Tender For Construction Of Toilet Blocks At Hindu Higher Secondary School In Ward No 11; 1 Earthworkexcavationfor Foundation In All Soils And Sub Soils To Full Depth As May Be Directed Except In Hard Rock Requiring Blasting Inclusive Of Shoring Shuttering, Baling Out Water Wherever Necessary, Refilling The Foundation With Excavated Earth And Depositing The Surplus Earth Within Compound In Places Shown By The Departmental Officers With An Initial Lead Of 10 Metre And Initial Lift Of2 Metre And Clearing And Leveling The Site Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. 2 Earthwork Openexcavationin All Soils And Sub Soils To Full Depth As May Be Directed Except In Hard Rock Requiring Blasting Inclusive Of Shoring Shuttering, Baling Out Water Wherever Necessary Refilling The Foundation With Excavated Earth Other Than Sandy Soil In Layers Of Not More Than 15 Cm Thick Layers Well Rammed And Depositing The Surplus Earth Within Compound In Places Shown By The Departmental Officers With An Initial Lead Of 10 Metre And Initial Lift Of2 Metre And Clearing And Leveling The Site Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. 3 Supplying And Filling In Foundation And Basement With Filling M-Sand In Layers Of Not More Than 15Cm Thick Well Rammed Watered And Consolidated Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. 4 Refilling With Excavated Earth Other Than Sand With An Initial Head Load Of 100 Mts. And Depositing The Earth As Shown By The Departmental Officersin Layers Of Not More Than 15 Cm Thick Well Rammed, Watered And Consolidated Etc. Complete Complying With Standard Specification 5 Supplying And Filling Of Gravel In Basement Filling Including Conveyance Loading And Unloading Charges And All Other Incidential Charges Filling Laying Watering And Consolidation Etc., Complete As Directed By The Dept., Officers With Standard Specification. 6 Supplyingandfilling 40Mm Iss Metal In Dispersion Trench Around The Stoneware Pipe Or In The Leach Pit Or Soak Pit To The Required Thickness As Directed By The Departmental Officers Etc., Complete ( The Rate Including Cost Of Metal Filling Etc., Complete Complying With Standard Specification. 7 Supplyingandfilling 20Mm Iss Metal In Dispersion Trench Around The Stoneware Pipe Or In The Leach Pit Or Soak Pit To The Required Thickness As Directed By The Departmental Officers Etc., Complete ( The Rate Including Cost Of Metal Filling Etc., Complete Complying With Standard Specification. 8 Plain Cement Concrete 1:4:8 ( One Part Of Cement, Four Part Of Crushed Stone Sand ( M- Sand ) And Eight Part Of Coarse Aggregates ) Using 40Mm Size Iss Hbg Metal Including Cost And Conveyance Of All Materials To Site And Including For The Mixing, Laying And Labour Charges And All Incidential Charges Such As Water Providing Etc., Complete As Per Standard Specification 9 Providing And Laying In Position, Standardised Concrete Mix M-20 Grade In Accordance Usingwith Is:456-2000, 20Mm And Down Graded Hard Broken Granite Stone Jelly For All Rcc Items Of Works With Minimum Cement Content Of 325 Kg / M3 And Maximum Water Cement Ratio Of 0.55, Including Admixture ( Plasticiser / Super Plasticiser ) In Recommended Proportions As Per Is:9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability With About ( 5Cu.M. ) 7730 Kg. Of 20Mm Machine Crushed Stone Jelly And With About ( 3.3 Cu.M. ) 5156 Kg. Of 10-12Mm Machine Crushed Stone Jelly And With About ( 4.79 Cu.M. ) 7670 Kg. Of Sand, But Excluding Cost Of Reinforcement Grill And Fabricating Charges, Centering And Shuttering And Also Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing, Etc. And Providing Fixtures Like Fan Clamps In The Rcc Floor / Roof Slabs Wherever Necessary Without Claiming Extra, Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. The Coarse And Fine Aggregates To Be Used Should Comply With The Requirements Of Is Standards. ( No Separate Payment Will Be Made By The Department For The Excess Usage Of Materials ) .Foundation & Basement 10 Superstructure In Ground Floor 11 Supplying, Fabricating And Placing In Position Of Steel Reinforcement Using Ms ( Or ) Rts Rods For All Rcc Item Of Works Including Cost Of Steel And Binding Wire In All Floorsetc., Complete Complying With Standard Specificationand As Directed By The Departmental Officers. 