Tender For Renovation Works In The Office Of Cvo; 1 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge In Cement Mortar: 2 Demolishing R.C.C. Work Manually / By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer - In- Charge. 3 Demolishing Cement Concrete Manually / By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In - Charge. Nominal Concrete 1:3:6 Or Richer Mix ( I / C Equivalent Design Mix ) . 4 Excavating Trenches Of Required Width For Pipes, Cables, Etc Including Excavation For Sockets, And Dressing Of Sides, Ramming Of Bottoms, Depth Upto1.5 M, Including Getting Out The Excavated Soil, And Then Returning The Soil As Required, In Layers Not Exceeding 20 Cm In Depth, Including Consolidating Each Deposited Layer By Ramming, Watering, Etc. And Disposing Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M : Pipes, Cables Etc. Exceeding 80 Mm Dia. But Not Exceeding 300 Mm Dia. 5 Demolishing Stone Rubble Masonry Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge : In Cement Mortar. 6 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) . 7 12 Mm Cement Plaster Of Mix : 1:4 ( 1 Cement: 4 Fine Sand ) . 8 Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete. 9 Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc ( Volatile Organic Compound ) Content. With Water Thinnable Cement Primer On Wall Surface Having Voc Content Less Than 50 Grams / Litre. 10 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 11 Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade :Two Or More Coats On New Work. 12 Providing And Laying Vitrified Tiles In Floor In Different Sizes ( Thickness To Be Specified By The Manufacturer ) With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement: 4 Coarse Sand ) Jointing With Grey Cement Slurry @3.3 Kg / Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc. The Tiles Must Be Cut With The Zero Chipping Diamond Cutter Only . Laying Of Tiles Will Be Done With The Notch Trowel, Plier, Wedge, Clips Of Required Thickness, Leveling System And Rubber Mallet For Placing The Tiles Gently And Easily. Glazed Vitrified Tiles Matt / Antiskid Finish Of Size Size Of Tile 600 X 600 Mm. 13 Providing And Laying Vitrified Tiles In Different Sizes ( Thickness To Be Specified By Manufacturer ) , With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, Inskirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) , Jointing With Grey Cement Slurry @ 3.3 Kg / Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm. 14 Providing And Fixing Glazed Screen Printed Border Tile 75Mm Wide Having Thickness 5Mm, Of Approved Quality & Make, In All Shades, Design And Prints, In Dado, Over 12Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3 Kg / Sqm Including Pointing With White Cement Mixed With Pigment Of Matching Shade, All Complete As Approved By Engineer - In - Charge. 15 Providing & Fixing False Ceiling At All Height Including Providing & Fixing Of Framework Made Of Special Section, Power Pressed From M.S. Sheets And Galvanised With Zinc Coating Of 120 Gms / Sqm ( Both Side Inclusive ) As Per Is : 277 And Consisting Of Angle Cleat Of Size 25Mm Wide X 1.6Mm Thick With Flanges Of 27Mm And 37Mm, At 1200Mm C / C, One Flange Fixed To The Ceiling With Dash Fastener 12.5Mm Dia X 50Mm Long With 6Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25 X10 X0.50Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hangerfixed With Intermediate G.I Chanels 45 X15 X 0.90Mm Running At The Spacing Of 1200 Mm C / C, To Which The Ceiling Section 0.5Mm Thick Bottom Wedge Of 80Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5Mm, At 450Mm C / C, Shall Be Fixed In A Direction Perpendicular To G.I Intermediate Channel With Connecting Clip Made Out Of 2.64Mm Dia X 230Mm Long G.I Wire At Every Junction, Including Fixing Perimeter Channels 0.50Mm Thick 27Mm High Having Flanges Of 20Mm And 30Mm Long, The Perimeter Of Ceiling Fixed To Wall / Partitions With The Help Of Rawl Plugs At 450Mm Centre, With 25Mm Long Dry Wall Screws @ 230Mm