|
| 1 | Features -- |
| 2 | Vacuum Pump-Type -Rotary Sliding Vane |
| 3 | Vacuum Pump-Cooling -Aircooled |
| 4 | Suction Hose-Dia\Length \Qty -4\"/3 mtr../6Nos |
| 5 | Sludge Suction & Drain Value -Size-4\" |
| 6 | Sludge Suction & Drain Value -Type -Knifegate |
| 7 | Hyd.Pump-Type -Not Applicable |
| 8 | Hyd.Pump-Drive -Not Applicable |
| 9 | Capacity -- |
| 10 | Tank -Volume -Water Storege Tank- 1000 Liter SludgeStorege Tank- 5000 Liter |
| 11 | Tank -Make -Jurop/Mono/Gardener DenverMistrel /Battioni or equlvalent |
| 12 | Vacuum Pump-Flow /Vacuum -500-550 Cum ./Hr./90% |
| 13 | Jetting Pump-Working Pressure-150-160 bar |
| 14 | Jetting Pump-Hose Length -100-150 m |
| 15 | Jetting Pump-Size-1\" dia |
| 16 | Jetting Pump-Water Flow for Pump of Jetting Machine-250-300 Lpm |
| 17 | Jetting Pump-Minimum Brust pressureof Jetting Hose-500-520 Bar |
| 18 | Jetting Pump-Maximum Working Pressure of Jetting Hose-200-220 Bar |
| 19 | Safety-- |
| 20 | Water Level Indicator-Type/City-Tube type /2 Nos |
| 21 | Pressure relief Valve-Size/Qty-2\"/1 Nos. |
| 22 | Vacuum relief Valve-Size/Qty-1.5\"/1 Nos |
| 23 | Mounting -- |
| 24 | Chassis -GVW-12 TON |
| 25 | Chassis -Emission Norms -As per Local RTO |
| 26 | Chassis -Chassis Engine output-Min.90 HP |
| 27 | Chassis -Driver’s Cabin Type-Single (Day) Cabin |
| 28 | Chassis -Make -Ashok Layland/ Tata/ Eicher/ Equivalent with PTO with emission norms BSVI |
| 29 | Chassis -Make/Model/wb/hp/Side PTO Provision -Any other equivalent model of other chassis manufacturers |
| 30 | Chassis -Scope -Customer |
| 31 | Chassis -Side PTO Provision -Provision required |
| 32 | Dimensions-- |
| 33 | Equipment -Equipment Length -4500-5150 mm Approx |
| 34 | Equipment -Equipment height -1500-2200 mm Approx |
| 35 | Equipment -Overall width -2000-2250 mm Approx |
| 36 | Equipment -Overall Length -3000-3500 mm Approx |
| 37 | Equipment -Equipment rear overhang -600-1600 mm Approx |
| 38 | Painting -- |
| 39 | Surface Preparation and finish -Eqiuipments Exterior -Spray-painted with two coats of superior qulity anti-corrosive primer and two costs of enamel metal paint Colour code will be as per customer / tender requirements |
| 40 | Surface Preparation and finish -Tank\"s interior -coated with 2 coats of superior quality anti-corrosive gray epoxy paint |
| 41 | For the first one year the operation and maintenance cost per Cesspool Tanker shall be the responsibility of the supplier -- |
| 42 | Cesspool Tanker |
