Tender For Annual Plan-Cherukunnu Gp, Project No. 74/2024-Renovation Of Public Ponds-General Civil Work, Kannur-Kerala

Annual Plan-Cherukunnu Gp, Project No. 74 / 2024-Renovation Of Public Ponds-General Civil Work; 1 Maintenance Work 2 2.32:Clearing Grass And Removal Of The Rubbish Up To A Distance Of 50 M Outside The Periphery Of The Area Cleared. 3 Od202231 / 2023-2024:Bailing Out Water Using 5Hp Pump- Bailing Out Water With 5Hp Engine And Pump Set Including Conveyance To Site And Erection, Cost Of Fuel, Lubrication Oil And Other Stores, Pay Of Staff Etc Complete ( Dar 60.2.2 ) 4 Od176344 / 2023-2024:Including Lifting Charge 1.5M To 3M Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means Over Areas ( Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan ) Including Disposal Of Excavated Earth, Lead Up To 50 M And Lift Up To 3.0 M, Disposed Earth To Be Levelled And Neatly Dressed. All Kinds Of Soil 5 4.1.3:Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level:1:2:4 ( Cement : 2 Coarse Sand ( Zone-Iii ) : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 6 5.1.3:Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level:1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 7 5.9.5:Centering And Shuttering Including Strutting, Etc. And Removal Of Form For:Lintels, Beams, Plinth Beams, Girders Bressumers And Cantilevers 8 5.22.6:Steel Reinforcement For R.C.C Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Levelthermo - Mechanically Treated Bars Of Grade Fe-500D Or More 9 14.1.1:Repairs To Plaster Of Thickness 12 Mm To 20 Mm In Patches Of Area 2.5 Sq Meters And Under, Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete, Including Disposal Of Rubbish To The Dumping Ground Within 50 Meters Lead:With Cement Mortar 1:4 ( 1 Cement : Fine Sand ) 10 13.1.1:12 Mm Cement Plaster Of Mix:1:4 ( 1 Cement : 4 Fine Sand ) 11 13.48.1:Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications:Two Or More Coats Applied On Walls @ 1.25 Ltr / 10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr / 10 Sqm 12 10.28:Providing And Fixing Stainless Steel ( Grade 304 ) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature ( Wherever Required ) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I / C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In-Charge, ( For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc. ) 13 Od203782 / 2023-2024:Granular Sub Base Materials With Well Graded Materials ( Table 400.1 ) A0 By Mix In Place Method Construction Of Granular Sub Base By Providing Well Graded Materials, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, Complete As Per Technical Specification Clause 401. Iii ) For Grading Iii Material. ( Modified 4.1.A.3 Mord Data ) 14 Od203833 / 2023-2024:Providing And Laying 60Mm Thick Factory Made Cement Concrete Interlocking Paver Block Made By Block Machine With Strong Vibratory Compaction Of Approved Size Design And Shape Laid In Required Colour And Pattern Over And Including 50Mm Thick Compacted Bed Of Stone Aggregate 6Mm Nominal Size Filling The Joints With Fine Sand Etc. All Complete As Per The Direction Of Engineer-In-Charge. Vertically Including Cost And Conveyance Of All Materials All Labour Charges, Fabricating Etc. Complete. ( Modified 16.68 By Replacing Sand Bed 6Mm Stone Aggregate Bed ) 15 13.71:Lettering With Black Japan Pint Of Approved Brand And Manufacture

INR 1095 /-

INR 12391.0 /-

Refer document