|
| 1 | Demolition of plain cement concretein ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed. |
| 2 | Demolition of stone slabs and tiles of any description or thicknessin floors laid, bedded and pointed in any mortarincluding disposal of demolished material n.exc 1.5 km complete all as specified and directed. |
| 3 | Brick work with sub class ‘B’ bricks old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:4, Including dismantling old brick work complete all as specified & directed. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premisses, complete all as specified and directed. |
| 5 | Glazed ceramic tiles in vertical surface 300mm x 450mm x 7mm thick, joint free, first quality, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4 , complete all as specified and directed. |
| 6 | Non skid, joint free ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 Square Metre but not exceeding 0.18 Square Metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, overand including 15mm thick screed bed in cement mortar 1:6 , complete all as specified and directed. |
| 7 | Vitrified ceramic tiles coloured first quality dark shade 8 to 10mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 Square metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6complete all as specified and directed. |
| 8 | Granite stone slabs, 16 to 18mm thick,width and length as per site requirement, best qualitymachine cut andpolished to be fixed infloors,cooking plateform, tread, raiser of steps and vertical surfaces etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing, cutting / rounding of edgesand corners where required with and including 15 mm thick screed bed in cement mortar 1:4, Complete all as specified and directed. |
| 9 | 10mm thick rendering cement plaster in Cement and Sand mortar 1:6 over concrete /brick surfacesfinished even and smooth without using extra cement, including taking down existing plaster complete all as specified & directed. |
| 10 | 15mm thick rendering cement plaster in Cement and Sand mortar 1:4 over concrete /brick surfacesfinished even and fairincluding taking down existing plaster complete all as specified & directed. |
| 11 | 5mm thick rendering cement plaster in Cement and Sand mortar 1:3 over brick work or concrete surfacesfinished even and fair, as in ceiling, chajjas, facias, at any position, cincluding taking down existing plaster complete all as specified & directed. |
| 12 | Preparation of old decorated wall / ceiling surfaces by removing spoiled paint/ scale dirt with wire brush, sand paper etc including washing rubbing the surface and applying wall care putty of thickness not less than 1.00mm and smoothning the surface by sand papers and applying one coat of white wall primer complete all as specified & directed. |
| 13 | Preparation of new plastered surfaces of walls and applying two coats of cement base paint including all necessary wetting and curing, complete all as specified and directed. |
| 14 | Preparation of new plastered surfaces of wallsand applying two coats of oil bound distemper over a coat of primer, over and including 2mm thick (average) wall care putty and sand papering, complete all as specified & directed by Engineer-in-charge. |
| 15 | Preparation of new surfaces of ceiling and applying two coats ofwhite wash , complete all as specified and directed. |
| 16 | Pre-painted galvalume aluminum zinc coating (AZ-70) GI based corrugated steel sheet 0.50mm thick in any colour and patteren as approved by the GE of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, including dismantling old AC sheet complete all as specified and directed. |
| 17 | Reinforced cement concrete, 1:2:4(nominal mix, type B-0, using 12.5mm graded crushed stone aggregate) as in slabs supported on walls, beams etc, shelves and the like complete, all as specified and directed . |
| 18 | High strength deformed bar TMT bars for reinforcement, 10mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engineer-in-Charge. |
| 19 | Solid PVC board 16-18mm thick, interior grade white colour, fixed with screws as in kitchen cupboard, shutter, shelf,wrap free , impact resistant, fire resistant and smell free including taking out old board complete, all as specified and directed. |
| 20 | Continuous (piano) hinges, mild steel bright finish, width of flap 40mm, complete all as specified and directed. |
| 21 | PVC body magnetic shutter catcher for kitchen cup boards, fixed with standard steel screws, complete all as specified and directed. |
| 22 | Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each, and removal from site complete all as specified & directed. |
| 23 | Taking down chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed. |
