Tender For Repairs And Renovation Of 2Nd Floor Janatha Bazar Iisc => Limited ; 1 Dismantling Tile Work In Floors, Walls, Skirting And Roofs Laid In Cement Mortar Including Stacking Material To The Appropriate Disposal Area As Per Direction Of Engineer-In-Charge.For Thickness Of Tiles 10 Mm To 25 Mm 2 Dismantling Of Flushing Cistern Of All Types ( C.I. / Pvc / Vitreous China ) / Washbasin / Iwc Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials To The Appropriate Disposal Area As Per Direction Of Engineer-In-Charge. Washbasin 3 Removing Of Existing Old Sanitary And Plumbing Pipelines, Stacking And Disposing It With All Cost And Conveyance Labour For All Items Of Work, Hom Of Equipment With All Lead And Lift, Loading And Unloading, Transportationcharges And All Other Incidental Charges Etc., Complete As Per Specification And Directions Of The Engineer-In-Charge Of The Work. 4 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material To The Appropriate Disposal Area As Per Direction Of Engineer-In-Charge.In Cement Mortar 5 Dismantling Steel Work In Built Up Sections In Angles, Tees, Flats And Channels Including All Gusset Plates, Bolts, Nuts, Cutting Rivets, Welding Etc. Including Dismembering And Stacking To The Appropriate Disposal Area As Per Direction Of Engineer-In-Charge.For Chimney Work 6 Dismantling Wooden Boardings In Lining Of Walls And Partitions, Excluding Supporting Members But Including Stacking To The Appropriate Disposal Area As Per Direction Of Engineer-In-Charge .Thickness Above 10 Mm Up To 25 Mm 7 Providing Brick Work With Common Burnt Clay Non Modular Bricks Of Class Designation 3.5 In Superstructure Above Plinth Level In All Shapes And Sizes In Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) Including Cost Of All Materials, Labour, Scaffolding And Usage Charges Of Machinery & Other Incidental Charges Complete As Per The Direction Of Engineer Incharge Of Work 8 Providing Half Brick Masonry With Common Burnt Clay Non Modular Bricks Of Class Designation 3.5 In Superstructure Above Plinth Level Up To Floor 1 Level Cement Mortar 1:3 ( 1 Cement :3 Coarse Sand ) Including Cost Of All Materials, Labour, Scaffolding And Usage Charges Of Machinery & Other Incidental Charges Complete As Per The Direction Of Engineer Incharge Of Work. 9 Providing 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix :1:6 ( 1 Cement: 6 Fine Sand ) Including Rounding Off Corners Wherever Required Smooth Rendering, Providing And Removing Scaffolding, Including Cost Of Materials, Labour, Curing Complete As Per Specifications And As Per Directions Of Engineer-In-Charge 10 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete As Per Specifications And As Per Directions Of Engineer In Charge 11 Wall Painting With Acrylic Emulsion Paint, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour. One Coat As Per Specifications And As Per Directions Of Engineer In Charge. 12 Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade :Two Coats On New Work After Thoroughly Brooming The Surface To Remove All Dirt, Dust, Mortar Drops And Foreign Matter Including Preparing The Surface Even And Sand Paper Smooth, Cost Of Materials, Labour Complete As Per Specifications And As Per Directions Of Engineer-In-Charge. 13 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade :One Coats On Old Work As Per Specifications And As Per Directions Of Engineer In Charge 14 Providing And Laying In Position Plain Cement Concrete For Levelling Course For All Works In Foundation. The Granite / Trap / Basalt Crushed Graded Coarse Aggregates And Fine Aggregates As Per Relevant Is Codes Machine Mixed, Laid In Layers Not Exceeding 150 Mm Thickness, Well Compacted Using Plate Vibrators, Including All Lead & Lifts, Cost Of All Materials Of Quality, Labour, Usage Charges Of Machineries, Curing, And All The Other Appurtenances Required To Complete The Work As Per Technical Specifications. ( The Cost Of Steel Reinforcement & Formwork Shall Be Paid Separately ) .Mix 1:3:6 ( M10 ) Using 20 Mm Nominal Size Graded Crushed Coarse Aggregates 15 Providing & Fixing Glass Panes With Putty , Nails, Wooden Fillets And Glazing Clips Wherever Required In Doors, Windows, Clerestory Windows, All Complete With : 5.5 Mm Thick Glass Panes Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications And As Per Directions Of The Engineer-In-Charge 16 Providing And Fixing Chlorinatedpolyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. Internal Work.Exposed On Wall A ) 25 Mm Nominal Dia Pipes 17 Providing And Fixingweld Mesh 75Mm X 25Mm 6G X 10Gwith Including Two Coats Approved Paint Etc., Complete. ( Including Cost Of Screws ) . 18 Providing And Fixing Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications And As Per Directions Of The Engineer-In-Charge 19 Providing Flush / Ruled / Struck Or Weathered Pointing Pointing On Shahabad / Kota Stoneflooring With Cement Mortar 1:3 ( 1 Cement : 3 Fine Sand ) After Raking Joints To Depth Nicely Lining, Including Cost Of Materials, Labour, Curing As Per Specifications And As Per Directions Of EngineerIn-Charge. 