Tender For Annual Maintenance And Repair Of Residential And Non Residential Building At Stc Bsf Tekanpur, tekanpur-Madhya Pradesh

Tender For Annual Maintenance And Repair Of Residential And Non Residential Building At Stc Bsf Tekanpur; 1 Distempering With 1St Quality Acrylic Distemper ( Ready Made ) Having Voc Content Less Than 50 Gm Per Ltr. Of Approved Manufacturer And Of Required Shade And Colour Specificationcomplete. As Per Manufacturer’S.One Or More Coats On Old Work 2 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : Old Work ( One Or More Coat Applied @ 0.90 Ltr / 10 Sqm ) . 3 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : One Or More Coats On Old Work. 4 Renewing Glass Panes, With Putty And Nails Wherever Necessary Including Racking Out The Old Putty I ) Float Glass Panes Of Nominal Thickness 4 Mm ( Weight Not Less Than 10Kg / Sqm ) 5 Providing & Fixing Fly Proof Wire Gauze To Windows, Clerestory Windows & Doors With M.S. Flat 15X3 Mm And Nuts & Bolts Completei ) Stainless Steel ( Grade 304 ) Wire Gauze Of 0.5 Mm Dia Wire And 1.4 Mm Aperture On Both Sides 6 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 7 Repairs To Plaster Of Thickness 12 Mm To 20 Mm In Patches Of Area 2.5 Sq. Meters And Under, Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete, Including Disposal Of Rubbish To The Dumping Ground , All Complete As Per Directions Of Engineer-In-Charge. With Cement Mortar 1:4 ( 1Cement: 4 Coarse Sand ) . 8 Providing And Laying Vitrified Floor Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Jointing With Grey Cement Slurry @ 3.3 Kg / Sqmincluding Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm 9 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass ( Of Approved Quality ) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 10 Providing And Fixing Brass Bib Cock Of Approved Quality : 15 Mm Nominal Bore 11 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) : For Fixed Portion.Anodised Aluminium ( Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15 ) .For Fixed Portion I ) Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) 12 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required ( Fittings Shall Be Paid For Separately ) . I ) Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) 13 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . ( Cost Of Aluminium Snap Beadingshall Be Paid In Basic Item ) :With Float Glass Panes Of 4.0 Mm Thickness ( Weight Not Less Than 10Kg / Sqm ) 14 Add Multiplying Factor 1.0633 For Incresase In Gst Rates I.E. From 12 To 18% On Dsr Items As Per Cpwd Letter No 331 Dtd 10 / 08 / 2022 15 Providing 15 To 20Mm Thick Plaster Of Paris ( Gypsum Anhydrous ) With Width Upto 50 Mminexiting Wall Or Ceiling Surface In Required Design Including Scraping , Preparing The Surface All Complete And As Per Direction Of Engineer-In-Charge. 16 Providing And Fixing 450X125x8 Mm Tempered Glass Shelf With Edges Round Off, Supported On Glass Angle Frame With Glass Brackets And Guard Rail Complete Fixed With 40 Mm Long Screws, Rawl Plugs Etc., Completeand As Per The Direction Of Enginer-In-Charge. 17 Providing And Fixing Panelling In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) :With Float Acp Sheet Of 3.5 Mm Thickness.

Refer document

INR 7988.0 /-

Refer document