| 24 | Taking down chowkhats or frameexc 1.5 Sqm but n.exc 4 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed. |
| 25 | Solid PVC frame (Single Rebated) of size 75mm x 50mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) |
| 26 | Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 27 | Pressed steel frames 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc,including fill of PCC 1:3:6 complete all as specified and directed. |
| 28 | Flush shutters 35mm thick factory made solid core construction with block board core and ply wood face panels, commercials type on both sides,including a shop coat of pink primer,complete all as specified & directed. |
| 29 | Glazed and gauged skelton shutter, 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (with sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed. |
| 30 | steel window, box type,as in repair, primer coated, 1.00mm wall thickness, with glazing bar and openable shutter prepared to recieve sheet glass, complete including cutting holes four Nos. for taking down the window ,making good dismantled portion in PCC (1:2:4) type B-1. including following fittings welded to frame/ shutter:-(a) Hold fast 150mm out of 25x6mm flat iron made to shape- 04 Nos. each window (02Nos. on each side).(b) Handle of \"Z\" section 20mmx25mm, 100mm long- 01No. each leaf.(c) MS tower bolt 150mm long- 02 Nos. each leaf.(d) \"Z\" section 20mmx25mm, 100mm long stopper 01 No. each leaf. (e) Cleat 55mm long of hollow square section 15mmx15mm of 24 guage wall thickness, welded to hinge of 55mm size 01 No. per leaf.(f) MS box type hinges of 75 mm size- 02Nos. per leaf.(g) Fabrication & fixing complete.Note: Glass panes & painting shall be measured & paid separately under respective item.s. Design shall be approved from Engr-in-Charge as existing at site and all as per Drawingbefore fabrication and bulk order to the manufacturer. |
| 31 | Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples , fixed in repairs, all as specified. |
| 32 | 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty (or beading)in square n.exc 0.5 Square Metre in each pane, complete all as specified and directed. |
| 33 | 3mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading )in square n.exc 0.5 Square Metre in each pane,complete all as specified and directed. |
| 34 | Framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165, fixed as in repaircomplete all as specified & directed by Engineer-in-charge. |
| 35 | Rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to grade Fe.290.Gde-E-165, fixed as in repair complete all as specified and directed. |
| 36 | Extruded aluminium alloy handles, fabricated type, 150mm long , all as specified. |
| 37 | Extruded aluminium alloy handles, fabricated type, 100mm long , all as specified. |
| 38 | 300 mm longAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and directed. |
| 39 | 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and directed. |
| 40 | 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified and directed. |
| 41 | 100 mm size butt hinges medium weight cold rolled mild steel complete, all as specified and directed. |
| 42 | 300mm mild steelordinary rat tail rod pattern spring ,including roller and roller plate, fixed as in repairs, complete all as specified and directed. |
| 43 | Two coats of synthetic enameled painton steel and iron surfacesover 10 cm width or girth over a coat of red oxide including preparation of new surfaces complete all as specified & directed. |
| 44 | One coat of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth , including preparation of old surfaces , complete all as specified & directed. |
| 45 | One coat of synthetic enameled paint on old wooden surfaces of any description ,including preparation of old surfaces , complete all as specified & directed. |
| 46 | Preparation of old plastered surfaces of walls and applying Two coats of cement base paint, complete all as specified and directed. |
| 47 | Wash hand basin, vitreous china, flat back , white , ofsize550X400mm, including waste coupling, angle brackets and PVC waste pipe, fixed as in repair, complete all as specified and directed. |
| 48 | Vitreous China Wash down water closet (pedestal pattern) , white, with and including PVC seat cover, complete all as specified and directed. |
| 49 | Vitreous china squatting pan “Orissa” pattern of size 580mm x 440mm, white with integral foot rests(excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete, set with cement concrete, fixed as in repairs, complete all as specified & directed. |
| 50 | Bib taps brass, with wall flange, chromium plated, cast copper alloy fancy type, short body, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs, complete all as specified and directed. |
