Supplying, Fitting And Fixing Different Types Of Furniture For The Offices Of Minority Development Board And Minority Vocational Development Boardat 4Th Floor Of Amber Building, Wbmdfc, Salt Lake, Sector-I, Kolkata-700 064. Furniture / Mdb And Mvdb- 01 Of 2023-24 Supplying, Fitting And Fixing Different Types Of Furniture For The Offices Of Minority Development Board And Minority Vocational Development Board At 4Th Floor Of Amber Building, Wbmdfc, Salt Lake, Sector-1, Kolkata-700 064 , Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Softclosing Access Flap With In-Build Power Box Are Provided On Work Surface For Wire Management. Secondary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Modesty Panel Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Understructure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedstal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. All Metal Parts Must Be Powder-Coated With Epoxy Polyester Mixture ( >40 Microns ) To Prevent Rust And Stain. All Ms Components Must Be Subject To 1000 Hours Salt Spray Test Following The 7-Tank Galvanization And Powder-Coating Process. The Product Should Be 80% Mii, And Should Have In-House Test Certificates In Addition To Greenguard ( By Ul ) , Indoor Air Quality Gold, Griha & Svagriha And Green Pro. The Oem Should Be Part Of The Bifma Compliance Programme And Should Have 10 Products Or More Registered As Bifma Compliant. ( Also Verifiable From Www.Bifma.Org ) . Manufacturer Should Have Green Guard ( By Ul ) , Green Pro, Griha, Indoor Advantage Certification Along With Products Certifications Including Aiota, Indian Design Mark, Bifma Level 2 Confoms To Ansi / Bifma E3-2014E Furniture Sustainability Standard Issued By Bifma. Other Certificates Iso 9001:2015. Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 ( Tuv-Approved / Obtained From Nabcb- Central Govt. Accredited Organization ) Are Mandatory. Manufacturer Should Have Bifma Compliant Certification For At Least 10 Of Its Products.Supplier Should Have Either Oem Or Its Dealer With 5 Years Setup Of Local Service Centre ( Valid Documentation Must Besubmitted Bv The Bidder ) . , Aristo 1800 With Eru , The Cushioned Seat Is Made Of Injection Molded Plastic Outer & Inner. Plastic Inner Is Upholstered With Leatherette And Moulded High Resilience ( Hr ) Polyurethane Foam Of Density 45±2 Kg / M3, And Hardness Load 16 ± 2 Kgf As Per Is:7888 For 25% Compression. *Seat Size : 47.0 Cm. ( W ) X 48.0 Cm. ( D ) Back Assembly: The Cushioned Back Is Made Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Leatherette. High Back Size: 47.7 Cm. ( W ) X 76.4 Cm. ( D ) The Armrest Top Is Moulded From Polyurethane ( Pu ) And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk M.S. E.R.W Tube Having Chrome Plated Finish.The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps.The Adjustable Tilting Mechanism Is Designed With The Following Features:360 Revolving Type.Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort.Tilt Tension Adjustment Can Be Operated In Seating Position.5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair.Seat / Back Tilting Ratio Of 1: 2The Mechanism Housing Is Made Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment Is Integrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Is Of 6.0±0.5 Cm. Back Frame Is Connected To The Up / Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need.The Pneumatic Ht Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm. The Pedestal Is High Pressure Die Cast Polished Aluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Is 65.0 ± 0.5Cm. Pitch-Center Dia. ( 75.0 ± 1.0Cm. With Castors ( W ) 76.1* ( D ) 76.1* ( H ) 112.7-130.2 Seatheight 43.1-53.1Cm All Metal Parts Must Be Powder-Coated With Epoxy Polyester Mixture ( >40 Microns ) To Prevent Rust And Stain. All Ms Components Must Be Subject To 1000 Hours Salt Spray Test Following The 7-Tank Galvanization And Powder-Coating Process. The Product Should Be 80% Mii, And Should Have In-House Test Certificates Along With Greenguard ( By Ul ) , Indoor Air Quality Gold, Griha & Svagriha, Bifma Level 2, Green Pro. The Oem Should Be Part Of The Bifma Compliance Programme And Should Have 10 Products Or More Registered As Bifma Compliant. ( Also Verifiable From Www.Bifma.Org ) . Manufacturer Should Have Green Guard ( By Ul ) , Green Pro, Griha, Indoor Advantage Certification Along With Products Certifications Including Aiota, Indian Design Mark, Bifma Level 2 Confoms To Ansi / Bifma E3-2014E Furniture Sustainability Standard Issued By Bifma. Other Certificates Iso 9001:2015. Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 ( Tuv-Approved / Obtained From Nabcb- Central Govt. Accredited Organization ) Are Mandatory. Manufacturer Should Have Bifma Compliant Certification For At Least 10 Of Its Products.Supplier Should Have Either Oem Or Its Dealer With 5 Years Setup Of Local Service Centre ( Valid Documentation Must Besubmitted Bv The Bidder ) . , 1.Seat Assembly: The Seat Assembly Should Bemade Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood, Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. Seat Size: 47.0 Cm. ( W ) X 48.0 Cm. ( D ) 2.Back Assembly: The Back Asembly. Should Bemade Of Powder Coated ( Oft 40-60 Microns ) Tubular Frame Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Should Beupholstered Using Double Layer Spacer Mesh Fabric With High Tenacity Yarn. Back Size : 46.5 Cm. ( W ) X 60.5Cm. ( H ) 3.High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density =45+ / -2 Kg / M3 And Hardness Load 16 ± 2 Kgffor 25% Compression. 4.Armrests: The One-Piece Armrests Should Beinjection Moulded From Black Co-Polymer Polypropylene. . 5.Tubular Frame: The Powder Coated ( Dft 40-60.Microns ) Tubular Frame Should Becantilever Type & Made Of Ø2.54 ±0.03Cm. X 0.2 ±0.016Cm Thick M.S.E.R.W. Tube. All Metal Parts Must Be Powder-Coated With Epoxy Polyester Mixture ( >40 Microns ) To Prevent Rust And Stain. All Ms Components Must Be Subject To 1000 Hours Salt Spray Test Following The 7-Tank Galvanization And Powder-Coating Process. The Product Should Be 80% Mii, And Should Have In-House Test Certificates Along With Indoor Air Quality Gold ( By Scs Global ) , Griha & Svagriha & Green Pro. The Oem Should Be Part Of The Bifma Compliance Programme And Should Have 10 Products Or More Registered As Bifma Compliant. ( Also Verifiable From Www.Bifma.Org ) . Manufacturer Should Have Green Guard ( By Ul ) , Green Pro, Griha, Indoor Advantage Certification Along With Products Certifications Including Aiota, Indian Design Mark, Bifma Level 2 Confoms To Ansi / Bifma E3-2014E Furniture Sustainability Standard Issued By Bifma. Other Certificates Iso 9001:2015. Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 ( Tuv-Approved / Obtained From Nabcb- Central Govt. Accredited Organization ) Are Mandatory. Manufacturer Should Have Bifma Compliant Certification For At Least 10 Of Its Products.Supplier Should Have Either Oem Or Its Dealer With 5 Years Setup Of Local Service Centre ( Valid Documentation Must Besubmitted Bv The Bidder ) . , Providing, Supplying And Placing Of Two Seater Sofa .Overall Size :Width: 151Cm Depth : 86Cm Height : 77Cmseating Height : 39Cmframe Material : Tropical Solid Wood , Seat Foam : Polyurethane Foam With Recron Layer. Foam Density : 18 Kg / Cubic Cm. Back Foam : Polyurethane Foam With Silicon Fill At Arms. Foam Density : 22 Kg / Cubic Cm All Metal Parts Must Be Powder-Coated With Epoxy Polyester Mixture ( >40 Microns ) To Prevent Rust And Stain. All Ms Components Must Be Subject To 1000 Hours Salt Spray Test Following The 7-Tank Galvanization And Powder-Coating Process. The Product Should Be 80% Mii, And Should Have In-House Test Certificates. The Oem Should Be Part Of The Bifma Compliance Programme And Should Have 10 Products Or More Registered As Bifma Compliant. ( Also Verifiable From Www.Bifma.Org ) . Manufacturer Should Have Green Guard ( By Ul ) , Green Pro, Griha, Indoor Advantage Certification Along With Products Certifications Including Aiota, Indian Design Mark, Bifma Level 2 Confoms To Ansi / Bifma E3-2014E Furniture Sustainability Standard Issued By Bifma. Other Certificates Iso 9001:2015. Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 ( Tuv-Approved / Obtained From Nabcb- Central Govt. Accredited Organization ) Are Mandatory. Manufacturer Should Have Bifma Compliant Certification For At Least 10 Of Its Products.Supplier Should Have Either Oem Or Its Dealer With 5 Years Setup Of Local Service Centre ( Valid Documentation Must Besubmitted Bv The Bidder ) . , It Should Be12 ±0.3 Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade For Fixing With Understructure.It Should Bea Welded Assembly Made In Ss202 Grade Having Dia. 12±0.04 As Per Should Be :1762. All Metal Parts Must Be Powder-Coated With Epoxy Polyester Mixture ( >40 Microns ) To Prevent Rust And Stain. All Ms Components Must Be Subject To 1000 Hours Salt Spray Test Following The 7-Tank Galvanization And Powder-Coating Process. The Product Should Be 80% Mii, And Should Have In-House Test Certificates. The Oem Should Be Part Of The Bifma Compliance Programme And Should Have 10 Products Or More Registered As Bifma Compliant. ( Also Verifiable From Www.Bifma.Org ) . Manufacturer Should Have Green Guard ( By Ul ) , Green Pro, Griha, Indoor Advantage Certification Along With Products Certifications Including Aiota, Indian Design Mark, Bifma Level 2 Confoms To Ansi / Bifma E3-2014E Furniture Sustainability Standard Issued By Bifma. Other Certificates Iso 9001:2015. Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 ( Tuv-Approved / Obtained From Nabcb- Central Govt. Accredited Organization ) Are Mandatory. Manufacturer Should Have Bifma Compliant Certification For At Least 10 Of Its Products.Supplier Should Have Either Oem Or Its Dealer With 5 Years Setup Of Local Service Centre ( Valid Documentation Must Besubmitted Bv The Bidder ) . , Mayfair Main Desk Size Shall Be 1200 Width X 600 Depthx 750 Height.The Top Shall Be In White Cedar And Black And Shall Be 18 Mm Plb With Pvc Lipping.The Side Panels Shall Be 18 Mm Thickplt With Pvc .The Modesty Panel Shall Be 18 Mm Thick Plt.The Modesty Panel Shall Be In A Combination Of Black & White Cedar. All Metal Parts Must Be Powder-Coated With Epoxy Polyester Mixture ( >40 Microns ) To Prevent Rust And Stain. All Ms Components Must Be Subject To 1000 Hours Salt Spray Test Following The 7-Tank Galvanization And Powder-Coating Process. The Product Should Be 80% Mii, And Should Have In-House Test Certificates. The Oem Should Be Part Of The Bifma Compliance Programme And Should Have 10 Products Or More Registered As Bifma Compliant. ( Also Verifiable From Www.Bifma.Org ) . Manufacturer Should Have Green Guard ( By Ul ) , Green Pro, Griha, Indoor Advantage Certification Along With Products Certifications Including Aiota, Indian Design Mark, Bifma Level 2 Confoms To Ansi / Bifma E3-2014E Furniture Sustainability Standard Issued By Bifma. Other Certificates Iso 9001:2015. Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 ( Tuv-Approved / Obtained From Nabcb- Central Govt. Accredited Organization ) Are Mandatory. Manufacturer Should Have Bifma Compliant Certification For At Least 10 Of Its Products.Supplier Should Have Either Oem Or Its Dealer With 5 Years Setup Of Local Service Centre ( Valid Documentation Must Besubmitted Bv The Bidder ) . , 1.Seat Assembly: The Seat Assembly Should Bemade Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood, Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. Seat Size: 47.0 Cm. ( W ) X 48.0 Cm. ( D ) 2.Back Assembly: The Back Asembly. Should Bemade Of Powder Coated ( Oft 40-60 Microns ) Tubular Frame Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Should Beupholstered Using Double Layer Spacer Mesh Fabric With High Tenacity Yarn. Back Size : 46.5 Cm ( W ) X 70.5 Cm ( H ) 3.High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density =45+ / -2 Kg / M3 And Hardness Load 16 ± 2 Kgffor 25% Compression. 4.Armrests: The One-Piece Armrests Should Beinjection Moulded From Black Co-Polymer Polypropylene. 5.Centre-Tilt Mechanism: The Mechashould Be M Should Bedesigned With The Following Features: • 360° Revolving Type. • 17° ±2° Maximum Tilt On Pivot At Centre • Upright Position Locking. Tilt Tension Adjustment.. 6.Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 11.0 ±0.3Cm. 7.Telescopic Bellow Assy: The Bellow Should Be3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. 