Tender For Fixing Of Rate Contract For Repairs To Electrical Equipment Installed At Different Wsss Of Jal Shakti (Phe) Mechanical Sub-Division Sopore (District Baramulla And Bandipore) For One Year., Sopore-Jammu And Kashmir

TDR : 40321633

Tender Notice
BOQ

Expired

Sopore , Jammu And Kashmir

Tender Brief : Tender For Fixing Of Rate Contract For Repairs To Electrical Equipment Installed At Different Wsss Of Jal Shakti (Phe) Mechanical Sub-Division Sopore (District Baramulla And Bandipore) For One Year.

Document Fees
₹ 1000 /-

EMD
₹ 30000.0 /-

Tender Value
Refer document

Submission Date
26-10-2023

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Providing, fitting and testing of Copper thimbles at site
2	10 Sq. mm
3	16 Sq. mm
4	25 Sq. mm
5	50 Sq. mm
6	90 Sq. mm
7	120 Sq. mm
8	150 Sq. mm
9	185Sq. mm
10	240Sq. mm
11	300Sq. mm
12	Providing, fitting and testing of Aluminum thimbles at site
13	10 Sq. mm
14	16 Sq. mm
15	25 Sq. mm
16	50 Sq. mm
17	90 Sq. mm
18	120 Sq. mm
19	150 Sq. mm
20	185Sq. mm
21	240Sq. mm
22	300Sq. mm
23	Providing, fitting of below mentioned item for repairs to 25KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site.
24	Copper wire of specific gauge for fabrication of primary / secondary coil
25	Bush rod with porcelain insulator and packing
26	Re-taping /re-insulation of coils
27	T-Oil
28	Copper strip
29	Filtration / dehydration of T-oil
30	Cost of damaged lamination
31	Providing, fitting of below mentioned item for repairs to 30KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site.
32	Copper wire of specific gauge for fabrication of primary / secondary coil
33	Bush rod with porcelain insulator and packing
34	Re-taping /re-insulation of coils
35	T-Oil
36	Copper strip
37	Filtration / dehydration of T-oil
38	Cost of damaged lamination
39	Providing, fitting of below mentioned item for repairs to 35KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site.
40	Copper wire of specific gauge for fabrication of primary / secondary coil
41	Bush rod with porcelain insulator and packing
42	Re-taping /re-insulation of coils
43	T-Oil
44	Copper strip
45	Filtration / dehydration of T-oil
46	Cost of damaged lamination
47	Providing, fitting of below mentioned item for repairs to 40KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site.
48	Copper wire of specific gauge for fabrication of primary / secondary coil
49	Bush rod with porcelain insulator and packing
50	Re-taping /re-insulation of coils
51	T-Oil
52	Copper strip
53	Filtration / dehydration of T-oil
54	Cost of damaged lamination
55	Providing, fitting of below mentioned item for repairs to 50KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site.
56	Copper wire of specific gauge for fabrication of primary / secondary coil
57	Bush rod with porcelain insulator and packing
58	Re-taping /re-insulation of coils
59	T-Oil
60	Copper strip
61	Filtration / dehydration of T-oil
62	Cost of damaged lamination
63	Providing, fitting of below mentioned item for repairs to 75KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site.
64	Copper wire of specific gauge for fabrication of primary / secondary coil
65	Bush rod with porcelain insulator and packing
66	Re-taping /re-insulation of coils
67	T-Oil
68	Copper strip
69	Filtration / dehydration of T-oil
70	Cost of damaged lamination
71	Providing, fitting of below mentioned item for repairs to 100KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site.
72	Copper wire of specific gauge for fabrication of primary / secondary coil
73	Bush rod with porcelain insulator and packing
74	Re-taping /re-insulation of coils
75	T-Oil
76	Copper strip
77	Filtration / dehydration of T-oil
78	Cost of damaged lamination
79	Providing, fitting of below mentioned item for repairs to 150KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site.
80	Copper wire of specific gauge for fabrication of primary / secondary coil
81	Bush rod with porcelain insulator and packing
82	Re-taping /re-insulation of coils
83	T-Oil
84	Copper strip
85	Filtration / dehydration of T-oil
86	Cost of damaged lamination
87	Providing, fitting of below mentioned item for repairs to 250KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site.
88	Copper wire of specific gauge for fabrication of primary / secondary coil
89	Bush rod with porcelain insulator and packing
90	Re-taping /re-insulation of coils
91	T-Oil
92	Copper strip
93	Filtration / dehydration of T-oil
94	Cost of damaged lamination
95	Providing, fitting of below mentioned item for repairs to 400KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site.
96	Copper wire of specific gauge for fabrication of primary / secondary coil
