|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B |
| 2 | Supplying and fixing 8 way, Double door , single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 3 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 4 | Supplying and fixing 63A rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 5 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, SP miniature circuit breaker suitable for inductive load of single poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 6 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 7 | 5/6 A switch |
| 8 | 15/16 A switch |
| 9 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 10 | 3 pin 5/6 A socket outlet |
| 11 | 6 pin 15/16 A socket outlet |
| 12 | Supplying of 18 watt LED lumunar fixture complete with LED retrofit metallic lampbatten fixture powder coated box type body i/c marking of Text and number as required. |
| 13 | Supplying and fixing out door type loop in loop out cable junction box (200 mm X 150 mm X100 mm)fabricated from 1.6 mm MS sheet enclosed wheather proof, dust proof, water proof and locking arrangement internally embedded gasket with bottom cable entry plat through cable glands. Seperate for incoming and out goingcables and wires duly fitted with following in it.HD Connector for 10 to 16 sqmm-4 Nos.6 amp SP \"C\" curve 10 KA MCB-1 No.fixing Clamps-2 Nos. |
| 14 | Supplying of XLPE insulated and PVC tape innersheated aluminiumaluminium conductor armoured cable of 1.1 KV grade of following sizes confirming to IS:7098 (Part- I) 1988 with up to date ammendment as required. |
| 15 | 2x10 sqmm |
| 16 | 3.5x35 sqmm |
| 17 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size up to 35 sqmm in the existing masonry open duct as required. |
| 18 | Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size up to 35 sqmm on wall / pole / steel structure surface as required. |
| 19 | Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size up to 35 sqmm in ground including excavaation, sand cushioning , protective covering and refiling the trench etc as required |
| 20 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade at over head with 8 SWG dia GI wire, Shackle insulator, clamp, nut bolt cable clips etc as required. |
| 21 | Supplying and laying ofHDPE pipe for under-pass of Railway Trac for Electrical power supply cable as required. (Pressure Class 10 (Kgf/cm2), 2 inch, Size 63(mm), Material Grade PE 63) |
| 22 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL / HDPE pipe as required. |
| 23 | Upto 35 sqmm |
| 24 | Supplying and making end termination with brass compression gland and aluminium lugs for FOLLOWING sizeof PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 25 | 2 X10 sq. mm (19mm) |
| 26 | Supplying of Decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base with 23W LED bulb For Depot entrance gate(2 Nos). |
| 27 | Supplying of Wall fan Swing |
| 28 | Supplying of9 watt LED Decorative ultra slim round profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack |
| 29 | Providing and fixing M.V danger notice plate of 200mm X150mm, made of mild steel at least 2mm thick and vitroeus enameled white on both sides and with inscription in single red color on front side as required |
| 30 | Supplying of Outdoor aesthetically designed 100 wattLED Flood Light Luminare with single piece die cast aluminium housing, (including driver) with IP rating of IP66, complete with internal wiring, with extremely precision designed heat sink suitable for top open for easy maintenance, complete with IP66 protection Class, with polycarbonate cover .The fixture should be suitable formounting. |
| 31 | Supplying and fixing of light class G.I. pipe of follwing dia. (nominal)3 metre length along the pole/wall for protection of under ground cable as required |
| 32 | 50 mm dia |
| 33 | The items are to be dismentalled where the work has to be executed and take away by the giving the credit to the work estimate |
| 34 | Lighting fixtures, cable, wires, switch gears etc. |