12 Supplying And Erecting Steel Centering Including Necessary Supports For Plane Surfaces, In Foundation And Basement For All Rcc Works Such As Column Footing, Plinth Beam, Grade Beam Staircase Step, Bedblock Etc., Which Requires Only Normal Strutting Using Ms Sheets Of Size90cmx60cm Of Bg 10 Stiffened With Mild Steel Angles Of Size 25Mmx 25Mmx3mm Laid Over Silver Oak ( Country Wood ) Joists Of Size 10Cmx6.5Cm Spaced At About 90Cm C / C And Supported By Casurina Props Of 10Cm To 13Cm Dia. ( Spaced At 75Cm C / C ) Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. ( The Centering Will Be Removed After Specified Period Of Concrete Without Damaging The Concrete ) 13 Supplying And Erecting Centering For Sides And Soffits Including Necessary Supports And Strutting Up To 3.29 M Height For Plane Surfaces As Detailed Below In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60 Cm And 10 Bg Stiffened With Welded Mild Steel Angle Of Size 25Mm X 25Mm X 3 Mm For Boarding Laid Over Silver Oak Joists Of Size 10Cm X 6.50 Cm Spaced At Above 90 Cm Centre To Centre And Supported By Casurina Props Of 10Cm To 13 Cm Dia Spaced At Not More Than 75 Cm Centre To Centre Etc. Complete Complying With The Standard Specification. ( Payment For Centering Shall Be Given After The Concrete Is Laid ) -For Plane Surface 14 For Plane Surface Such As Rcc Square Or Rectangular Column, Top And Bottom Slab Of Sunshade, Boxing, Sill Slab Etc., 15 Brick Work In Cm 1:5 ( One Cement & Five Crushed Stone Sand ( M- Sand ) ) Using Ii Class Ground Moulded Bricks Of Size 9 X 43 / 8X 2 3 / 4 Including Finishing, Curing, Etc., Complete Complying With Standard Specification - 100Cft-In Foundation & Basement 16 In Superstructure In Ground Floor 17 Brick Work In Cement Mortar 1:3 ( One Cement And Three M-Sand ) Using Iind Class Ground Moulded Chamber Burnt Bricks9X43 / 8X2 3 / 4 And Finishing Neatly Curing Etc., Complete Complying With Standard Specificationsand As Directed By The Department Officers. ( Masonry Projections Wherever Necessary For Obtaining Required Elevation Shall Be Done Without Extra Cost ) -Foundation & Basement 18 Brick Workpartition Wall 11.10 Cm Thick Using Secondclass Ground Moulded Chamberburnt Bricks Ofsize 9X 4 3 / 8”X 2 3 / 4”In Cement Mortar 1:3 ( One Cement And Three Sand Including Fixing Hoop Iron Reinforcement If Found Necessary, Laying, Finishing And Curingand Including Plastering In Cm 1:5 ( One Cement And Five Sand ) 12Mm Thick On Both Sides Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers.For Superstructure In Ground Floor 19 Manufacturing, Supplying And Fixing Precast Reinforced Cement Concrete Slabs Of Following Thickness In Rcc M20 Concrete Using Following Hbgs Jelly Excluding Cost Of Reinforcement Steel In Position But Including Cost Of Moulding Charges, Casting Of Slab, Finishing, Curing And Fixing In Position In All Floors Etc., Complete Complying With Standard Specification And As Directed. 20 Special Ceiling Plastering In All Floors And Finishing The Exposed Surface Of Rcc Items Of Work Such As Slab, Beam, Sunshade, Facia, Canopy Slab, Staircase Waist Slab, Landing Slab Etc., With Cement Mortar 1:3 ( One Cement And Three M-Sand ) 10Mm Thick Including Hacking The Surfaces And Providing Cement Mortar Nosing, Beading For Sunshade, Staircase, Step, Landing Slab Etc., Including Neat Finishing And Curing Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. 