}

Tender For Extension Of Existing Restaurant To The Hotel Tamilnadu, Hogenakkal., Dharmapuri-Tamil Nadu

Government Departments has published Tender For Extension Of Existing Restaurant To The Hotel Tamilnadu, Hogenakkal.. Submission Date for this Tender is 15-11-2023. Dismantling Work Tenders in Dharmapuri Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

40507832
Tender For Extension Of Existing Restaurant To The Hotel Tamilnadu, Hogenakkal.
Open Tender
Indian
Tamil Nadu
Dharmapuri
15-11-2023

Tender Details

Tender For Extension Of Existing Restaurant To The Hotel Tamilnadu, Hogenakkal.; 1 Dismantling The Brick Work In Cement Mortar Under 3.00 M Height Etc.., Complete. Complying With Standard Specification 2 Dismantling The Existing Precast R.C.C Columns And Roof Slab As Directed By The Departmental Engineers Includingconveyance Charges With Lead Of 5Km Away From Campus Etc., Complete Complying With Standard Specification. 3 Dismantling The Existing Damaged Door Frames With Flush Doors And Windows And Compound Wall Grill And Stacking Them For Condamanation Etc.., Complete. Complying With Standard Specification 4 Dismantling And Clearing Away Of Existing Flooring / Walltileswork In Cement Mortarincluding Shifting The Dismantedmaterialsto Outside The Premises With Lead Upto 10Km , From The City Limit Including Loading And Unloading Etc.., Complete. Complying With Standard Specification 5 Earthwork Excavation In All Soils And Sub Soils With An Initial Lead Of 10M And Lift Of 2M In Hard Stiff Clay, Stiff Black Cotton, Hard Earth, Shales, Muram, Gravel, Stoney Earth And Earth Mixed With Small Size Bolders Including Bailing Out Water If Necessary Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 6 Providing Pre - Construction Anti - Termite Treatment And Creating A Chemical Barrier To The Building By Injecting Chemical Emulsion Of Required Concentration Under Grade Slab And Grade Beam, All Round The Pile Caps, Catch Basins, Trenches, Pits, Tunnels, Wall Trenches, Back Fill, Plinth Filling, Junction Of Wall And Floor. External Perimeter Of Building, Surrounding Of Pipes, Expansion Joints, Below U.G. Sump And Retaining / Side Walls Etc. As Per Instructions Of Chemical Manufacturer As Directed By The Department Officer / Architect. The Treatment Shall Be Carried Out Strictly In Accordance With The Technical Specification And Conforming To Is 6313 Or Equivalent Bs Specification. The Chemical To Be Used As Insecticide For The Treatment Shall Be Biflex Tc, Tc Stands For Termiticide Concentrate For Termite Control ( Bifenthrin ) And The Application Shall Be Diluted 1 Part Of Chemical Biflex Tc With 49 Parts Of Water To Get 0.05% Emulsion And Strictly In Accordance With The Manufacturer’S Specification.Including Cost Of Chemicals Labour Charges, Transport And Storing Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 7 Supplying And Filling In Foundation, Basement, Etc With Filling Crushed Stone Sand In Layers Of Not More Than 15 Cm Thick Well Watered, Rammed And Consolidated Etc. Complete Complying With Standard Specification And As Directed By The Departmental Officers. 8 Supplying And Filling Of Well Gravel By Lorry In Basement Filling Including Conveyance Loading And Unloading Charges And All Other Incidential Charges Filling Laying Watering And Consolidation Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 9 Cement Concrete 1:5:10 ( One Cement, Five Crushed Stone Sand And Ten Hard Broken Stone Jelly ) Using 40 Mm Gauge Hard Broken Granite Stone Jelly For Foundationincluding Dewatering Wherever Necessary And Laid In Layers Of Not More Than 15 Cm Thick Well Rammed, Consolidated And Curing Etc. Complete Complying With Standard Specification 10 R.R Masonary In Cement Mortar1:5 ( One Cement, And Five Crushed Stone Sand ) For Foundation And Basement Including Simultaneously Pointing Above Ground Level With The Same Mortar Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 11 Damp Proof Course With Cement Mortar 1:4 ( One Cement And Four Sand ) 12Mm Thick Mixed With Best Approved Quality Water Proofing Compound Conforming To Indian Standard Specification As Specified By The Departmental Officers At 2% By Weight Of Cement Used And Finishing, Curing Etc. Complete Complying With Standard Specification. 