Request For Quotation For Procurement Of Biosafety Cabinet, RANCHI-Jharkhand

Request For Quotation For Procurement Of Biosafety Cabinet BIOSAFETY CABINET 1.Microprocessor controlled Class II A2 Type Bio-Safety Cabinet. 2.Should be operated on 220-230V/50-60Hz. 3.The cabinet should be advanced microprocessor control, which supervises operation of all cabinet functions. 4.Temperature-compensated air velocity sensor monitors both exhaust and down flow. 24-hour clock, UV timer, 5.UV run hour meter, and blower run hour meter are standard. 6.There should be programmable PIN, which restricts unauthorized cabinet access. 7.The Biological safety cabinet should comply International Standard Certificates like NSF, ISO, JIS etc.[Model should be enlisted in NSF website] 8.The cabinet should have energy efficient DC blower motor with night set back mode facility. 9.The cabinet should have long life DUAL ULPA/HEPA Filter for supply and exhaust (per IEST-RP-CC001.3) with 99.999% efficiency for particle size 0.1 to 0.3 microns. 10.Should be raised arm rest for elevates the operators arms to prevent inflow grille blockage for safety work. 11.Work tray should be made of single piece stainless steel type 304, with 4B finish. 12.Programmable automatic UV light timer should simplify operation and extending UV light life and saving energy. 13.The Cabinet outer surface should have antimicrobial coating for minimizing contamination. 14.The controller should include soft touch keypad controls with LCD display of air flow velocity. 15.The cabinet should have built-in warm, white, electronically ballasted zero flicker and instant start 5000K lightening provides excellent illumination of the work zone. 16.The construction of cabinet should be electro galvanized steel including stand also. 17.Internal Dimension around 1220 x 580 x 660 mm(w x d x h). 18.Inflow velocity should be around 0.53m/s. 19.Instant start fluorescent lamp intensity should be around 1000 lux. 20.The sound emission should be less than 60 dBA. 21.There should be UV protected sliding front sash which can be fully opened to insert and remove large instruments. 22.RS 232 Serial interface port as standard. 23.The cabinet should have one no.UV lamp, two nos. electrical outlet sockets, universal service fixture for gas, water and antimicrobial coated SS movable stand. 24.Wheels & brakes for easy movement. 25.Minimum warranty: 01 year from installation. 26.List of installation certificate of quoted model (at least 20 nos.) in Govt. Research institutes, Universities including hospitals in JHARKHAND State. 27.At least 04 nos. factory trained engineers for smooth servicing (Certificate should attached). 28.Registered office in EASTERN part of INDIA operative for last 05 years or more. 29.Adoptable Motorized control Hot Plate with Magnetic Stirrerin biosafety cabinate floor ( 220V/50Hz) having Hot warning light with flash whenever the plate temperature is above 500C when the hotplate is turned off and unplugged from the mains.Analog precise control for heat & stirring.Top Plate Dimension: 150 X 150 mm, Plate Material Should be Glass Ceramic Silicon.Heated are should be 120 X 120 mm.Heater Power: 500 Watt.Maximum Plate Temperature: 4500C ., Stirrer Speed should be 100 to 2000 rpm. Maximum stirring capacity should be 15 Litres.Small foot print : 172 X 246 x 122 mm. Warranty - 03 years. (Price should be mandatorily quoted for 3 year for both biosafety cabinet and Motorized control Hot Plate with Magnetic Stirrer) Delivery & Installation at 2nd floor of the building including labor should be carried by the party

Refer document

Refer document

Refer document