21 Plastering With Cement Mortar 1:5 ( One Cement And Five M-Sand ) 12Mm Thick In All Floors Using Fine River Sand Including Neat Finishing, Curing, Etc., Complete Complying With Standard Specificationand As Directed By The Department Officers. 22 Plastering With Cement Mortar 1:3 ( One Cement And Three M-Sand ) 20Mm Thick With Wpc 2% By Weight Of Cement Used In All Floors Using Fine River Sand Including Neat Finishing, Curing, Etc., Complete Complying With Standard Specificationand As Directed By The Department Officers. 23 Painting The Walls Two Coats With Best Oil Bound Distemper Of Approved Quality ( To Be Approved By The Executive Engineer Before Use On Works ) Over One Coat Of Primer For Newly Plastered Wall Including Preparation Of Surface And Finishing Neatly Including Cost Of All Materials, Brushes, Scaffolding Charges Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. 24 Painting Two Coats Of Newly Plastered Wall Surface With Ready Mixed Exterior Emulsion Paint Of First Quality And Of Approved Colour Over A Priming Coat Including Preparing The Surface, Clean Removal Of Dirt And Including Necessary Plaster Of Paris Putty Wherever Required Etc., Complete Complying With Standard Specification. 25 Paving The Floor Withcolour Designceramictiles Of Following Design Of Approved Quality And Colour Of Size 305 X 305 X 6Mmin All Floors Over A Base Layer Of Cement Mortar 1:3 ( One Cement And Three Sand ) 20Mm Thick And Pointing With White Cement Using 0.30Kg / M2including Adding Suitable Colour Pigments To Suit The Colour Of Tiles Finishing Perfectly And Curing Etc., Including Cost Of Tiles, All Materials And Incidential Charges, Transportation Charges And Labour Charges For Laying Tiles Etc., Complete Complying With Standard Specification Andas Directed By The Departmental Officers . ( The Tiles Should Be Got Approved By The Departmental Officers Before Use On Works ) . 26 Dadooing The Walls With Colour Design Glazedtiles Of Size 300Mmx200mmx6mm Of Approved Quality In All Floors Set In Cement Mortar 1:2 Mix ( One Cement & Two Sand ) 10Mm Thick And Pointing With White Cement Using 0.4 Kg / M2 Including Adding Suitable Colour Pigments To Suit The Colour Of Tiles Including Finishing The Joints Neatlyand Curing Etc., Completecomplying With Standard Specifications. ( The Tiles Should Be Got Approved By Departmental Officers Before Use On The Work ) . 27 Supply And Fixing Of Steel Doors With Single Leaf With Following Specification. Ms Angles Of Size 40X40x 6Mm At 3.5 Kg / M Used For The Outer Frame And Ms Angles Of Size 35X35x5mm At 2.60 Kg / M For The Shutter Frames. Stiffners With 32X6mm At 1.50 Kg / M. Ms Flat Is Provided As The Lock Rail Of The Door And Welded Infact Of Both Ends To The Shutter Frame, 18 Gauge Cr Sheets Of Best Quality Is Laid As Panel In The Shutter Frames. 18X5mm At 0.70 Kg / M Ms Flat Is Welded Over The 32X6mm At 1.50 Kg / Rm And Ms Flaton The Rear Side Of The Door Sandwitching The Cr Sheet For Rigidity With Locking Rail And Bottom Tie Arrangements. Additional Stiffners With 18X5 Mm At 0.7 Kg / M Ms Flats Are Provided Horizontally Diagonally On The Rear Side Of The Shutter. 2Nos Of Hinges In Case Of Single Leaf And 4Nos Of Hinges In Case Double Leaf Shutter Is Provided 6 Nos Of Hold Fasts 200 Length 40X40x6mm M.S. Angle Spliced At The Ends Are Welded To The Outer Frame Of The Door. 28 Supplying And Fixing In Position Of Solid Panel Pvc Door With Pvc Frame. Solid Pvc Door Shutter Using 19 Gauge 19Mm Ms Square Tubes For Styles And Outer Frame. 