12 Brick Work In Cement Mortar 1:5 Using Best Quality Of Second Class Ground Moulded Chamber Burnt Bricks 9 X 4-3 / 8 X 2-3 / 4 For Foundation And Basement Including Curing, Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 13 For Foundation & Basement 14 For Super Structure In Ground Floor 15 Supplying And Erecting Steel Centering Including Necessary Supports For Plane Surfaces For Reinforced Cement Concrete Works Such As Column Footings, Column Pedestals, Plinth Beams, Grade Beams, Staircase Steps, Etc. Which Require Only Nominal Strutting Using Mild Steel Sheets Of Size 90Cm X 60Cm And 10 Bg Stiffened With Welded Mild Steel Angles Of Size 25Mm X 25Mm X 3 Mm For Boarding, Laid Over Silver Oakjoists Of Size 10Cm X 6.5Cm Spaced At About 75Cm Centre To Centre Or At Suitable Intervals ( Payment For Centering Shall Be Given After The Concrete Is Laid ) Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 16 Supplying And Erecting Centering For Sides And Soffits Including Necessary Supports And Strutting Upto 3.29 M Height For Plane Surfaces As Detailed Below In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60 Cm And 10 Bg Stiffened With Welded Mild Steel Angle Of Size 25Mm X 25Mm X 3 Mm For Boarding Laid Over Silver Oak Joists Of Size 10Cm X 6.50 Cm Spaced At Abote 90 Cm Centre To Centre And Supported By Casurina Props Of 10Cm To 13 Cm Dia Spaced At Not More Than 75 Cm Centre To Centre ( Payment For Centering Shall Be Given After The Concrete Is Laid ) Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 17 For Plane Surfaces Such As Rcc Floor Slab, Roof Slab, Beams, Lintels, Bed Blocks, Landing Slab, Waist Slab, Portico Slabs And Beams, Etc. 18 For Plane Surfaces Such Asrectangular Or Square Rcc Columns, Sunshades, Top And Bottom Slab Of Rcc Boxing, Etc. 19 Providing And Laying In Position, Standardised Concrete Mix M-30 Grade In Accordance With Is:456-2000 Using 20Mm And Down Graded Hard Broken Granite Stone Jelly For All Rcc Items Of Works With Minimum Cementcontent Of 400 Kg / M3 And Maximum Water Cement Ratio Of 0.45, Including Admixture ( Plasticiser / Superplasticiser ) In Recommended Proportions As Per Is:9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability With About ( 5.0 Cu.M. ) 7730 Kg. Of 20Mm Machine Crushed Stone Jelly And With About ( 3.3 Cu.M. ) 5156 Kg. Of 10-12Mm Machine Crushed Stone Jelly And With About ( 4.79 Cu.M ) 7670 Kg. Of Crushed Stone Sand, But Excluding Cost Of Reinforcement Grill And Fabricating Charges, Centering And Shuttering And Also Including Laying, Vibrating With Mechanical Vibrators, Finishing, Curing, Etc. And Providing Fixtures Like Fan Clamps In The Rcc Floor / Roof Slabs Wherever Necessary Without Claiming Extra, The Coarse And Fine Aggregates To Be Used Should Comply With The Requirements Of Is Standards. ( No Separate Payment Will Be Made By The Department For The Excess Usage Of Materials ) Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 20 For Foundation & Basement 21 For Super Structure In Ground Floor 22 Supplying Fabricating And Placing In Position Steel Reinforcement Using Mild Steel Or Ribbed Star Rods For All Rcc Works As Per The Design Given Including Cost Of Steel And Binding Wire Also In All Floors Steel And Binding Wire Shall Be Supplied By The Contractors Etc., Complying With Standard Specifications. 