| 51 | Stop valve cast copper alloy, screwed down high pressure, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 52 | 15mm dia PVC connection with PTMT nut,of length 450mm, fixed as in repairs, complete all as specified and directed. |
| 53 | Bevelled edge mirror size 600mm x 450 mm, 5mm thick of selected quality glass mounded on 6 mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washer with aluminium channel of suitable section alround , fixed as in repair complete all as specified & directed. |
| 54 | Chromium plated, fancy type shower rose with swivel joints 75mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repairs,complete all as specified and directed |
| 55 | Wall mixer 3-in-1 with provision of bath hand shower and over head shower complete 115mm long bend pipe connecting leg and wall flange cast copper alloy, fancy type, chroumium plated suitable for 15mm bore GI bore pipe fixed as in repair complete all as specified and directed. |
| 56 | 15mm bore pillar tap, fancy type,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixedin repair, complete all as specified and directed. |
| 57 | Central hole Basin Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe fixedin repair, complete all as specified and directed. |
| 58 | Bathroom mirror cabinet , size 622mm x 422mm fixed with and including chromium plated brass screws and PVC rawl plugs, fixed as in repair complete all as specified and directed. |
| 59 | Kitchen sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and CP waste coupling, overall size 915mm x 460mm, with bowl of size 410mm x 330mm x 160mm incl fixing cantilever brackets and connection to union, pipe, fixed as in repair including removal of old kitchen sink of stainless steel with brackets, complete all as specified and directed. |
| 60 | 786mm x 914mm x 254mm plate rack stainless steel with steel shelves, made out of 1mm thick sheet and hanging arrangement for utensil , fixed as in repair, complete all as specified and directed. |
| 61 | 610mm x760mm x 254mm plate rack stainless steel with steel shelves, made out of 1mm thick sheet and hanging arrangement for utensil , fixed as in repair, complete all as specified and directed. |
| 62 | Hand jet chromium plated (health faucet with 01 m PVC pipe) for 15mm bore with fittings, fixed as in repairs ,complete all as specified and directed. |
| 63 | PVC valve less syphonic action type flushing cistern low level, dual flush, white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes includingand 32mm dia PVC long bend for squat pattern etc , fixed as in repairs, complete all as specified & directed. |
| 64 | PVC (SWR) pipe, type \"B\" 75mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mmincluding nuts bolts etc, fixed as in repair complete all as specified and directed. |
| 65 | PVC (SWR) pipe, type \"B\" 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mmincluding nuts bolts etc, fixed as in repair complete all as specified and directed. |
| 66 | 110mm bore PVC (SWR) bend any radius , fixed in repairs, complete all as specified and directed |
| 67 | 75mm bore PVC (SWR) bend any radius , fixed in repairs, complete all as specified and directed |
| 68 | 15mm dia GI tubing medium grade with all fittings , fixed into walls, ceiling or laid under floors and taking down existing tubing, complete all as specified and directed. |
| 69 | 20mm diaGI tubing medium grade with all fittings , fixed into walls, ceiling or laid under floorsand taking down existing tubing, complete all as specified and directed. |
| 70 | Cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) or PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth, complete all as specified and directed. |
| 71 | Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) of 500 litres capacity, double layered hoisted and fixed in position, including tank nipple, including taking down old tank, complete all as specified and directed. |
| 72 | Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) of 1000 litres capacity, double layered hoisted and fixed in position, including tank nipple, including taking down old tank, complete all as specified and directed. |
| 73 | Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 20mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 74 | Plain cement concrete 1:7:12 type F-2 using 40mm graded brick aggregate as in sunken floor filling and mass concrete, complete all as specified & directed. |
| 75 | Material and labour 75mm thick PCC 1:4:8 type D-2 (using 40m graded crushed stone aggregate) as in sub base flooring, finished even and rough to receive top layer, all as specified and directed. |
