Tender For Stg Of Rajapur To Dadlana In Panipat District ( Cm Announcement No. :- 26200 ) ( Road Id - 7646 ) - 1 [ 11.25.2 ] Pointing On Brick Work Or Brick Flooring With Cement Mortar 1:3 ( 1 Cement : 3 Fine Sand ) : 2. Raised And Cut Pointing 2 [ 17.22.2 ] Water Bound Macadam Gr I 2. Water Bound Macadam Grading I With Screening Type Aproviding, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With 3 Wheeled Steel / Vibratory Roller 8-10 Tonnes In Stages To Proper Grade And Camber, Applying And Brooming Requisite Type Of Screening / Binding Materials To Fill Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Complete As Per Technical Clause 404 Of Mort&H Specifications 3 [ 17.23.2 ] Water Bound Macadam Grading - Ii 2. Water Bound Macadam - Ii With Screening Type A / Type Bproviding, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With 3 Wheeled Steel / Vibratory Roller 8-10 Tonnes In Stages To Proper Grade And Camber, Applying And Brooming Requisite Type Of Screening / Binding Materials To Fill Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Complete As Per Technical Clause 404 Of Mort&H Specifications 4 [ 17.25 ] Prime Coat @ 0.85Kg Per Sqm Providing And Applying Primer Coat With Bitumen Emulsion On Prepared Surface Of Granular Base Including Clearing Of Road Surface And Spraying Primer At The Rate Of 0.85Kg / Sqm Using Mechanical Means As Per Technical Clause 503 Of Mort&H Specifications 5 [ 17.26.2 ] Tack Coat 2. Providing And Applying Tack Coat With Penetration Grade Bitumen Vg - 10 Using Bitumen Pressure Distributor At The Rate Of 0.30 Kg Per Sqm On The Prepared Bituminous / Granular Surface Cleaned With Mechanical Broom As Per Technical Clause 503 Of Mort&H Specifications 6 [ 17.33.1 ] Open - Graded Premix Surfacing 20 Mm Thickness 1. Providing, Laying And Rolling Of Open - Graded Premix Surfacing Of 20 Mm Thickness Composed Of Crushed Stone Aggregates Of Specified Grading Premixed In A Continuous Type Of Hot Mix Plant Of Appropriate Capacity Not Less Not Less Than75 Tonne Per Hour, With Bituminous Binder Vg - 10 @ 1.46 Kg Per Sqm, Laid With Paver Finisher Mechanical Androlling With A Smooth Wheeled Roller 8-10 Tonne Capacity, Finished To Required Level And Grades Complete As Per Technical Clause 510 Of Mort&H Specifications. 7 [ 17.36.3 ] Seal Coat 3. Type B With Vg - 10 Bituminous Binderproviding And Laying Of Premix Sand Seal Coat Premixed In Continuous Type Hmp Of Appropriate Capacity Not Less Than 75 Tonnes / Hours Using Specified Fine Aggregates And Penetration Grade Bitumen @0.68 Kg / Sqm Laid To Specified Levels, Grade And Cross Fall Complete As Per Technical Clause 511 Of Mort&H Specifications. 8 [ 17.43.2 ] Laying Of Recycled Bituminous Pavement With Central Recycling Plant Upto 75Mm 2. Milling On Bituminous Surface: Dismantling Of Existing Damaged Bitumen Surface By Cold Milling Machine Up To Any Depth And Hauling The Milled Material Up To Any Lead And Stacking At Nearest Recycling Plant Site. 9 [ 17.6 ] Construction Of Embankmentwith Material Obtained From Borrow Pits Na Construction Of Embankment Cbr 8% ( For New Road / Raising / Berms / Etc. ) With Approved Material Obtained From Borrow Pits, Including Compensation Of Earth With All Lead And Lift Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Table 300-2, As Per Technical Clause 305 Of Mort&H Specifications. 10 [ 17.61.1 ] Pipe Culverts 1. Providing And Laying 600 Mm Dia Reinforced Cement Concrete Pipe Np3 / Np-4P / Prestressed Concrete Pipe On First Class Bedding In Single Row Providing And Laying Reinforced Cement Concrete Pipe Np3 / Np-4 / Prestressed Concrete Pipe For Culverts On First Class Bedding Of Granular Material In Single Row Including Fixing Collar With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets 1000 Mm Dia, As Per Clause 2900 Of Mort&H Specifications 11 [ 17.66.1 ] Rectangular Concrete Block Pavement 1. Providing And Laying Of Cement Concrete Blocks Of Size 0.450 M X 0.300 M X 0.15 M Of Cement Concrete ( C.C ) M30 Grade And Spreading 25 Mm Thick Sand Underneath Filling Joints With Sand On Existing W.B.M. Base As Per Technical Specification Clause 1503 12 [ 17.69.2 ] Interlocking Concrete Block Pavement 2. Providing And Laying 80 Mm Thick Isi Marked Interlocking Paver Blocks Conforming To Is 15658:2006 / Irc Sp 63: 2004 Of All Shapes And Colours In Design Mix Cement M 40 Over The Bed Of 30 Mm Thick Fine Sand Complete In All Respect. 13 [ 34.12.2 ] Advance Direction Sign Board 900X900 Square As Per Irc 67- 2012 Withretro Reflective Sheeting As Per Astm D 4956 09 And As Per Irc 67 2012 Fixed Over 4 Mm Thick Aluminium Composite Material ( Acm ) Sheeting Having Aluminium Skin Thickness Of 0.4 To 0.5 Mm On Both Sided And Fixing The Same With Suitable Size Aluminium Alloy Rivets @ 200 Mm C / C To Back Support Frame Of 25X25x3mm Angle Iron Supported On A Square Hollow Steel Section Post 60X60x3.2Mm Conforming To Is 4923 Without Cost Of Definition Plate Firmly Fixed To Ground In Foundation Concrete M-25 Of Size 0.45X0.45X0.75M For Vertical Post Complete As Per Clause 801 Of Mortandh Specifications. Supplier Shall Provide A Warranty As Per Clause 6.9 Of Irc 67-2012 For Retro Reflective Sheeting And A Certified Copy Of Test Reports From An Independent Test Laboratory Including Three Year Outdoor Weathering Test Report For Sheeting Tested In India Condition Conforming To Clause 6.7 Of Irc 67-2012 2. Using High Intensity Microprisomatic Grade Retro Reflective Sheeting Class B As Per Irc 67 2012 14 [ 34.26 ] Road Marking With Hot Applied Thermoplastic Compound With Reflectorising Glass Beads On Bituminous Surface Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2.5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35 .The Finished Surface To Be Level, Uniform And Free From Streaks And Holes. 15 [ 34.27.3 ] Kilometre Stonereinforced Cement Concrete M25 Grade Kilometre Stone Of Standard Design As Per Irc:8-1980, Fixing In Position Including Painting And Printing Etc Complete As Per Technical Clause 804 Of Morth Specifications 3. Kilometre Stone For Village Roads 16 [ 34.27.4 ] Kilometre Stonereinforced Cement Concrete M25 Grade Kilometre Stone Of Standard Design As Per Irc:8-1980, Fixing In Position Including Painting And Printing Etc Complete As Per Technical Clause 804 Of Morth Specifications 4. 200 Meter Stone 17 [ 34.34 ] Moulded Shank Road Stud Supplying And Fixing Of Single Mould Twin Shank Reflective Road Studs Made Out Of Poly Carbonate / Abs Moulded Body And Reflective Panels With Micro Prismatic Lenscapable Of Providing Total Internal Reflection Of The Light Entering The Lens Face With Retro Reflectance And Chromaticity Values @ Astm E 809 & Astm D 4280. The Detailed Specifications And The Product Shall Conform To Astm D4280 And Astm E 809. The Raised Pavement Marker Shall Also Meet All The Testing Conditions Of Astm D4280 Like Abrasion Resistance And Fixed To The Road Surface Using The Epoxy Adhesive. Two Cylinderical Polymer Shanks Of Not Less Than 20 Mm Diameter And Not Less Than 30 Mm Length Shall Be Moulded In The Rpm Body. The Marker Shall Support A Load Of 13635 Kg Tested In Accordance With Astm D4280.The Marker Shall Withstand Flexural Strength Of 909 Kgf Force In Accordance With Astm D4280. Marker Lenses Shall Be Moulded Of Polycarbonate Or Methyl Methacrylate Conforming To Astm D788. The Supplier Shall Provide A 2 Years Warranty For Satisfactory Field Performance As Per Clause 804.7.3 Of Mort&H 5Th Revision Specifications. 18 [ 34.4.2 ] Cautionary Sign Board 900X900x900mm Triangular As Per Irc 67- 2012 With Retro Reflective Sheeting As Per Astm D 4956 09 And As Per Irc 67 2012 Fixed Over 4Mm Thick Aluminium Composite Material ( Acm ) Sheeting Having Aluminium Skin Thickness Of 0.4 To 0.5 Mm On Both Sided And Fixing The Same With Suitable Size Aluminium Alloy Rivets @ 200 Mm C / C To Back Support Frame Of 25X25x3mm Angle Iron Supported On A Square Hollow Steel Section Post 60X60x3.2Mm Conforming To Is 4923 Without Cost Of Definition Plate Firmly Fixed To Ground In Foundation Concrete M-25 Of Size 0.45X0.45X0.75M For Vertical Post Complete As Per Clause 801 Of Mortandh Specifications. Supplier Shall Provide A Warranty As Per Clause 6.9 Of Irc 67-2012 For Retro Reflective Sheeting And A Certified Copy Of Test Reports Including Three Year Outdoor Weathering Test Report For Sheeting Tested In India Condition From An Independent Test Laboratory Conforming To Clause 6.7 Of Irc 67-2012 2. Using High Intensity Microprisomatic Grade Retro Reflective Sheeting Class B As Per Irc 67 2012 19 [ 4.14.1 ] Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sqm On Plan ) , Including Dressing Of Sides And Ramming Of Bottoms, Lift Up To 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. 1. All Kinds Of Soil. 20 [ 6.1.7 ] Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Below Plinth Level And Up To Floor Iv Level: 7. 1:5:10 ( 1 Cement : 5 Coarse Sand ( Zone-Iii ) : 10 Graded Stone Aggregate 40 Mm Nominal Size ) 21 [ 7.21.1 ] Brick Work With Common Burnt Clay Non-Modular Bricks Of Class Designation 10.5 In Foundation And Plinth In: 1. Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) 22 Reinfoced Cement Concrete M-25 Grade Village Board Of Standard Design, Fixing In Position, Including Painting And Priting Etc Complete As Per Pwd Specifications, Minimum Reinforcement 16 Kg, Embedded In Ground Upto 55 Cm In M-15 Concrete Foundation 600X700x145 As Per Haryana Pwd Specification ( Hsr 34.27.5 ) 23 Recovery Items: The Rates Quoted Against Recovery Items Will Not Be Included In The Total Amount Rather It Will Be Deducted While Calculating Financial Statement Of The Agency. Material Obtained From Dismantling Of Existing Brick Work, Bituminous Layer Have Been Calculated Taking Assumption That 80% Of Theoretical Material Will Be Retrieved. The Dismantled Material Can Used In Any Of The Item For The Work After Modification ( Bringing It To Required Specifications ) After Approval From Employer. In Case It Is Not Possible To Use This Material On The Work, The Agency Can Take Away This Material. This Material Can Be Taken Away By The Agency At The Price Quoted By The Agency But Minimum Price To Be Quoted Is Limited To Reserve Price As Fixed And Mentioned.Note:All Quantities Of The Above Materials Have Been Worked Out On The Basis Of Theoretical Quantities Laid On This Road. However, Agency May Visit Site Before Quoting Rates And Assess The Extent Of Retrieved Material. There Shall Be No Measurement After Actual Dismantling And If Material After Dismantling Is Found On Lesser Side, No Claim Of Agency On This Score Will Be Entertained And Full Recovery On The Basis Of Quoted Rate And Quantity Exhibited In The Boq Shall Be Made. The Reserve Rates Are Minimum Rates To Be Used As Base For Quoting Purchase Rate By The Agency. No Rates Below The Reserve Price Will Be Entertained And Reserve Price Will Be Considered For All Purposes In Case The Agency Quotes Lesser Than Reserve Price. 24 Providing And Laying 50-75 Mm Bm Using The Reclaimed Material To The Extent Of 30% Per Cent Of The Required Quantity After Carrying Out Necessary Check And Evaluation, Adding Fresh Material Including Rejuvenation As Required Grade, Level And Thickness All As Specified In Clause No 519 ( 5Th Revision ) 2013 Using Bitumen Vg-30 ( Minimum Bitumen Content 3.4% I / C Bitumen Of Retrieved Material As Per Job Mix Formula ) 40-60 Tph Drum Type Hot Mix Plant With Appropriate Arrangement For Use Of R.A.P., Appropriate Roller And With Hydraulic Paver Finisher With Sensor Control To The Required Grade. Note :- If Bitumen Required Is More Than 3.4% As Per Job Mix Formula, No Extra Payment Will Be Paid. Extra Bitumen Required Will Be Considered As Incidental To Work. ( Ns )