23 Providing Saint Gobain Certain Teed Roofing Shingles As Per Architects Selection Including Fixing Charges Accessories Nails / Screws , Self Adhesive Bitumous / Gi / Aluminium Flashing Wherever Required 1St Row Sr Paste Applying For Starter Including Cost Of All Material And Conveyance Charges Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 24 Plastering With In Cement Mortar 1:5 ( One Cement And Five Sand ) 12Mm Thick Including In Cost And Conveyance Of All Materials And Labour Charges Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 25 Special Ceiling Plastering And Finishing All The Rcc Exposed Surface Such Of Rcc Slabs Staircase Steps Landing Slabs Etc., With Cm 1:3 ( One Of Cement And Three Of Sand ) 10Mm Thick Hacking The Surface And Providing Cement Mortar No Sing Beading Wherever Necessary Using The Same Mix As Directed By The Department Officers Etc., Complete Complying With Standard Specifications. 26 Entrance Steps : Paving The Floor With Best Approved Quality Jet Black Flamed Finish Granite Slab Of 18Mm Thick Of Size 1200Mm X600mm Laid Over A Cement Mortar Bed Of 18 / 20Mm Thick Using Cement Mortar 1:3 ( One Cement And Three Sand ) Fixing The Slabs In True Right Angles With Minimum Possible Width Of Joints And Pointing The Joints With White Cement Mixed With Matching Colouring Pigments And The Rate Is Including Cost And Conveyance Of All Materialsdirected By The Departmental Engineers Etc., Complete Complying With Standard Specification. 27 Labour Charges For Providing Double Nosing On Granite Edges With Grinding Machine Including Polishingetc., Complete Complying With Standard Specification. 28 Main Entrance Door D1:Spplying And Fabricating And Fixing In Position Of Aluminium Anodised Powder Coatedfully Glazed Using 5.50Mm Thickplain Glass At Double Leaves Doorwith 10 Mmthick Aluminium Grill.The Outer Frame Shall Be With Aluminium Box Section101.60X44.45X3.18M At 2.319Kg / M And Shutter Frame Made Of Section With Vertical & Top Rail: 50X44.45X2.50Mm@1.292 Kg / M Bottom Rail: 100X44.45X2.50Mm@ 1.974 Kg / M, Lock Rail : 50X44.45X2.5Mm @ 1.292 Kg / Malu. Clips: 17.15X17.27X1.50Mm @ 0.176 Kg / Malu. Handle: 100X30mm @ 0.988 Kg / Mouter Frame Shall Be With Aluminium Box Section 101.60X44.45X3.18M At 2.319Kg / M And With The Following Shutter Frames And Necessary Accessories Such As Aluminium Clips, Rubber Beading Pvc Felt, Handle For A Length Of Shutter ( Both Sides ) , Locking Arrangements, Furniture Fittings Such As Aluminium Tower Bolts-250X12mm - 1No, Aluminium Tower Bolt 200X12mm - 2Nos., Aluminium Door Stopper With Rubber Bush - 2Nos ., Lock-1No., Hydraulic Door Closer As Per Bis Standards Including Cost Of All Materials, Labour Charges And Power Consumption Charges Required For Fabrication Including Chipping Dismantling And Making Holes To The Required Extent In Rcc In Column / Beam / Masonry With Power Drill Wherever Neccessary And Redoing The Demaged Portion To The Original Condition After Fixing Etc. Complete.12Mm Thick Best Quality Both Sides Prelaminated Particle Board And 5.5Mm Thick Plain Glass Shall Be Used For Panelling. 10Mm Thick Aluminium Grill Of Approved Pattern And Design Including F Or H Section Shall Be Used In Glazed Portion.All Condition In Accordance With Isi Specification 1868 / 1962 Foranodic Film Thickness Of Not Less Than 15 Microns. Aluminium Sections, And Furniture Fittings Shallbe Got Approved By The Executive Engineer Incharge. 