15Mm Ms Square Tubes For Tops, Lock And Bottom Rails, The Steel Tubes Shall Be Covered With 5Mm Thick Solid Pvc Sheets. Shutter Using 5Mm Thick Solid Pvc Sheets For Panelling Shall Rigidly Fixed In Position Including Necessary Furniture And Fittings. The Over All Size Of Styles Shall Be 50Mmx30mm. The Over All Size Of Top Rail, Lock Rail And Bottom Rail Shall Be 75Mmx30mm. The Over All Size Of Frames Shall Be 50Mmx45mm With Suitable Rabate For Housing The Shutter. 29 Supplying And Fixing In Position Of Solid Panel Pvc Door With Sliding Aluminium Frame. The Outer Frame Will Be 62X38x2mm @ 1.17 Kg / M And 40X20x2mm Aluminium C Section. Soild Pvc Door Shutter Using 16 Gauge 19Mm Ms Sq. Tubes For Styles And Outer Frames. 15Mm Ms. Sq. Tubes For Top Lock And Bottom Rails. The Steel Tubes Shall Be Covered With 5Mm Thick Solid Pvc Sheets. Shutter Using 5Mm Thick Solid Pvc Sheets For Paneling Shall Rigidly Fixed In Position Including Necessary Furniture Fittings. The Overall Size Of Styles Shall Be 50Mmx30mm. The Overall Size Of Top Rail, Lock Rail And Bottom Rail Shall Be 75Mmx30mm, With Suitable Rebate For Housing The Shutter Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officer. 30 Manufacturing, Supplying And Fixing In Positon Of Rcc Jallyin Cement Concrete 1:2:4 Using 20Mm Machine Crushed Stone Jelly ( Excluding Cost Of Reinforcement Steel ) Including Cost Of Mould, Finishing, Curing, Lifting, Fixing In Position Etc., Complete Complying With Standard Specification And As Directed 50Mm Thick 31 Painting The New Iron Work With Two Coats Of Best Approved First Quality And Colour Of Synthetic Enamel Paint Over The Existing Red Oxide Priming Coat In All Floors Excluding Cost Of Priming Coat And Including Cost Of Painting Materials, Brushes, Putty, Preparation Of Surfaces And Scaffolding Charges Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officer. ( Thequality And Colour Of Paint Should Be Got Approved By The Departmental Officer Before Use On Work ) . 32 Manufacturing, Supplying And Fixing Of Stainless Steel Hand Rails For Staircase Using 50Mm Dia 304L Grade Stainless Steel Pipe Of 1.60Mm Thick At Required Locations To A Height Of 900Mm From Finished Floor Level Welded To 38Mm Dia Stainless Steel Pipe Post Of 1.00Mm Thick As Vertical At 900Mm Centre With 2 Nos. Of 25Mm Dia Intermediate Horizontal Stainless Steel Pipe Of 1.60Mm Thick In Between. The Vertical Pipe Has To Be Welded To The 100 X 100 X 6Mm Ms Base Plate Encased In The Base Concrete. The Rate Is Inclusive Of The Charges For Cutting, Bending, Welding, Grinding, Polishing, Conveyance, Electrical Charges, Etc. Complete 33 Supplying And Fixing In Position Indian Water Closet Oriya Type Of Size 580X440mm White Glazed Earthernware Of Approved Quality With P Trap Or S Trap Conforming To Is 2556-Part Xii With Sand Cushion And Forming Flooring Alround The Closet Using 40Mm Broken Brick Jelly In Lime Concrete 1:2:5 ( One Part Of Lime, Two Parts Of Sand And Five Parts Of Brick Jelly ) 100Mm Thick And Finishing The Top To Required Slope And Including Giving Necessary Connection To Pvc. Pipes By Dismantling Brick Masonry, Reinforced Cement Concrete Roof / Floor Slab And Making Good The Disturbed Portion To Original Condition Without Leakage Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. ( The Oriya Type Water Closet Andall Accessories Should Be Got Approved By The Departmental Officers Before Use On Work ) 34 Supplying And Fixing In Position White Glazed European Water Closet Of Best Quality And Approved Make With 100Mm P Or S Trap With Double Flapped Rigid Pvc.Seat Cover With Chromium Plate Brass Hinges, Including Supplying And Fixing Pvc. Low Level Flushing Tank 10 Litre Capacity Of Approved Quality On Wall With Teak Wood Plugs, Brass Screws And 2 Numbers 15Mm