/right side/shelve of bin linen multipurpose made of 18/19mm thick prelaminated MDF board, exterior grade, ISI marked, both side laminated withincluding PVC beading of superior quality (as per drawing) complete all as specified, directed and shown on drawings. 159 S & F in renewal of door/shutter of bin linen multipurpose made of 18/19mm thick prelaminated MDF board, exterior grade, ISI marked, both side laminated, including D type handle with & including PVC beading of superior quality (as per drawing) complete all as specified, directed and shown on drawings. 160 S & F in renewal of bottom base of bin linen multipurpose made of 18/19mm thick prelaminated MDF board, exterior grade, ISI marked, both side laminated, including D type handle with & including PVC beading of superior quality (as per drawing) complete all as specified, directed and shown on drawings. 161 M&L for preparation of old previously treated exposed (Inside and outside) wooden surfaces by electric grinder/ scraping and filling bore holes with putty and finally rubbing with sand paper/abrasive cloth thoroughly for smooth and clean surface and applying one or more coats of french polish and over it and applying a coat of clear glossy wood finish (Touchwood), complete all as specified and as directed for the following wooden furniture articles: - 162 Bed plywood top FD-246 &247 163 Chair BKB 164 Bin multipurpose 165 Sofa Set 3 Seater (one piece)FD-281 166 Sofa chair single seater FD-281 167 Side BoardFD-26, 241 & 371 168 Table Peg FD-25 (M), 236, 277 & 384 169 Table Dressing Ladies with Mirror FD-32 & 251 170 Teapoy woodenFD- 34, 232, 278 & 382 171 Table centre/ Table centre 2 TierFD-29(M), 235 & 274 172 Table 900 x 600 x 760mm with or without drawerFD-42, 55, 224, 233, 283 & 284 173 Table dining 6 PersFD-30(M), 239 & 273 174 Table dining 8 PersFD-30(M), 239 & 273 175 Table dining 1200x 900 x 760mm, 4 PersFD-273 & FD/MAP-II/03 176 Table WritingFD-33, 249, 275