| 76 | Water proofing treatment to sunken portion and adjoining walls of kitchen, WC, Bath & Toilet, etc, as follows, complete all as specified & directed :-(a) 15 mm thick plaster in cement mortar (1:3) mixed with WP compound as per manufacturer\"s instructions shall be provided on sunken portion after roughening of surfaces. (b) Apply cement slurry to the surface @ 0.488 kg /Sqm of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.253 kg/Sqm and the surface will be allowed to air cure for 4 hours.(c) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and the surface will be allowed to air cure for 4 hours.(d) Pond curing of sunken portion for minimum of 48 hours.(e) Paste one layer of 3mm thick APP membrance with bitumen by torch application to the the treated sunkensurface.(f) Joints/ traps /WC /soil pipes shall be properly sealed with approved sealing compound. |
| 77 | Water proofing to roof surface as follows, complete all as specified and directed :-(a) Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment.(b) Demolition of mud phuska as in roof of any thickness inclduing plastering, leeping, any existing treatment etc removal.(c)50mm thick average thickness, PCC 1:2:4, nominal mix, type B-1, using 20 mm graded mechanically crushed stone aggregate as in padding, , finished even and smooth without using extra cement.(d) 3mm thick Atactic polypropylene polymer (APP) modified prefabricated five layer water proofing membrane, based polymeric membrane minimum weighing 3.6kg/sqm andreinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying one coat of bituminous aluminium paint @100gm/sqm on top of membrane. |
| 78 | 40mm thick brick tileswith including 20mm thick cement mortar 1:4 jointedgrouted and pointed complete mixed with crude oil5%by weight of cementcomplete all as specified and directed. |
| 79 | All as per serial item No 78 herein before but except tiles –ditto- |
| 80 | Cleaning and removing all scale and dirt etc from overhead water storage tanks of capacity exc 250 but n.exc 500 litres and from mouths of circulating pipes etc complete, all as specified and directed. |
| 81 | Plain cement concrete 1:2:4 type B-0 using 12.5mm graded aggregate as in roof kerbs or mud stops rounded or chamfered on edges, complete all as specified & directed. |
| 82 | 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in flooring, finished even and fair including finishing surfaces by brooming, all as specified and directed. |
| 83 | Supplying, fabricating and fixing of monkey menacegalvanised mild steel sheet of size 400 x 150 mm x 0.50mm , making of 10 Nos sharp spikes (05 Nos each side) by cutting and bending (saw pattern) as directed including providing of 02 Nos holes for fixing to PVC overhead tank with nut and bolts,complete all as specified and directed. |
| 84 | Cutting scrubs and tree grown on building (at any location and height ) including digging out roots, filling holes with cement mortar 1:3 or PCC 1:2:4 type B0 including applying two coat of anti vegetation chemical complete all as specified and as directed |
| 85 | Supply only Integral waterproofing compound, all as specified. |
| 86 | Powder coated aluminum sections as inframes/ shutter of doors/window/ventilators /partitions,(Sliding / openable)including joinging cleats, glazing clips, rubber neoprene beading, powder coated aluminim snap beading, screws etc. complete all as specified and directedNote : (i) Minimum thickness of power coating shall not be less than 50 micron.(ii) Weight of aluminum section only shall be measuerd and paid.(iii) Aluminum doors/windows /ventilators to be fixed to jambs with chromium plated screws .(iv) The rate shall be inclusive of neoprene beadings, snap beading, screws etc and in case of sliding shutters locking arrangement and rollers in sliding shutters. Weight of fitting fixtures will not be measured for arriving the weight of aluminum section.(v) Glass /wooden panel/ACP sheet shall be measured and paid separately under respective items.(vi) Design as directed by Engineer in charge. |
| 87 | Supply only 4.80mm thick ordinary quality tinted glass,fixed to aluminum frame workin panels exc 0.5 Sqm in each pane, complete all as specified & directed. |
| 88 | Supply only 3mm thick aluminium composite panel sheet (ACP) colour as approved by Engr In Charge all as specified and directed. |
| 89 | Coloured non skid porcelain tiles exterior grade 300x300x9-10mm thick heavy duty (Endura from Johnson or equivalent) as in floor, set and jointed in neat slurry and pointed in coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in cement mortar 1:6, including taking out of old tiles,complete all as specified and directed |