Dia Gun Metal Wheel Valve, 15Mm Dia Nylon Connection And Giving Necessary Water Supply Connection As Directed By The Departmental Officers. The Rate Includes Cost Of 100Mm Dia Pvc.Pipe 60Cm Long Including Cost Of 3 Kg.Of White Cement 6Kg.Of Cement, Spunyarn, Shellac, Thread Ball, Teak Wood Plugs, Brass Screws 75Mmx10mmetc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. ( The European Water Closet And Flushing Tank Should Be Got Approved By The Departmental Officers Before Use On Work. ) 35 Supply& Fixing Stainless Steel Health Faucet Of Best Quality With Control Valve As Directed By The Departmental Officer. 36 Supplying And Fixing In Position Best Quality Of Approved Make White Glazed Earthernware Wash Hand Basin ( Without Pedestal ) Of Size 550X400mm With A Pair Of Cast Iron Brackets , Including Cost Of 15Mm Diametre Brass Chromium Plated Pillar Tap, 32Mm Diametre C.P.Waste, 32Mm Diametre Pvc Waste Pipe With Rubber Plug And Chain, 15Mm Diametre Gun Metal Wheel Valve, 15Mm Dia Brass Nipple, 15Mm Dia Nylon Connection Etc. Including Fixing The Wash Hand Basin In The Wall In Position With Pair Of C.I.Brackets With Teak Wood Plugs And Screws And Giving Necessary Water Supply Connection And Painting The Brackets With Two Coats Of Paint Over A Priming Coat Of Anti-Corrosive Paint Including Testing For Leakage Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. ( The Wash Hand Basin And Specials Should Be Got Approved By The Departmental Officers Before Use On Work ) 37 Supplying And Fixing In Position Indian Make Bevelled Edge Mirror Of Approved Quality And Brand Pvc / Fibre Glass Framed 600 X 450 X 5.5Mm Thick Mirror, Shelf Type With Hard Board Backing Of Approved Colour Fixed With Brass Screws, Rawl Plug, Etc., Complete Complying With Standard Specification. ( The Mirror Should Be Got Approved By The Executive Engineer Before Use On Woks ) 38 Supplying And Fixing Approved Best Quality Brass Cp Towel Rail 600Mm Long And 20Mm Dia With Brackets Of Same Materials Including Cost Of Teak Wood Plugs And Cp Screws, Etc., Complete Complying With Standard Specifications. ( The Towel Rail Should Be Got Approved By Executive Engineer Before Use On Works ) . 39 Supplying Andfixing New One Of Best Approved Quality Chromium Plated Soap Tray Of Size 150X150mm Of Approved Quality And Brand Including Cost Of Rawel Plug, Brass Screws Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. ( The Materials Should Be Got Approved By The Executive Engineer Before Use On Works ) . 40 Supplying And Fixing Position P.V.C Nahani Trap Of The Following Sizes With Best Stainless Steel Gratings Of Approved Brand And Quality, Fixed Over A Bed Of Brick Jelly Lime Concrete 1:2:5 ( One Part Of Lime, Two Part Of Sand And Five Part Of 40Mm Gauge Brick Jelly ) And Finished With Cement Mortar 1:3 ( One Cement, Three Sand ) Including Dismantling Masonry Works Wherever Found Necessary And Making Good The Dismantled Portions To The Original Condition And Giving Connection To The Ci / Pvc Pipes, Etc., Complete Complying With Standard Specification. ( The Nahani Trap Should Be Got Approved By The Executive Engineer Before Use On Works ) 41 Supplying And Fixing Best Variety And Approved Quality Of Pvc Ventilating Shaft Of 110Mm Dia And 3M Height Including Cost Of 100Mm Dia.Pvc Cylindrical Cowl Type And Fixing In Position As Directed By The Departmental Officers Complete Complying With Standard Specification. ( The Pvc Pipe And Cowl Should Be Got Approved From The Executive Engineer Before Use On Work ) 42 Supply And Delivery And Fixing Of Hdpe Tankas Per Is 12701 / 1996 Including Loading, Unloading, Transportation And Labourcharges For Fixing Of The Gi Pipes Andspecials For Pipe Connection Works Includingcutting, Threading And Fixing Charges Etc., . ( The Pvc Water Tank Should Be Got Approved By The Executive Engineer Before Use On Works ) . 