8.Pedestal Assembly: The Pedestal Should Beinjection Moulded In Black 33% Glass-Filled Nylon66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be66.3 ±0.5Cm. Pitch-Center Dia. ( 76.3 ±1.0Cm With Castors. ) 9. Twin Wheel Castors: The Twin Wheel Castors Should Beinjection Moulded In Black Nylon All Metal Parts Must Be Powder-Coated With Epoxy Polyester Mixture ( >40 Microns ) To Prevent Rust And Stain. All Ms Components Must Be Subject To 1000 Hours Salt Spray Test Following The 7-Tank Galvanization And Powder-Coating Process. The Product Should Be 80% Mii, And Should Have In-House Test Certificates Along With Indoor Air Quality Gold ( By Scs Global ) , Griha & Svagriha & Green Pro. The Oem Should Be Part Of The Bifma Compliance Programme And Should Have 10 Products Or More Registered As Bifma Compliant. ( Also Verifiable From Www.Bifma.Org ) . Manufacturer Should Have Green Guard ( By Ul ) , Green Pro, Griha, Indoor Advantage Certification Along With Products Certifications Including Aiota, Indian Design Mark, Bifma Level 2 Confoms To Ansi / Bifma E3-2014E Furniture Sustainability Standard Issued By Bifma. Other Certificates Iso 9001:2015. Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 ( Tuv-Approved / Obtained From Nabcb- Central Govt. Accredited Organization ) Are Mandatory. Manufacturer Should Have Bifma Compliant Certification For At Least 10 Of Its Products.Supplier Should Have Either Oem Or Its Dealer With 5 Years Setup Of Local Service Centre ( Valid Documentation Must Besubmitted Bv The Bidder ) . , 1.Seat Assembly: The Seat Assembly Should Bemade Up Of 1.2 ±0.1Cm. Thick Hot-Pressed Plywood, Upholstered With Fabric Upholstery Covers And Moulded Polyurethane Foam. Seat Size: 47.0 Cm. ( W ) X 48.0 Cm. ( D ) 2.Back Assembly: The Back Asembly. Should Bemade Of Powder Coated ( Oft 40-60 Microns ) Tubular Frame Of 0 2.54 ±0.03Cm. X 0.2 ±0.016Cm.Thk. Ms Erw Tube Designed With Contoured Lumbar Support For Extra Comfort. The Back Should Beupholstered Using Double Layer Spacer Mesh Fabric With High Tenacity Yarn. Back Size : 46.5 Cm ( W ) X 70.5 Cm ( H ) 3.High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density =45+ / -2 Kg / M3 And Hardness Load 16 ± 2 Kgffor 25% Compression. 4.Armrests: The One-Piece Armrests Should Beinjection Moulded From Black Co-Polymer Polypropylene. 5.Centre-Tilt Mechanism: The Mechashould Be M Should Bedesigned With The Following Features: • 360° Revolving Type. • 17° ±2° Maximum Tilt On Pivot At Centre • Upright Position Locking. Tilt Tension Adjustment.. 6.Pneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 11.0 ±0.3Cm. 7.Telescopic Bellow Assy: The Bellow Should Be3 Piece Telescopic Type And Injection Moulded In Black Polypropylene. 8.Pedestal Assembly: The Pedestal Should Beinjection Moulded In Black 33% Glass-Filled Nylon66 And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be66.3 ±0.5Cm. Pitch-Center Dia. ( 76.3 ±1.0Cm With Castors. ) 9. Twin Wheel Castors: The Twin Wheel Castors Should Beinjection Moulded In Black Nylon All Metal Parts Must Be Powder-Coated With Epoxy Polyester Mixture ( >40 Microns ) To Prevent Rust And Stain. All Ms Components Must Be Subject To 1000 Hours Salt Spray Test Following The 7-Tank Galvanization And Powder-Coating Process. The Product Should Be 80% Mii, And Should Have In-House Test Certificates Along With Indoor Air Quality Gold ( By Scs Global ) , Griha & Svagriha & Green Pro. The Oem Should Be Part Of The Bifma Compliance Programme And Should Have 10 Products Or More Registered As Bifma Compliant. ( Also Verifiable From Www.Bifma.Org ) . Manufacturer Should Have Green Guard ( By Ul ) , Green Pro, Griha, Indoor Advantage Certification Along With Products Certifications Including Aiota, Indian Design Mark, Bifma Level 2 Confoms To Ansi / Bifma E3-2014E Furniture Sustainability Standard Issued By Bifma. Other Certificates Iso 9001:2015. Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 ( Tuv-Approved / Obtained From Nabcb- Central Govt. Accredited Organization ) Are Mandatory. Manufacturer Should Have Bifma Compliant Certification For At Least 10 Of Its Products.Supplier Should Have Either Oem Or Its Dealer With 5 Years Setup Of Local Service Centre ( Valid Documentation Must Besubmitted Bv The Bidder ) .