29 Supply And Fixing Ii Class Teak Wood For Frames 100X75mm Size Of Door Including All Material And Labour Charges For Teak Wood Wrought And Put Up In Position And The Size And Section As Per The Architural Drawings & Specification Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 30 Teak Wood Scantlings 2M In Length 31 T.W.Scantling Upto 3M 32 Doors Leading Service Area And Handwash Area :Doors Leading Service Area And Handwash Area :Supplying And Fixing Solid Core Particle Board Flush Shutter Of Nominal Thick Of 35 Mm With Necessary T.W. Internal Lipping Conforming To Is 2302 With Both Sides Alround Commercial Ply 35Mm Thick Including Supplying And Fixing Cost Of Wind Appliances And Furniture Fittings Such As 1No .200X12mm Aluminium Tower Bolt 2Nos. 150X12mm Aluminium Tower Bolts 1No. 250X16mm Aluminium Aldrops, 3 Nos. 200Mm ‘D’ Type Aluminium Door Handle And Door Stopper With Bush Etc., Complete As Directed By The Departmental Officers. 33 Glazing Above The Sill Wall Till The Lintel:Black Aluminum Framed Fixed Glass Al 9005 Of Powder Coated Aluminum Sections ( Heavy Duty ) Walls Above The Brick Wall To Lintel As Per Architects Design Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 34 Supplying And Fixing Black Colour Upvc ( Un-Plasticized Polyvinyl Chloride ) Windows Of Casement Type ( Open ) From The Profile The Size Of Outer Frame 60Mm X 58Mm And The Shutter Profile Are Reinforcement With Gi / 1Mm 125Gsm And 100% Corrosion Free, The Profiles Are Multi Chambered Sections With Wall Thick Of 2Mm. The Epdm Rubber ( Black Colour ) Covered With Over All The Edges Of Frame And Shutter The Shutterwill Be Provided With Espag Multi Power Point Locks And Also It Operates As Handle. The Corners And Joints Should Be Welded And Cleaned.Radiations Free Pin Headed Plain Or Brown Colour Glass 4Mm Thick Should Be Provided To The Shutter And It Should Not Allow Leakage Of Water Even Atmost Ranging Storms And Should Have Key Lockable Action, Security Protective Hinges, Strong Locking Systems And As Per Size For Arresting Noise And Energy Loss.The Connecting Mechanism Between Sash And Outer Frame That Enables Opening Of The Window.The Window Shouild Be Fixed To The Wall With 100% Packing With Screws And Silicon Packing All Round The Frames Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 35 False Ceiling : Supplying And Fixing False Ceiling With Hilux Or Equivalent Board Using Standard Size Gi Channels At A Spacing Of Not More Than 1200Mm Cc And 10Mm Thick Hilux Or Equivalent Board With Necessary Drops With Approved Designs At Appropriate Places To An Ornamental Shape Including Directed By The Corporation Officers Complying With Standard Specification 36 Wall Painting Exterior : Painting Two Coat With Premium Quality Exterior Emulsion Paint ( Weather Coat Or Weather Shield ) For Walls Of Approved Quality And Colour Over The Existing Painted Wall Surfaces Including Clean Removal Of Dirt And Preparing The Surface For Painting Including Cost And Conveyance Of All Materials, Scaffolding Charges Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 37 Texture Painting Interior :Concrete Finish Interior Painting For Walls : Roll 2 Layers Of Strato® Primer On The Entire Surface.Sand The Entire Surface In Circular Motion To Ensure The Surface Is Smooth.Scrape Strato® Cement Texture Coat Randomly To Create Pattern. Ensure The Whole Surface Area Is Covered. Then Apply Second Layer.Sand The Entire Surface In Circular Motion To Enhance The Pattern.Apply Sr-Top 1 On Entire Surface Using A Dry Sponge In Circular Motions As Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 38 Applying Full Putty Using Ready Mixed Wall Putty Of Approved Quality Over The Wall Surfaces And Ceiling Including Scrapping, Cleaning, Applying Putty And Bringing The Surfaces To A Smooth Finish Including Cost Andconveyance Of All Materials , Labour Etc.. Complete Complying With Standard Specification. 