20 Providing And Fixing White Vitreous China Pedestal Type Water Closet ( European Type ) With Seat And Lid, 10 Litre Low Level White Vitreous China Flushing Cistern & C.P. Flush Bend With Fittings & C.I. Brackets, 40 Mm Flush Bend, Overflow Arrangement With Specials Of Standard Make And Mosquito Proof Coupling Of Approved Municipal Design Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required :W.C. Pan With Isi Marked White Solid Plastic Seat And Lid. 21 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm ( Thickness To Be Specified By The Manufacturer ) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Jointing With Grey Cement Slurry @ 3.3 Kg / M2 Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete. 22 Providing And Fixing Skirting With Teak Shade Pre-Laminated ( One Side Decorative And Other Side Balancing Lamination ) Flat Pressed 3 Layer Or Graded Particle Board ( Medium Density ) Grade I, Type Ii, Is :12823 Marked, With Necessary Fixing Arrangements And Screws, Including DrillIng Necessary Holes For Rawl Plugs Etc. And Priming Coat On Unexposed Surface Complete :18 Mm Thick 23 Repair Of Pull And Push Type Rolling Shutters Of Made Of 18 Guage, 75Mm Wide Cold Rolled Steel Laths Of Convex Corrugation, With Side Guides And Bottom Rail, With Interlocking Arrangements For Steel Laths By Means Of Alternate Clips, Suspension Shaft With High Tension Coil Type Springs Two Numbers, Mounted On Specially Designed Pipe Shaft, With Bracket Plates, Guide Channels, Ball Bearing Arrangements, For Inside & Outside Locking With Push & Pull Operations The Which Ever Parts Unserviceable Should Be Replace ( Springs, Wheels, Shaft & Replace The Leafs Which Corroded ) New One With All Necessary Including Cost Of Materials, Labour, Complete As Per Specifications ---- Including Cost Of All Materials, With All Lead, 24 Providing And Fixing 150 Mm Bright Finished Floor Brass Door Stopper With Rubber Cushion, Necessary Brass Screws Etc. To Suit Shutter Thickness Complete 25 Floor Polishing On Shahabad / Kota Stoneto Give An Even Surface Including Preparing The Surface After Thoroughly Brooming The Surface To Remove All Dirt, Dust, Mortar Drops And Foreign Matter , Cost Of Materials, Labour Complete As Per Specifications And As Per Directions Of Engineer-In-Charge. 26 Cleaning Of Office Floors, Toilet Floors, Corridors, Lobbies, Partitions, Storage Units, Furnitures, Electrical & Electronic Equipments, Doors, Windows, Curtains, Blinds Etc., Including Cleaning Of Dust, Etc., Using Suitable Bombay Broom Stick, Squezers, Floor Cleaning Liquids Etc Complete. 27 Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm ( Average ) Thick Base Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge : ** Flamed Finish Granite Stone Slab Black, Cherry Red, Brown, Cat Eye, River Pink Or Equivalent. 28 Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge To The Appropriate Disposal Area 29 Providing And Fixing 100 Mm Wide Venitian Blinds Of Window Fashion Fabric Of Taiwan Make, With 50Mm Thick Powder Coated Channel With Balance, Imported , Acrylic Self Alignable Mechanism And Equally Placed Spacers, Imported Tilting Mechanism For Easy Tilting Operation, Wiith Nylon Imported Thread And Beadings, 100Mm Wide Imported Washable Resusable Fabric Placed With Top Hanger And Bottom With 100Mm Long Bottom Plate Connected To Nylon Imported Bottom Link Chain.The Rate Is Inclusive Of Drilling Holes For Fixing Channels To The Wall, Fixing Threads And Beadings And Link Chains, Hard Ware Fixtures Etc., Complete As Per Drawing, Specifications. 30 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is:1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) :For Fixed Portion: Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications. 31 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is:1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) :For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required ( Fittings Shall Be Paid For Separately ) Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications. 32 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of EngineerIn-Charge: Pre-Laminated Particle Board With Decorative Lamination On Both Sides Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications And As Per Directions Of The Engineer-In-Charge. 33 Providing And Fixing Aluminium Round Shape Handle Of Outer Dia 100 Mm With Ss Screws Etc. Complete As Per Direction Of EngineerIn- Charge: Powder Coated Minimum Thickness 50 Micron Aluminium Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications And As Per Directions Of The EngineerIn-Charge. 34 Providing And Fixing Brass 100Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles ( Best Make Of Approved Quality ) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications 35 Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand Manufacture Conforming To Is : 6315, Having Brand Logo Embossed On The Body / Plate With Double Spring Mechanism And Door Weight Upto 125 Kg, For Doors, Including Cost Of Cutting Floors, Embedding In Floors As Required And Making Good The Same Matching To The Existing Floor Finishing And Cover Plates With Brass Pivot And Single Piece M.S. Sheet Outer Box With Slide Plate Etc. Complete As Per The Direction Of Engineer-In-Charge: With Stainless Steel Cover Plate Minimum 1.25 Mm Thickness Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications. 36 Providing And Laying 300 Mm Diameterhume Pipes For Exhaust Fan Opening In Walls Rate Includes Cost Of All Materials, Machinery, Labour Etc., Complete With All Lead And All Lifts. 37 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) :With Float Glass Panes Of 5 Mm Thickness ( Weight Not Less Than 12.50 Kg / M² ) Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications.
