Tender For Supply For Chlorine In Aduthurai Town Panchayat, Thanjavur-Tamil Nadu

Supply For Chlorine In Aduthurai Town Panchayat , 1. Preparation Tank & Storage Tank : Type: 500 Litres;Cylindrical Vertical Flat Bottom; Size : (Id X Height X Thk)Mm Std;Lifting Hook Suitable Lifting Device Shall Be Provided On Skid; Usable Capacity : Preparatiion & Storage 525 Ltr;Liquid / Solution To Be Handled : Chlorine Designpressureatm+Full Of Liquid; Quantity : 01 Nos.2. Dosing Pump/Transfer Pump : Model : Mmdp-1;Type : Mechanical Diaphragm Type Offered Capacity 0-75 Lph, Spm/Ratio 100/15:1 ; Aphragm Ptfe Flow Control Manually; Turn Down Ration 10:1; Efficiency/Accuracy 97%/+_3% Suction Flanged Type Discharge Pressure 4.0 Kg/Cm2; Prv Set Pressure 5.0 Kg/Cm2; Connection Suction 15 Nb; Connection Discharge 15 Nb; Material Of Wetted Parts Pp ; Qty. 02 Nos [1W +1S].3. Pump Drive Motor : Type : Squirrel Cage Induction Motor Iec Xone-Ie2; Supply System :Ph, Induction, Ac, 415V= 10%, 50Hz+_5%; Mounting/Deg Protection : B 3 (Foot Mounted) / Ip 55; No Of Poles / Rpm: 4 Poles/ 1440 Rpm; Insulation Class / Temp Rise: Class F / Limited To Class B; Method Of Cooling : Tefc; Applicable Standards : Is 325; Rating : 0.5 Hp; Motor Frame Type : As Per Din / Iec 34-7; Duty Class : Si : 100% Continuouns Operation Noise Level (Less Than) : 85;Db (A) At A Distance Of 1 Mtr. 4.Motor – Pump Shaft Coupling :Type : Love Joy/Suitable Flexible Coupling; Qty : 01 Nos.5.Fitting : As Per Ansi 16.11 B;Type : 15 Nb (Sw) , 6. Flanges : As Per Ansi 16.5 B;Size : 15 Nb Swrf # 150; Material Of Construction : Pp/Upvc; Inlet Terminal Flanges / Tank;Flanges 15 Nb Swrf # 150;Outlet Terminal Flanges / Companion Flanges 15 Nb Swrf # 150;Qty At Actual.7. Pulsation Dampner : Type : Volumebottle Type; Capacity 1.5 Lit; Moc Pp/Upvc; Qty 01 Nos. 8. Pressure Gauge With Isolation Valve :Type Bourdon Sensing Type Mounting Direct Bottom;Dial Size 100 Mm; Mocss ; Accuracy 1.6%; Range 0-14 Kg/Cm2; Qty 01 No. 9. Nrv : Type Lift Check Type;End Connection 15 Nb Sw Moc Pp/Upvc;Qty 01 Nos.10. Prv : Type Spring Loaded Connection 15 Nb 300 #; Prv Set Pressure 5.0 Kg/Cm2;Moc Pp/Upvc; Qty 01 Nos.11.Strainer :Flitration Rating 40 Mesh; Size 15 Nb Moc Pp/Upvc; Qty 01 No; 12.Level Guage : Type Transparent Tubular Type; Moc Pp; End Connection 15 Nb 150 # Flanged; Qty 1 Nos. 13.Ball Valve : Type : Ball Valve For Suction & Discharge Material Of Construction : Pp/Upvc; End Connection : Sw; Size 15 Nb Sw # 150; Qty At Actual.14. Piping Within The Skid : Size / Rating Of Pipe : 15 Nb Seamless Sch40/80 Suction Moc : Pp/Upvc;Discharge Moc : Pp/Upvc. 15.Gaskets : Material Of Construction : Spiral Wound Gasket Cs Outer Inner Ss ; Qty At Actual. 16.Fastners : Make Standard Material Of Construction : Ms Galvanised; Qty At Actual. , 17.Skid / Base Frame : Base Frame A Common Base Frame For Tank, Pump And Lifting Lugs, Supports Shall Be Provided; To And Above Scope Of Supply; Stool For Pump Pump Shall Rest Not Less Then 300 Mm; Foundation Bolt M-12 X 150 Mm; Material Of Construction : Cs (Is:2062); Primer / Zomc Rich Epoxy Finish / High Built Epoxy Frame Shall Be Painted With 2 Coats Of Epoxy Primer And 2 Coats Of Epoxy Paint; Colour – Blue Std. 18.Agitator With Control Panel Set 0.5 Hp – 01 No

Refer document

INR 5000.0 /-

Refer document