39 Wall & Ceiling Painting Interior :Painting Two Coats Of Newly Plastered Wall & Ceiling Surface With Ready Apcolite Premium Emulsion Paint And Of Approved Colour Over A Priming Coat Including Thorough Scrapping, Clean Removal Of Dirt, And Including Necessary Plaster Of Paris Putty, Wherever Required Etc., Complete Complying With Standard Specification 40 Painting Two Coats With Ready Mixed Synthetic Enamel Paint Of Approved Quality And Colour Over Existing Painted Steel Surfaces Likewindows And Ventilators Grills Including Scrapping, Cleaning, Preparing The Surfaces, Scaffolding Charges Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 41 Polishing The Teak Wood Door Frames With Two Coats Of Best French ( Lac ) Polish With Approved Quality And Brand Over A Coat Of BeeS Waxing Including Preparing The Wooden Surface To Receive Polishing, Etc., Complete Complying As Per The Standard Specifications. ( The Make, Quality And Colour Of French Polish, Bees Vax Should Be Got Approved By The Executive Engineer Before Use On Works. ) 42 Interior Arch Wall :Providing 75Mm Thick Calcium Silicate Board Panelling For Covering The Brick Work Using Aluminiuim Tubular Section Of Size 50 X 25X1.2 Mm Thick Fixing Horizontally And Vertically In Position With Floor At Interval Of 0.60M In Both Direction And Covering Inner And Outer Sides With 19Mm Thick Calcium Silicate Cement Board With All Fitting Which Is Including Cost Of Labours, Materials And Conveyance Etc.., Complete As Directed Complying With Standrad Specification. 43 Interior Wall : Manufacturing Supplying And Fixing In Position Of Bricklane Red / Cinza Terra Tiles Of Size 60X240 Mm Of Approved Quality And Design In Cement Slurry Including Cost Of Materials Labour Curing Lifting Fixing In Position Etc, Complete Complying With Standard Specification And As Directed By The Departmental Officers In All Floors. 44 Interior Bill Counter Front Wall : Manufacturing Supplying And Fixing In Position Of Brickline Silver Random Tile Of Size 75X300 Mm Of Approved Quality And Design In Cement Slurry Including Cost Of Materials Labour Curing Lifting Fixing In Position Etc, Complete Complying With Standard Specification And As Directed By The Departmental Officers In All Floors. 45 Interior Flooring :Plain Flooring Matte Finish Vitrified Tile Flooring Premium Quality 600 X600 X 9Mm Tiles To Be Fixed At Site At Floor And In Skirting Including Leveling Of The Base Below ( If Required ) With 1:4 Cement Mortar, Including Filling Of The Joints Between Two Tiles With Matching Shade Of Tile Joint Filler Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 46 Interior Flooring :Patterned Flooring Matte Finish Vitrified Tile Flooring Premium Quality 300 X300 X 9Mm Tiles To Be Fixed At Site At Floor And In Skirting Including Leveling Of The Base Below ( If Required ) With 1:4 Cement Mortar, Including Filling Of The Joints Between Two Tiles With Matching Shade Of Tile Joint Filler Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 47 Interior Wall Dadoing:Patterned Matte Finish Vitrified Tile For Wall Premium Quality 300 X300 X 9Mm Tiles To Be Fixed At Site With Spacer And Grouting Colour Selected By The Architects Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 48 Entrance Floating Steps Handrail:Supply And Fabrication Including Welding For Hand Rail Works With 50 X 50Mm M.S Square Tubular Section Of Required Size. The Rate Inclusive Of Cost And Conveyance Of Priming Coat Painting With Zinc Chromate Primer, Material And Labour Etc., Complete Complying With Standard Specification. 