Procurement Of Special Type Fasteners, Bush Bearing Assy, Key Bar, Love Joy Coupling And Other Tit-Bit Items For Regular Maintenance Of Boiler Of Both Unit 5 And 6 Under Bmd, Stps. , Bolt,Ft,Size=2 In,L=160Mm,Pitch=5.00, Ht Hex Hd, Grade 12.9 , Bolt,Ht Hex Head, M39x110 ,Thread Length 80Mm,Grade 10.9. , Bolt,Hex Hd,M36x180 Pt,Tl-100Mm,Ht 12.9 Pitch 4.0 , Screw Socket Head Cap Screw M16x50 # Grade-10.9 , Washer,Spring,M24 , Plug,Ms With Square Head Size M41x20 Mm For Bowl Mill Xrp-883 Pitch Length 11G. Additional Data: As Per Attached Drawing. , Ht Screw Cap Soc M30x230x2 Mm Ht # 155Kg Tightening Torque , Allen Head Bolt M30x3.5,L230,Pt 75Mm For Coal Mill Xrp 1003 Bowl Mill, Grade 12.9 Additional Data: Pitch 3.5 Mm. , Bolt,Special Type, M27x95 Mm,Pt,Moc:Ms For Victaulic Coupling Length 55 Mm ,Round Head Elliptic Neck Grade 10.9 Additional Data: As Per Attached Drawing. , Bolt,M36x240,Grade-12.9 For Bowl To Bowl Hub Of Bowl Mill Xrp-883 Additional Data: Part Thread. , Bolt,Tapper Stud With Nut L: 149 Mm # Tapper Stud Bolt With Nut For Pa/Fd Fan Casing Length: 149 Mm (49 Mm + 69 Mm + 31 Mm) Dia: M24 D32 Mm D29 Mm M22 With Nut M24 & M2 2 , Coupling Assy,Lovejoy Coupling,L-110 # , Coupling Assy,Lovejoy Coupling,L-150 # , Coupling Assy,Lovejoy Coupling L-075 , Coupling,Lovejoy L-095 For Elecon Make S/R , Coupling Assy,Lovejoy Coupling,L-100 # , Rubber Spider Size:L150 # Lovejoy # , Bar,Size:5X4 Mm,Moc:En-8 For Coupling/Drive Key , Bar,Size:6X5 Mm,Moc:En-8 For Coupling/Drive Key , Bar,6 Mm Square Bar , Bar,Size:8X6 Mm,Moc:En-8 For Coupling/Drive Key , Key Bar,Size:10X8 Mm,Moc:En-8 Transmission System , Bar,Size:12X10 Mm,Moc:En-8 For Coupling/Drive Key , Bar,12 Mm Square Bar,Mat- En 8 , Bar,Size:18X12 Mm,Moc:En-8 For Coupling/Drive Key , Bar,Size:22X15 Mm,Moc:En-8 For Coupling/Drive Key , Bar,Size:20X15 Mm,Moc:En-8 For Coupling/Drive Key , Bar,Size:16X10 Mm,Moc:En-6 For Coupling/Drive Key , Bar,8 Mm Square Bar # , Bar,10 Mm Square Bar , Coupling Bolt , Coupling Bolt , Bearing Assembly As Per Sketch No.-Wbpdcl/Bktpp/Bm/42# For Coal Feeder Inlet Knife Gate , Bush For Bearing Assembly # As Per Sketch No.-Wbpdcl/Bktpp/Bm/75# For Inlet Knife Gate 36In Gravimetric Coal Feede , Circlip,Internal,Size: 14X1.0 Mm Spec. Conforming To Din472 Is 3075 , Circlip,External,Size: 30X1.5 Mm Spec. Conforming To Din471 Is 3075 , Circlip,External,Size: 50X2.0 Mm Spec. Conforming To Din471 Is 3075 , Stud,M36x1100 Mm,Base Bolt,Std Thread For Pa Fan Motor Thread Length-300 Mm On Both Side,One Set Consist Of A) One No Stud(Grade-10.9 ); B) Two Nos. Matching Nut(Grade-10); C) Two Nos. , Stud,M36x1450mm Pt,Tl-300,Ht Gr-10.9 For Id Fan Base Bolt Thread On Both Side, One Set Consist Of One No Stud(Grade-10.9 ), Two No Matching Nuts (Grade-10) And Two No M36 Washers , Stud,M42x1000mm Pt,Tl-300,Ht Gr-10.9 For Pa Fan Motor Base Bolt Threadon Both Side,One Set Consist Of One No Stud(Grade-10.9 ),Two No Matching Nuts(Grade-10) And Two No M42 Washers. , Stud,M42x1100mm Pt,Tl-300,Ht Gr-10.9 For Id Fan Motor Base Bolt Thread On Both Side,One Set Consist Of One No Stud(Grade-10.9 ),Two No Matching Nuts(Grade-10) And Two No M42 Washers , Burner,Square Head Pivot Pin # # For Direct Nozzle Tilting Mechanism,U#5,6 Additional Data: With A Hole Dia:21Mm At Square Head, Material:Ss-304. , Pin, Split Pin Size:4.5X82 Mm,Moc:Ss-316 , Nipple,Hex,Cs Sa106b,1 1/2,Bs3799-1974 For Mill Xrp883 Spring Compression Sealing Hose Additional Data: As Per Attached Drawing , Nipple,Hex,Cs Sa106 Gr-B,2,Bs3799-1974 For Coal Mill Xrp-883 Trunion Shaft Sealing Hose Additional Data: As Per Attached Drawing.
