Tender For Street Scaping Work Around Yashobhoomi At Sector-25, Dwarka. Sh:-Providing, Supplying And Installing Nandi Sculpture.; 1 Providing, Supplying And Installationhand Crafted Bhainslana Stone “Nandi” Statue / Sculpture Using Traditional Technic And Modern Tools Having Size Of Finishedstatue 18 Feet * 11 Feet * 5.5 Feet ( Including 2 Feet High Monolithic Pedestal Of Same Stone ) Including Fine Polished With Adequate Grinder Tools ( Manual / Machine ) . The Design Ofstatue And Quality Of Material As Mentioned In Indicative Image At Page No.161 Of Nit, All Complete As Approved By Engineer- In- Charge.Note :1. Agency Shall Be Held Responsible And No Payment Shall Be Made , If Any Mishandling Occurs During The Transportation , Hoisting , During Fixing & Installation Of Statue Or Any Damage Found In Statue At Any Stage.2. The Quoted Rate Shall Includes The Cost Of Polishing , Transportation To The Designated Site , Fixing & Installation Of Statue, All Complete As Per Direction Of Engineer In-Charge.3. The Sculpture Should Be Fine Polished With Adequate Grinding Tools ( Manual / Machine ) Only Till Appearance Of Natural Grains Of Stone And No Spray Painting Is Allowed.4. The Payment Shall Be Made After Thehoisting , Installation &Fixing Of Complete Flawless Statue As Direction Of Engineer In-Charge.5. A Statue Is A Free-Standing Sculpture In Which The Realistic, Full-Length Figures Of “Nandi” Are Carved Or Cast In A Durable Material Hand Crafted Bhainslana Stone Of Mentioned Size. 2 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means Over Areas ( Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan ) Including Getting Out And Disposal Of Excavated Earth Lead Up To 50 M And Lift Up To 1.5 M, As Directed By Engineer-Inchargeall Kinds Of Soil. 3 Providing And Laying In Position Ready Mixed Plain Cement Concrete, Using Fly Ash And Cement Content As Per Approved Design Mix And Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For All Leads, Having Continuous Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Plain Cement Concrete Work, Including Pumping Of R.M.C. From Transit Mixer To Site Of Laying And Curing, Excluding The Cost Of Centering, Shuttering And Finishing, Including Cost Of Curing, Admixtures In Recommended Proportions As Per Is : 9103 To Accelerate / Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of The Engineer-In-Charge.Note : ( 1 ) Fly Ash Conforming To Grade I Of Is 3812 ( Part-1 ) Only Be Used As Part Replacement Of Opc As Per Is : 456. Uniform Blending With Cement Is To Be Ensured In Accordance With Clauses 5.2 And 5.2.1 Of Is: 456 -2000 In The Items Of Bmc And Rmc. ( 2 ) M-10 Grade Plain Cement Concrete ( Cement Content Considered @ 220 Kg / Cum Cement Use More Than The Required Minimum Cement Content Nothing Shall Be Payable Whereas Recovery Shall Be Affected For Less Cement Used Than The Minimum Quantity For M-10 ) All Works Up To Plinth Level: 4 Providing And Laying In Position Ready Mixed M-25 Grade Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For All Leads, Having Continuous Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work, Including Pumping Of R.M.C. From Transit Mixer To Site Of Laying , Excluding The Cost Of Centering, Shuttering Finishing And Reinforcement, Including Cost Of Admixtures In Recommended Proportions As Per Is : 9103 To Accelerate / Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of The Engineer-In-Charge. ( Cement Content Considered @ 330 Kg / Cum Cement Use More Than The Required Minimum Cement Content Nothing Shall Be Payable Whereas Recovery Shall Be Affected For Less Cement Used Than The Minimum Quantity For M-25 ) All Works Up To Plinth Level 5 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Up To Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe500d Or More 6 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For All Heights Edges Of Slabs And Breaks In Floors And Wallsabove 20 Cm Wide 7 Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Cladding Work , Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing Of Edges To Give High Gloss Finish Etc. Complete At All Levels. ( A ) Granite Stone Slab Of Colour Black, Cherry / Ruby Red ( I ) Area Of Slab Over 0.50 Sqm.