49 Bill Counter : Fixed Bill Counter Of Size 6.10M X 0.80M X 1.10M Made Of 38Mm Thick Back Panel And 19Mm Thick Shutters And Dividing Ply Finished With Back Plyfinished With Laying Subway Tiles Of Size 75X100x7mm And Back And Front Of Shutters Finished Laminate And 18Mm Granite Slab In The Top Portion With Laminate And Beading In Front Portion As Per Design With Necessary Shutter-4 Sets Of Double Leaf Of Size-0.58Mx0.76M & Drawer Arrangements, Furniture Fittings Such As Lock, Handles-13 Nos, Hinges-26Nos Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification.Complying With Standard Specification. 50 Wall Shelf : Fixed Plywood Shelves Of Size 2.80M X 0.30M = 3NoS And 2.10M X 0.30M = 3NoS Using 38Mm Plywood With Laminate Finish And Black Powdercoated Ms Support 25Mm X 25Mmbehind The Bill Counter. Refer Drawings For More Detail Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 51 Supplying Laying And Jointing Cpvc Pipesbest Variety Conforming To Iss Including Fixing Cpvc Specials And Fixing To Wall In Concealed Manner, Making Holes On The Wall Or Drilling Holes In Roof Etc., And Making Good Of The Dismantled Portions Etc., Complete Under Concealed Internal Water Supply Arrangements 52 32Mm Dia Cpvc Pipe 53 20Mm Dia Cpvc Pipe 54 Supply And Fixing 32Mm Diagun Metal Gate Valve ( Heavy Duty ) Of Approved Quality ( Isi ) And Brand Including Cost And Conveyance Of All Materials Complying With Standard Specification. 55 Supplying And Fixing In Position Pvc Nahini Trap Of Various Sizes With Best Stainless Steel Gratings Of Approved Brand And Quality , Fixed Over A Bed Of Brick Jelley Lime Concrete 1:2:5 ( One Part Of Lime Two Parts Of Sand And Mortar 1:3 ( One Cement And Three Sand ) Including Dismandling Masonry Works Wherever Found Necessary And Making Good The Damaged Portions To The Original And Giving Connections To The Cast Iron Pipe As Directed Etc., Complete, Complying With Standard Specification. 56 Supplying And Fixing Of 100Mm Dia C.P. Cocoroch Trap With C.P.Gratings Of Approved Quality ( Jaguar ) As Directed. 57 Supplying And Fixing In Position Best Quality Pvc Soil / Waste Pipes Of Various Dia Having 6 Kg / Sq.Cm. Pressure Bis Mark And Providing Leak Proof Joints Using Pvc Adhesives Including Fixing To The Wall With Special Pvc / Ms Clamp, Teak Wood Plugs, Brass Screws, Etc., And Making Connection To All Sanitary Fittings, Dismantling Masonry / Rcc Works Wherever Found Necessary And Making The Good Dismantled Portion To The Original Condition, Including Testing For Any Leakages, Etc., Complete Complying With Standard Specifications. ( The Pvc Pipes Should Be Got Approved By The Executive Engineer Before Use On Works ) . The Rate For Earth Work Excavation Will Be Measured And Paid Separately In The Cases Where The Pipe Lines Are Proposed To Laid Below Ground Level 58 Pvc Pipe 110Mm Dia 59 Pvc Pipe 75Mm Dia 60 Pvc 110Mm Dia Elbow 61 Pvc 110Mm Dia Door Elbow 62 Pvc 75Mm Dia Elbow 63 Pvc 75Mm Dia Door Elbow 64 Washbasin Mirror With Led Light:-Supplying And Fixing Washbasin Mirror Of Size 1.80Mx0.75M And4mm Thickteak Woodborder Frame Andled Light At Borderfixing With Threaded Type Screw / Bolt Arrangements Including Cost And Conveyance Of All Materials , Labour Etc.. Complete Complying With Standard Specification. 