Interval, Including Fixing Of Calcium Silicate Board To Ceiling Section And Perimeter Channels With The Help Of Dry Wall Screws Of Size 3.5 X25mm At 230Mm C / C, Including Jointing & Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Ecommended Jointing Compounds, Jointing Tapes, Finishing With Jointing Compounds In Three Layers Covering Up To 150Mm On Both Sides Of Joints And Two Coats Of Primer Suitable For Boards, All As Per ManufactureS Specification And Also Including The Cost Of Making Opening For Light Fittings, Grills, Diffusers, Cut Outs Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specificaton And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With: 8 Mm Thick Calcium Silicate Board Made With Calcareous & Siliceous Materials Reinforced With Cellulose Fiber Manufactured Through Autoclaving Process. 16 Dismantling Doors, Windows And Clerestory Windows ( Steel Or Wood ) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : Of Area 3 Sq. Metres And Below. 17 Providing And Fixing Of 110Mm Upvc Pipe10kg ( Supreme / Jindal / Astral ) Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 18 Providing And Fixing Of 80Mm Upvc Pipe 10Kg ( Supreme / Jindal / Astral ) Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 19 Providing And Fixing 15Mm Gi Pipe Class-C ( Jindal Hisar / Tata / Ashirwad ) Work Should Be Complete In All Respect As & Including Fittings Required As Per Direction Of Engineer - In - Charge. 20 Providing And Fixing 25Mm Cpvc Pipe ( Supreme / Ashirwad / / Astral ) Work Should Be Complete In All Respect Including All Reruired Fittings As Per Directions Of Engineer - In - Charge. 21 Providing And Fixing 25Mm Gate Valve ( Leader / Sant / Zoloto ) Work Should Be Complete In All Respect Including All Reruired Fittings As Per Directions Of Engineer - In - Charge. 22 Providing And Fixing 15Mm Gate Valve ( Leader / Sant / Zoloto ) Work Should Be Complete In All Respect Including All Reruired Fittings As Per Directions Of Engineer - In - Charge. 23 Providing And Fixing 15Mm Gi Union ( Unique Or Equivalent ) Work Should Be Complete In All Respect Including All Reruired Fittings As Per Directions Of Engineer - In - Charge. 24 Providing And Fixing 25Mm Cpvc Union ( Supreme / Ashirwad / / Astral ) Work Should Be Complete In All Respect Including All Reruired Fittings As Per Directions Of Engineer - In - Charge. 25 Providing And Fixing 25Mm S / S Clamp ( Astral Or Equivalent ) Work Should Be Complete In All Respect Including All Reruired Fittings As Per Directions Of Engineer - In - Charge. 26 Providing And Fixing 110Mm Upvc Door Tee Band10kg ( Supreme / Jindal / Astral ) Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 27 Providing And Fixing 80Mm Upvc Door Tee10kg ( Supreme / Jindal / Astral ) Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 28 Providing And Fixing 110Mm Upvc Door Tee Band 10Kg ( Supreme / Jindal / Astral ) Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 29 Providing And Fixing 80Mm Upvc Door Tee Band 10Kg ( Supreme / Jindal / Astral ) Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 30 Providing And Fixing 110Mm Upvc Cowel10kg ( Supreme / Jindal / Astral ) Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 31 Providing And Fixing 80Mm Upvc Cowel 10Kg ( Supreme / Jindal / Astral ) Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 32 Providing And Fixing 80Mm P-Trap10kg ( Supreme / Jindal / Astral ) Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 33 Providing And Fixing 300Mmx300mm Gully Trap Of Chinaware Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 34 Construction Of600mm X 600Mm Manhole Depth 2Feet Work Includes, Water Proofing Fron Inside With Proper Method, Cc At The Base, Brick Work, Plaster Work, Making Provision Of Openings For Pipes, Manhole Cover Ci Etc Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 35 Providing And Fixing P-Trap Conceal Water Closet Wall Mounting One Set ( Make Parryware / Hindware / Jaquar ) Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 36 