2000 Litre Capacity. 43 Supplying And Fixing In Position First Quality And Approved Variety Of Gun Metal Gate Valve With Bis Make Of The Following Dia Including Cost Of Shellac, Thread Balls, Etc., Complete Complying With Standard Specifications ( For Both Internal And External Water Supply Arrangements ) .The Valves To Be Used On Work Shall Be Got Approved By The Executive Engineer Before Use On Work-50Mm Gate Valve 44 40Mm Gate Valve 45 Supplying & Fixing Inposition 15Mm Dia Chromium Plated Brass Screw Down Tap ( Heavy Type ) Of Approved Make Confirming To Iss And Including Cost Of Shellac, Thread Etc., Complying With Standard Specification And Including Cutting And Threading Wherever Necessary ( Tapsshould Be Got Approved By The Departmental Officers Before Use On Works ] 46 Supplying, Laying And Joining Upvc ( Designedto Handle Higher Pressure ) Pipes Of Approved Quality And Best Veriety Conforming To Iss With Isi Mark, Of The The Following Size Above Ground Level Up To 4 M Hight Laid Properly To Alignment Including Cutting, Threading And Fixing The Required Upvc Specials But Excluding The Cost Of Such Specials And Fixing To The Wall With Necessary Tw Plugs, Clamps And Screws, Making Holes On The Wall Or Drilling Holes In The Roof And Making Good Dismantled Portion To Original Condition With Necessary Brick Work, Concrete And Plasteringwherever Necessary With Necessary Scaffolding Charges Etc., Complete.25Mm Dia Pipe 47 32Mm Dia Pipe 48 40Mm Dia Pipe 49 Supplying, Laying And Joining Upvc Pipes ( Handle Higher Pressure ) Of Approved Quality And Best Veriety Conforming To Iss With Isi Mark, Of The The Following Size Below Ground Level Laid Properly To Alignment Including Cutting, Threading And Fixing The Required Pvc Specials But Excluding The Cost Of Such Specials Etc., Complete.32 Mm Dia Pipe 50 Supplying And Fixing In Position Of The Following Upvc Specials Best Approved Quality Conforming To Iss And Providing Leak Proof Joints With Upvc Adhesive Etc., Including Fixing To Walls With Necessary Teak Wood Plugs Screws Etc., And Giving Connections To The Upvc Pipe Dismantling The Brick Masonry Rcc Floor Or Roof Slab And Redoing The Disturbed Portion To Original Conditions Etc., Complete Complying With Standard Specifications. -The Upvc Specials Should Be Got Approved From The Executive Engineer Before Use On Works -50Mm Coupling 51 50Mm Bend 52 50Mm Elbow 53 40Mm Tee 54 40Mm Elbow 55 40X32mm Reducer 56 32X25mm Reducer Elbow 57 25X20mm Reducer Tee 58 Supplying And Fixing In Position Best Quality Pvc Soil / Waste Pipes ( 6 Kg / Cm2 ) Of Various Size Having Isi Mark And Providing Leak Proof Joints Including Fixing To The Wall With Special Pvc / Ms Clamps, Etc., And Making Connection To All Sanitory Fittings, Dismantling Masontry Etc., Complete Complying With Standard Specification. ( Below Ground Level ) -75 Mm Dia Pvc Soil Pipe 59 110Mm Dia Pvc Soil Pipe 60 Supplying And Fixing In Position Pvc Specials Of The Following Dia And Types Of Approved Quality Confirming To Bis And Providing Leak Proof Joints Including Fixing To The Walls And Giving Connection To The Pvc Soil Stacks, Dismantling The Masonry Or Rcc Works And Re-Doing The Dismantled Portion To Original Condition Etc., Complete Complying With Standard Specifications. ( The Pvc Specials Should Be Got Approved By The Executive Engineer Before Use On Works ) .75Mm Dia Pvc Door Elbow 61 75Mm Dia Pvc Plain Elbow 62 75Mm Dia Pvc Tee 63 110Mm Dia Pvc Door Elbow 64 110Mm Dia Pvc Plain Elbow 65 Supplying, Laying And Joining Upvc Pipes ( Handle Higher Pressure ) Of Approved Quality And Best Veriety Conforming To Iss With Isi Mark, Of The