65 Supplying And Fixingof Counter Top Jaquar_Thin Rim Table Top Basin Opalops-Wht- 15905 Of Size 415X415x145 Mm Wash Hand Basin With All Accessories Such As Cast Iron Brackets, 32Mm Dia Cp Waste Coupling, Rubber Plug And Chain, 32Mm Dia B Class Gi Waste Pipe, 15Mm Dia Gm Wheel Valve, 15Mm Dia Nylon Connection, 15Mm Dia Brass Nipples, 15Mm Cp Pillar Tapjaquar Single Lever Tall Boycontinentalprime Cop-Chr-005Bpm 140X270mm Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 66 Wiring With 2 X1.5 Sq.Mm. ( 22 / 0.3 ) Pvc Insulated Single Core Unsheathed Copper Conductor Of 1100 V Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling And Switch Drop Portion Pvc Rigid Pipe Concealed In Wall With Pvc Accessories With Module Gi Switch Box In Flush With Wall With 6A One Way Module Switch With Module Front Plate With Continuous Earth Wire Connection Of 14 Swg Tc Wire With Painting Of Suitable Colour For Open Pvc Light Point / Fan Point ( For Electronic Regulator ) 67 Wiring With 2X1.5 Sq.Mm. ( 22 / 0.3 ) Pvc Insulated Single Core Unsheathed Copper Conductor Of 1100 V Grade In Suitable Pvc Rigid Pipe Concealed In Wall And Ceiling With Pvc Accessories With Suitable Module Gi Switch Box In Flush With Wall With 1 No. 6A One Way Module Switch And 1 No. 6A 3 / 2 Pin Module Socket With Module Front Plate With Continuous Earth Wire Connection Of 14 Swg Tc Wire And Making Good Of The Concealed Portion With Painting Of Suitable Colour For Concealed Pvc Pipe Plug Point. 68 Wiring With 2 X 4 Sq.Mm. ( 56 / 0.3 ) Pvc Insulated Single Core Unsheathed Copper Conductor Of 1100 V Grade In Suitablepvc Rigid Pipe Concealed In Wall And Ceiling With Pvc Accessories With Suitable Module Gi Switch Box In Flush With Wall With 1 No. 16A One Way Module Switch And 1 No. 16A 3 / 2 Pin Module Socket With Module Front Plate With Continuous Earth Wire Connection Of 14 Swg Tc Wire And Making Good Of The Concealed Portion With Painting Of Suitable Colour For Concealed Pvc Pipe Power Plug Point. 69 Supply And Run Of 2 Of 1.5 Sq.Mm. ( 22 / 0.3 ) Pvc Insulated Sc Unsheathed Copper Conductor Of 1100V Grade In Suitable Pvc Rigid Pipe On Wall And Ceiling With Continuous Earth Wire Connection 14 Swg Tc Wire With Painting Of Suitable Colour. 70 Supply And Run Of 2 Of 2.5 Sq.Mm. ( 36 / 0.3 ) Pvc Insulated Sc Unsheathed Copper Conductor Of 1100 V Grade In Suitable Pvc Rigid Pipe Concealed In Wall And Ceiling With Continuous Earth Wire Connection Of 14 Swg Tc Wire And Making Good Of The Concealed Portion With Suitable Colour. 71 Supply And Run Of 2 Of 4 Sq.Mm. ( 56 / 0.3 ) Pvc Insulated Sc Unsheathed Copper Conductor Of 1100V Grade In Suitable Pvc Rigid Pipe Concealed In Wall And Ceiling With Continuous Earth Wire Connection Of 14 Swg Tc Wire And Making Good Of The Concealed Portion With Suitable Colour. 72 Supply And Run Of Rg-06 Unarmoured Co-Axial Cable For Tv In Rigid Pipe Concealed In Wall And Ceiling And Making Good Of The Concealed Portion With Suitable Colour. 73 Supply And Run Of Cat-6 Unarmoured Lan Cable In Rigid Pipe Concealed In Wall And Ceiling And Making Good Of The Concealed Portion With Suitable Colour. 74 Supply And Run Of 2 Pair Unarmoured 0.5Mm Telephone Cable In Rigid Pipe Concealed In Wall And Ceiling And Making Good Of The Concealed Portion With Suitable Colour. 75 Supply And Fixing Of 1 No.6 / 16 A Two Module Socket , 1 No. 32A One Module Sp Mcb With Module Cover Plate ( Plastic ) On Suitable Module Concealed Box ( Gi ) In Flush With Wall With Connections. 76 Supply And Fixing Of 1 No One Moduletv Socket With Module Cover Plate ( Plastic ) On Suitable Module Concealed Box ( Gi ) In Flush With Wall With Connections. 77 Supply And Fixing Of 2 Nos One Module Rj-45 I / O Socket Ans 2 Nos Rj-11 I / O Socket With Module Cover Plate ( Plastic ) On Suitable Module Concealed Box ( Gi ) In Flush With Wall With Connections. 78 Supply And Fixing Of20 Watts Ceiling Spot Light Fitting With 95*110Mm Dimensions Philips / Osram Or Equivalent Make Including Giving Electrical Connection Etc., Complete. 79 Supply And Fixing Of4 Watts Ceiling Pendent Light Fitting With 360*1300Mm Dimensions Philips / Osram Or Equivalent Make Including Giving Electrical Connection Etc., Complete. 