Providing And Fixing Wash Basin Of Medium: 20” - 30” Length, 19” - 24” Width & About 7” Depth ( Make Parryware / Hindware / Cera ) Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 37 Providing And Fixing Angle Valve Of 15 Mm Cp ( Make Jaquar / Cera / Parryware Model : Con-059Kn ) Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 38 Providing And Fixing Wash Basin Cp Mixture ( Make Jaquar / Cera / Parryware ) Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 39 Providing And Fixing Health Fucet ( Make Jaquar / Cera / Parryware ) Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 40 Providing And Fixing Cp Short Bib Cock ( Make Jaquar / Cera / Parryware ) Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 41 Providing And Fixing Jetspray ( Chilly / Jaquar / Hindware ) Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 42 Providing And Fixing 125Mm Cp Ggrating Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 43 Providing And Fixing Single Towel Rail 450 Mm Long ( Make Jaquar / Cera / Hindware ) Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 44 Providing And Fixing Soap Dispenser ( Make Jaquar / Cera / Parryware ) Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 45 Providing And Fixing Soap Dish ( Make Jaquar / Cera / Parryware ) Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 46 Providing And Fixing Heavy Duty 18 Pvc Connection Pipe Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 47 Providing And Fixing Toilet Paper Holder ( Make Jaquar / Cera / Parryware ) Work Should Be Complete In All Respect & Fittings Required As Per Direction Of Engineer - In - Charge. 48 Shifting Of Malba To The Appropriate Point Of Disposal From The Office Of Rtc Project As Per The Directions Of Engineer-In-Charge. 49 Providing Fixing Of 250Mm Exhaust Fan| Cut Out Size: 11.4X11.4 Square Inches| Watt: 35| Rpm: 1200| Air Delivery: 860| Suitable For Bathroom. 50 Providing & Fixing Of 6Mm Silvered Mirror: Float Glass, Silvered To Give Maximum Reflection, Free From Tarnishing, Discoloration, Scratches And Other Defects Visible In The Designed Viewing Conditions.Plasterboard / Plastered Blockwork, To Provide A True Surface Both Horizontally And Vertically, Polished Edges.Overall 6Mm Thick. 51 Sitc Of The Wall Mountable Water Purifier Ro+Uv+Uf ( Kent / Eureka Fobes / Aqua Guard / Livpure ) 8 Ltr Storage, Complete In All Respect Including Necessary Fittings, Pipe, Drain Etc 52 Supply And Installation Of Wallmounting Braket Fan 400 Mm Sweep Single Phase, Ac 230 V, 50 Hz With All Acessories Etc. 53 Supplying And Drawing 2 Pair 0.5 Mm Dia Frls Pvc Insulated Annealed Copper Conductor, Unarmoured Telephone Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required. 54 Supplying And Drawing 4 Pair 0.5 Mm Dia Frls Pvc Insulated Annealed Copper Conductor, Unarmoured Telephone Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required. 55 Supplyand Installation Of Split Air Conditioner Nominal Cooling Capacity In 2.0 Ton / ( Kcal / Hr ) : 2 Ton / 6000 Kcal / Hr ( A ) Coil Material: 100% Copper Coil B ) Compressor: Rotary Bee Star Rating: Minimum : 3 ) ( Make : Hitachi / Daikin / Voltas / Carrier ) . 56 Providing And Fixing Of Power Cable Between Indoor To Outdoor Unit Of Split Ac As Per Requirement ( 4 Core X 2.5 Mm ) 57 Providing And Fixing Refrigerant Copper Piping With Tubular Insulation Suitable For 2.0 Tr Split Ac. 58 Ms Stand For The Outdoor Unit ( Floor / Wall Mounted Type ) 59 Sitc Of Pvc Drain Pipe 25 Mm Dia With Necessary Fittings And Clamps As Per Requirement. 60 Providing & Fixing Of Ceiling Fan Blade Length 1200Mm Of 60W Minimum Make Usha / Crompton / Havells ) . 61 Providing & Fixing Of Mirror Lights 16W Of Make Phillips / Havells / Crompton. 62 Providing & Fixing Of Ac Point- Dpmcb With Box 32A With All Other Necessary Required Fitting In The Work As Per The Requirement Of Engg-In-Charge. 63 Providing & Fixing Of Ac Point- Dpmcb With Box 32A With All Other Necessary Required Fitting In The Work As Per The Requirement Of Engg-In-Charge.