The Following Size Below Ground Level Laid Properly To Alignment Including Cutting, Threading And Fixing The Required Pvc Specials But Excluding The Cost Of Such Specials Etc., Complete.32 Mm Dia 66 Supplying And Fixing In Position Of The Following Upvc Specials Best Approved Quality Conforming To Iss And Providing Leak Proof Joints With Pvc Adhesive Etc., Including Fixing To Walls With Necessary Teak Wood Plugs Screws Etc., And Giving Connections To The Upvc Pipe Dismantling The Brick Masonry Rcc Floor Or Roof Slab And Redoing The Disturbed Portion To Original Conditions Etc., Complete 32 Mm Diaupvc Coupler 67 Drilling 150Mm Dia Vertical Borewell To The Required Depth As Directed By The Departmental Officersincluding Labour Charges Inserting Pipes Assembly In The Drilled Pit Including Welding The Joints Wherever Necessary And Grouting The Casing Pipe If Necessary In Hard Rock Etc., Complete And Including Transportation Charges For The Rigs And Supporting Vehicles From One Place To Another Etc., Complete As Directed By The Executive Engineer. 68 Supply Of 160Mm Pvc Speical Casing Pipe Of Best Approved Quality Having Pressure Of 6Kg / Sq.Cm Etc., Complete As Directed By The Departmental Officers. The Pipe Should Be Got Approved By The Executive Engineer Before Use On Work. 69 Supplying And Fixing Ofm.S . Bore Well Clamp Suitable For 40 Mm Diag.I Pipe And 4 Nos Of 5 / 8 X 2 1 / 2 Bolt And Nuts. 70 Supplyinging And Fixing Of 50 Mm Dia Stainlesssteelpipe Connecter Etc., Complete As Directed By The Departmental Officers. The Pipe Should Be Got Approved By The Executive Engineer Before Use On Work. 71 Supplying And Fixing And Erecting Of 3.0 Hp Submersible Pump ( Three Phase ) Of Best Approved Quality And Make With Isi Mark Required Accessories Including Panel Board - Dol With Two Level Guard And Autostart Switch, Delta Starter, 3 Nos- Bulb And 30 Amps Switch And Wiring From Panel Board With Meter, V-Belt Service Wiring With Necessary Flexible Pipe With All Required Accessories Etc., Complete 72 Supplying And Delivery Of Nylon Rope Of 18Mm Dia For Holding The Submersible Pumpset And Hdpe Pipe Etc., Complete. 73 Supplying And Fixing Of 3 X 4 Sq.Mm Pvc Insulated And Sheated 3 Core Flat Type Copper Cable Confirming To Is 694 / 1990Etc., Complete Complying With Standard Specifications. 74 Supplying And Fixing Of Cement Based Hydraulically Pressed Anti Skidtiles ( Like Eurocon / Equivalent ) Of Size 30Cm X 30Cm And 30Cm X 15Cm For Flooring Of Approved Quality And Colour Andset In Cement Mortar 1:3 ( One Cement And Three M-Sand ) 20Mm Thick And Pointing With White Cement Using At The Rate Of 0.40Kg / M2 Including Finishing Joint With Tile Surface Etc., Complete Complying With Standard Specificaiton And As Directed By The Departmental Officers. ( The Make And Brand Of The Tiles Should Be Got Approved By Executive Engineer Before Use On Works ) 75 Supplying And Fixing In Position Of Cast Iron Man Hole Cover With Ci Frames Of Size 600X600mm Heavy Duty Of Best Approved Quality And As Per Indian Standard Specification Make Etc., Complete Complying With Standrd Specification And As Directed By The Departmental Officers. ( The Cast Iron Man Hole Cover Should Be Got Approved By The Departmental Officers Before Use On Work ) 76 Providing Granolithic Floor Finish Of The Following Thickness With Plain Cement Concrete 1:2:4 ( One Cement, Two M-Sand And Four Aggregate ) Using 25Mm Gauge Hard Broken Stone Jelly Including Laying, Finishing And The Top Rubbed Smooth With Power Trawl, Thread Lining, Curing Etc. Complete Complying With Standard Specification And As Directed By The Departmental Officers. 77 Supplying And Fixing In Position Best Approved Of Isi Quality Of 110Mm Diameters Of Pvc Rain Water Down Fall Pipes Having A Working Pressure Of 4 Kg / Sq.Cm Including Cost Of Necessary Pvc Shoe, Pvc Bend, C.I. Gratings Of Required Diameter And Special Clamps, Brass Screws, Nails Etc., And Fixing Of Cast Iron Gratings At Juction Of Parapet And The Rcc Roof Slab Including Finishing, Neatly Etc., Complete. 78 Supplying And Fixing Incinerator For Ladies Bathroometc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. 79 Wiring With 2 X 1.5 Sq.Mm. ( 22 / 0.3 ) Pvc Insulated Sc Unsheathed Copper Conductor Of 1100V Grade In Suitable Pvc Rigid Pipe Concealed In Wall And Ceiling With Pvc Accessoires In Flush With Wall With 3Mm Thick Hylum Sheet Cover With Tw Switch Box And 5A Ft Switch And Making Good Of The Concealed Portion With Suitable Colour For Pvc Concealed Light / Fan Point ( For Electronic Regulator ) ( 5 Points Per Coil ) Sd 25 80 Wiring With 2 X 1.5 Sq.Mm. ( 22 / 0.3 ) Pvc Insulated Sc Unsheathed Copper Conductor Of 1100V Grade In Suitable Pvc Rigid Pipe Concealed In Wall And Ceiling With Pvc Accessories In Flush With Wall With 150Mm X 100Mm X 113Mm Tw Switch Box With 3Mm Thick Hylem Sheet Cover For 5A 3 Pin Non Inter Locking Wall Socket With 5A Flush Type Switch With Continuous Earth Wire Connection Of 14 Swg Tc Wire And Making Good Of The Concealed Portion With Suitable Colour For Concealed Pvc Plug Point Sd 38 81 Supply And Run Of 2 Of 1.5 Sq.Mm. ( 22 / 0.3 ) Pvc Insulated Sc Unsheathed Copper Conductor Of 1100V Grade In Rigid Pipe Concealed In Wall And Ceiling With Continuous Earth Wire Connection Of 14 Swg Tc Wire And Making Good Of The Concealed Portion With Suitable Colour Sd 55 82 Supply And Fixing Of Single Box Type 440W Fitting Complete With Copper Choke And Condenser With Round Blocks On Wall Or Ceiling With Flu Tube With Pvc Unsheathed Copper Leads From Terminals To The Fitting Etc, Complete As Per Standards - Sd 89 Pwd Electrical Data 83 Supply And Fixing Of 1200Mm ( 48 ) Ac Ceiling Fan Complete With Stepped Electronic 300W Regulator With 1 Meter Down Rod On The Existing Clamp Sd 107 Pwd Electrical Data 84 Earting As Per Pwd Standards With An Earth Electrode Of 2Mts Class B Gi Pipe Of Dia 32Mm Complete With Necessary Masonry Works Sd 234 Pwd Electrical Data 85 Supply And Fixing Of 3 Phase 4 Wire 4 Way Icdb Of 32A Per Way With 100A Tpnmc Switch With Suitable Trunking Box Ms Cable Entry Boxes And Internal Connection On Suitable Angle Iron Frame Work With Earth Connection - Sd 178 Pwd Electrical Data 86 Supply And Fixng Of Tneb Meter Board Suitable For 3 Phase 63A Service Connection Made Up Of Suitable Angle Iron Frame Work Of Size 2 Feet X 1-1 / 2 Feet Using Angle Iron Of Size 1-1 / 2 X 1-1 / 2 X 1 / 4 Rigidly Fixed On Wall Covered With Hylem Sheet Of Size 2 Feet X 1 / 2 Feet Of 6Mm Thickness With Necessary Bolts And Nuts Supports And Supply And Fixing Of 3 Nos. 63A Fuse Units ( 500V ) , 1 No. Neutral Link, Copper Earth Flat Of Size 1 X 1 / 4 With Inter Connection Of Eb Meter To Fuse Units By 16 Sq.Mm Pvc Insulated Copper Wire With Earth Connection Complete - Sd 129 Pwd Electrical Data 87 Supply And Fixing Of 440W Twin Street Light Fluorescent Fitting Complete With Copper Choke And Condensor With 19Mm Dia Gi Pipe ( Class B ) With 1 No. 19Mm Gi Bend Complete On The Existing Post / Wall With 16A Aerial Fuse Unit On Ms Plate With Pvc Unsheathed Copper Leads With Ms Clarnps And Aluminium Painting With Fluorescent Tubes -Sd 94 Pwd Electrical Data 88 Supply And Run Of 2 Of 2.5 Sq.Mm ( 36 / 0.3 ) Pvc Insulated Sc Unsheathed Copper Conductor Of 1100 V Grade On 7 / 20 Gi Wire For Service Connection Mains Sd 449 89 Supply And Delivery 32Mm Gi Service Pipe Including Cost And Conveyance Of All Materials To Site And Labour Charges Etc, Complete Complying With Standard Specification 90 Provision For G.S.T 18%