80 Supply And Fixing Of5*4 Watts Accent Ceiling Pendent Light Fitting With 3X4feet Philips / Osram Or Equivalent Make Including Giving Electrical Connection Etc., Complete. 81 Supply And Fixing Of4 Watts Wall Light Fitting With Philips / Osram Or Equivalent Make Including Giving Electrical Connection Etc., Complete. 82 Supply And Fixing Of18 Watts 4 Feet Led Wall Light Fitting With Philips / Osram Or Equivalent Make Including Giving Electrical Connection Etc., Complete. 83 Supply And Fixing Of Led Profile Light With Required Run Of Mains And Drive Unit Including Giving Eelctricla Connection Etc., Complete. 84 Supply And Fixing Of 1200Mm ( 48 ) Sweep Ac Ceiling Fan Complete With Stepped Electronic 300W Regulator With 1 Metre Down Rod With Fan Clamp With Side Plates And Cross Arm Of Size 450Mm ( 18 ) Including Giving Electrical Connection Etc., Complete. 85 Supply And Fixing Of 1.5 Ton Split Air Conditioner Having 3 Star Rating ( Both Indoor & Outdoor Unit ) With 3 Mtr Copper Pipe And Control Wire Including Remote Unit. The Rate Inclusive Of Material, Labour And Transportation Etc., Complete. 86 Supply And Fixing Of 5 / 8 And 3 / 8 Copper Pipe And Control Wire With Water Drain Pipe Line ( 1” Pvc Pipe ) Covered With Nitrle Rubber Insulation For Refrigerant And Drain Pipe Lines Etc., Complete. 87 Supply And Fixing Of Ms Stand For Fixing Outdoor Unit With Suitable Bolts & Nuts Etc., Complete. 88 Supply And Installation Of 4 Kva Capacity Automatic Voltage Stabilizer With Time Delay Relay Etc., Complete. 89 Supply And Installation Of Lg / Samsung Or Equivalent Make 43Inch Led Commercial Television Set Incluidng Wall Mount Etc., Complete. 90 Supply And Fixing Of Led Signage Board With Required Materials Asper Architech Design Including Run Of Mains And Electrical Connection Etc., Complete. 91 Supply And Fixing Of 8 Wayvertical Tpmcb Sheet Steel Distribution Boards Flush Type / Surface Type Fitted With Bus Bars And Neutral Links With Single / Three Phase Mcb Outgoings And Separate 4 Way Provision For Accommodating One No. 4 Pole Incoming Mcb / Isolator With Label Holder And Provisions For Taking Up Cable For Size Not Less Than 35 Sq.Mm Including Giving Electrical Connection Etc., Complete. 92 Earthing As Per The Isi Specification With An Earth Electrode Of 2.10 Metre Class B Gi Pipe Of Dia Not Less Than 40Mm With Copper Earth Plate Of Size 125Mm X 50Mm X 6Mm With Necessary Funneling Arrangements With Necessary Masonry Work And With 38Mm Rcc Cover Slab For The Brick Masonry. 93 Supply And Run Of 1 Of No.8 Swg Gi Wire For Earth Connection. 94 Supply And Installation Of Dining Chair Of Size 16.5 X 20 Made Of Stream Beach Wooden Frame Legs With Wallnut Polish, Backrest Should Be Wooden Frame Along With Cane Finish, Seating Portion Will Be Leatheratte Finish. Refer Drawings For More Detail Directed By The Departmental Engineers Including Cost Of Material, Labour Etc., Complete Complying With Standard Specification. 95 Supply And Installation Of Dining Table Of Size 48 X 30 With Anti Scratch Ceramic Top ( With The Thickness Of 15Mm ) And Stream Beach Wooden Base With Wallnut Shade . Refer Drawings For More Detail Directed By The Departmental Engineers Including Of Material, Labour Etc., Complete Complying With Standard Specification. 96 Interior Fixed Continues Bench :Fixed Plywood Bench Without Back Rest With Rounded Edges 4 Inch Thick With Leatheratte Finish Seating Portion Size Of 1 7 For Height Of 1 6 From Floor Level And 19Mm Thick Plywood Withlaminate Finish Fully Covered As Per Architects Design . Refer Drawings For More Detail Directed By The Departmental Engineers Etc., Complete Complying With Standard Specification. 97 Gst At 18%

Key Value

Document Fees
INR 17700 /-
EMD
INR 88400.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail