Tender For Supply And Installation And Commissioning Of Gas Chromatograph With Flame Ionization Detector (Gc-Fid)-Multi State

Tender For Supply And Installation And Commissioning Of Gas Chromatograph With Flame Ionization Detector (Gc-Fid) Gas Chromatograph with Flame Ionization Detector (GC-FID): Gas Chromatograph with Flame Ionization Detector (GC-FID) with Graphical user interphase & Touch screen display, GC equipped with Flame Ionization Detector, Split/Split less Capillary Inlet, Auto Injector/Sampler and with original licensed windows-based software along with a computer and printer. 1. End Use: Analysis of Essential Oils, Aroma Chemicals, Volatile Organic Compounds (VOCs) at CSIR-CIMAP Lucknow and CSIRCIMAP Research Centre, Hyderabad 2. GC-FID Detailed specifications: Column Oven:  Oven should be capable to accommodate at least two capillary columns.  Oven operating maximum Temperature range should be 450oC or better.  Oven Cool down time from 450°C to 50°C in 4.5 minutes or less  Temperature setpoint resolution: 0.1 degree C or better.  Temperature Programming Ramps: 20 Nos or higher.  Maximum temperature ramp rate of 100 degree C/min or better Pneumatics:  System must have Pneumatic Electronic/Programmable Flow Control for injectors & detectors with the facility of retention time locking Injectors: Split/Spitless Capillary Inlets: Quantity-2 Nos per GC  Split/Spitless capillary injectors with fully electronic pressure/flow controller.  Pressure range upto:100 psi or higher 2 Nos. Complete Units 01 (One) unit with all accessories to be supplied at CSIRCIMAP Lucknow and 01 (One) unit with all accessories to be supplied at CSIR-CIMAP Research Centre, Hyderabad.  Maximum operating temperature: 400oC or more  Gas saver mode Auto Injector/Sampler: Quantity-1 No per GC  Fully software-controlled Liquid Auto Sampler Injection  Capable to inject sample volume from 0.1 μL to 50 μL  Auto sampler/Injector with minimum 100 or more vials capacity. Flame Ionization Detector (FID): Quantity-2 Nos per GC  Flame Ionization Detector with electronic pressure/flow control of all gases.  Maximum Operating Temperature: 400˚C or more.  Automatic flame out detection and re-ignition feature should be available  Minimum Detection Limit should be 1.2 pg C/sec or less  Data Acquisition rate 500Hz or more  Retention time repeatability < 0.008% or <0.0008 min  Peak area repeatability less than 1% RSD or better  Linear dynamic range: 107 or better Software:  Latest Windows Operating System with Original License.  Original licensed MS-Office 2011 or above  Compatible Kovat index/Relative retention index software to calculate Retention indices. Installation Accessories:  Branded Computer with minimum i7 processor & 12th generation or higher with 16 GB RAM and 512 GB SSD along with 1 TB HDD with minimum 23.5-inch or more display monitor with Keyboard & Mouse and licensed MS Windows operating system compatible with the GC controlling software. One Branded Laser Jet Black and White printer. Warranty:  One-year Standard warranty  Two years Extended warranty after expiry of the above standard warranty. The extended warranty charges should be quoted separately with each year price breakup in the financial bid.  AMC charges should be quoted for seven years with preventive maintenance kits on annual renewal basis after expiry of both standard and extended warranties. The AMC charges should not be included in the main quote, but quoted separately in the financial bid.  Two routine visits and one preventive maintenance kit visit during the AMC period and breakdown visits, as and when required per annum. Consumables for both units separately  In addition to manufacturer’s supplied default consumables with the instrument, the following consumables also should be quoted separately. The price should not be included in the main quote, but quoted separately in the price bid.  One non-polar HP5 or equivalent 30m X .0.25mm X 0.25um GC columns  One non-polar HP5 or equivalent 50m or more X .0.25mm X 0.25um GC columns  500 numbers 2mL autosampler vials, caps and septa.  5 numbers autosample syringes 10ul and 5 numbers 1uL manual syringes  50 numbers each of ferrules, column nuts, split and splitless liners  Septa 100 numbers  O-rings 50 numbers for injector liner OTHER TERMS AND CONDITIONS  One unit with all accessories to be supplied at CSIR-CIMAP Lucknow and another unit with all accessories to be supplied at CSIR-CIMAP Research Centre, Hyderabad.  Supplier should quote their latest models of the GC system and it should be available for demonstration, if required.  The manufacturer/supplier should provide Service Support at Lucknow and Hyderabad to avoid delay in troubleshooting/servicing.  Training should be provided for GC software, operation and maintenance of the instrument at our site.  The manufacturer/ supplier should provide list of GC-FIDs supplied to the government funded academic/research institutes/PSU/ etc for the last three years along with purchase orders/installation reports.  Vendor should give undertaking for the supply of spares for at least 10 years from the date of installation  Quotations may be submitted along with original specifications catalogue and marked brochures in support of the asked GC specifications. A compliance chart should be enclosed for all the specifications. Note: Not required and don’t quote the following items: Gas Cylinders (Hydrogen, Nitrogen and Zero-Air), Gas Purifiers & Double stage gas Regulators, Purifiers and Manifold, SS Tubing, Printer & 5 KVA UPS These are available with us. Delivery schedule 1.Delivery of the consignments at CSIR-CIMAP, Lucknow and Research center Hyderabad 2. Installation & Commission 3. Training of software and instrument operation

Refer document

Refer document

Refer document