97	Bush rod with porcelain insulator and packing
98	Re-taping /re-insulation of coils
99	T-Oil
100	Copper strip
101	Filtration / dehydration of T-oil
102	Cost of damaged lamination
103	Providing, fitting of below mentioned item for repairs to 450KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site.
104	Copper wire of specific gauge for fabrication of primary / secondary coil
105	Bush rod with porcelain insulator and packing
106	Re-taping /re-insulation of coils
107	T-Oil
108	Copper strip
109	Filtration / dehydration of T-oil
110	Cost of damaged lamination
111	Providing, fitting of below mentioned item for repairs to 600KVA Voltage Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site.
112	Copper wire of specific gauge for fabrication of primary / secondary coil
113	Bush rod with porcelain insulator and packing
114	Re-taping /re-insulation of coils
115	T-Oil
116	Copper strip
117	Filtration / dehydration of T-oil
118	Cost of damaged lamination
119	Providing and fitting of single plate type Voltage regulator including extraction of damaged one, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site.
120	150mmx150mm
121	225mm x 225mm
122	200mm x 200mm
123	250mm x 250mm
124	450 mm x 450 mm
125	300x300 MM
126	375mmx 375mm
127	600 mm x 600 mm
128	Providing and fitting of double plate type Voltage regulator including extraction of damaged one, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site.
129	450 mm x 450 mm
130	600 mm x 600 mm
131	Providing and fitting of drum type Voltage regulator including extraction of damaged one, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site.
132	32A
133	63A
134	100A
135	200A
136	Providing, fitting and testing of Voltmeters at site
137	0-200V
138	0-500V
139	Providing, fitting and testing of Ammeters at site
140	0-50A with CT ratio of 5/50
141	0-100A with CT ratio of 5/100
142	0-150A with CT ratio of 5/150
143	0-200A with CT ratio of 5/200
144	0-300A with CT ratio of 5/300
145	0-400A with CT ratio of 5/400
146	Providing, fitting and testing of post type drop out set including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site.
147	Suitable for 25KVA Sub-station
148	Suitable for 63KVA Sub-station
149	Suitable for 100KVA Sub-station
150	Suitable for 250KVA Sub-station
151	Suitable for 630KVA Sub-station
152	Suitable for 33KV, 630KVA Sub-station (Heavy duty)
153	Providing, fitting and testing of link set including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site.
154	Suitable for 25KVA Sub-station
155	Suitable for 63KVA Sub-station
156	Suitable for 100KVA Sub-station
157	Suitable for 250KVA Sub-station
158	Suitable for 630KVA Sub-station
159	Suitable for 33KV, 630KVA Sub-station (Heavy duty)
160	Providing, fitting and testing of polymer type pin insulator including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site.
161	Suitable for 11 KV HT line
162	Suitable for 33 KV HT line
163	Providing, fitting and testing of heavy duty 33 KV isolator (complete assembly) including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site.
164	Replacement of damaged knives of isolator including greasing and alignment. The job includes extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site.
165	Replacement of damaged grip assembly of isolator including greasing and alignment. The job includes extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site.
166	Providing, fitting and testing of submersible copper cables of below mentioned specifications including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site.
167	10 Sq mm
168	16 sq mm
169	25 sq mm
170	35 sq mm
171	Providing, fitting and testing of copper cables of below mentioned specifications including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site.
172	19/0.0064
173	37/0.083
174	61/0.093
175	19/0.044
176	Providing, fitting and testing of 3.5 core XLPE aluminum conductor of below mentioned specifications including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site.
177	35 Sq. mm
178	50 Sq. mm
179	70 sq.mm
180	95 Sq. mm
181	120 Sq. mm
182	150 Sq. mm
183	185 Sq. mm
184	240 sq.mm
185	300 sq.mm
186	Providing, fitting and testing of 11KV post type lightening arrestor including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site.
187	Providing, fitting and testing of 33KV post type lightening arrestor (heavy duty) including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site.
188	Providing, fitting and testing of G.O.D set including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site.
189	Providing, fitting and testing of Cross arms including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site.
190	Channels 75x40
191	Angle iron support
192	F-top
193	U Clamps
194	Guy-wire with turn buckle
195	Guy-Insulator
196	Providing, fitting and testing of ACSR Conductor including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site.
197	0.03
198	0.05
199	0.10
200	Providing, fitting and testing of MCCBs (04 Pole) with breaking capacity of 35KA of approved make as per damaged MCCB at site including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site.
201	63 Amps
202	100 Amps
203	125 Amps
204	160 Amps
205	200 Amps
206	250 Amps
207	320 Amps
208	400 Amps
209	630 Amps
210	Providing, fitting and testing of MCCBs (04 Pole) with breaking capacity of 50KA of approved make as per damaged MCCB at site including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site.
211	63 Amps
212	100 Amps
213	125 Amps
214	160 Amps
215	200 Amps
216	250 Amps
217	320 Amps
218	400 Amps
219	630 Amps
220	800 Amps
221	Providing, fitting and testing of MCCBs (03 Pole) with breaking capacity of 35KA of approved make as per damaged MCCB at site including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site.
222	63 Amps
223	100 Amps
224	125 Amps
225	160 Amps
226	200 Amps
227	250 Amps
228	320 Amps
229	400 Amps
230	630 Amps
231	Providing, fitting and testing of MCCBs (03 Pole) with breaking capacity of 50KA of approved make as per damaged MCCB at site including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site.
232	63 Amps
233	100 Amps
234	125 Amps
235	160 Amps
236	200 Amps
237	250 Amps
238	320 Amps
239	400 Amps
240	630 Amps
241	800 Amps
242	Providing, fitting and testing of on load 04 pole Change over switch of approved make as per damaged change over switch at site including extraction of damaged ones, transportation, loading, unloading, fitting and successful testing on no and full load at site.
243	63 A
244	100 A
245	200 A
246	300 A
247	400 A
248	630 A
249	800 A
250	1000 A
251	Providing, fitting and testing of Combined volt-ammeter for MU-G starters
252	0-30A/0-500V
253	0-60A/0-500V
254	0-75A/0-500V
255	0-100A/0-500V
256	0-125A/0-500V
257	Providing, fitting and testing of 415V Indicating lamps
258	Red
259	Yellow
260	Green
261	Providing, fitting and testing of 415V Single phase preventor
262	Providing, fitting and testing of ML contactors for starters
263	ML 1.5
264	ML 2
265	ML 3
266	ML 4
267	ML 6
268	ML 10
269	ML 12
270	Providing, fitting and testing of Power contactors for FASD starters
271	LCIF 630
272	LCIF 400
273	LCIF 350
274	CK 95 BE-300
275	MNX 185
276	MNX 325
277	AC3-25A
278	AC3-32A
279	AC3-40A
280	AC3-50A
281	MC X 70
282	AC3- 60A
283	AC3- 63A
284	AC3- 80A
285	AC3- 100A
286	AC3- 115A
287	AC3- 125A
288	AC3- 150A
289	AC3- 185A
290	AC3- 200A
291	AC3- 250A
292	AC3- 265A
293	AC3- 330A
294	AC3- 350A
295	AC3- 400A
296	Providing, fitting and testing of ML relays
297	ML1 range 4-6.5
298	ML1 range 6-10
299	ML1 range 10-16
300	ML2/ML3 9-14
301	ML2/ML3 13-21
302	ML2/ML3 20-32
303	ML2/ML3 28-42
304	Providing, fitting and testing of FASD Panel accessories
305	Electronic timer 0- 30Sec
306	Electronic timer 0- 60Sec
307	Single Phase Preventer(Three phase type )
308	Overload relay 4A-6A
309	Overload relay 5A-8A
310	Overload relay 6A-9A
311	Overload relay 7A-10A
312	Overload relay 9A-13A
313	Overload relay 12A-16A
314	Overload relay 14A-22A
315	Overload relay 17A-25A
316	Overload relay 23A-32A
317	Overload relay 30A-40A
318	Overload relay 37A-50A
319	Overload relay 48A-65A
320	Overload relay 55A-70A
321	Overload relay 63A-80A
322	Overload relay 80A-93A
323	Overload relay 85A- 105A
324	Overload relay 80A- 115A
325	Overload relay 125A- 200A
326	Overload relay 160A- 250A
327	Overload relay 200A- 315A
328	Overload relay 250A- 400A
329	Overload relay 315A- 500A
330	Overload relay 400A- 630A
331	Overload relay 500A- 800A
332	Overload relay 630A- 1000A
333	Replacement of damaged 1 Sq mm copper power wiring
334	Providing, fitting and testing of ATS star Delta starter
335	Pneumatic timer (on delay/off delay)
336	Electromagnetic power contactor assembly (10A-250A)
337	Providing, fitting and testing of Contact points of contactors for star/delta starters
338	20HP
339	30HP
340	40HP
341	50HP
342	Providing, fitting and testing of Terminal block
343	30A-5 way
344	60A-3 way
345	60A-6 way
346	100A-3 way
347	120A-3 way
348	Providing, fitting and testing of Power contactor for MU-G starters
349	MU-G10
350	MU-G15
351	MU-G20
352	MU-G30
353	MU-G40
354	MU-G50
355	MU-G75
356	Providing, fitting and testing of controller for MU-G starters
357	Providing, fitting and testing of Overload relay/under voltage relay for MU-G starters
358	MU-G10
359	MU-G15
360	MU-G20
361	MU-G30
362	MU-G40
363	MU-G50
364	MU-G75
365	Providing and fitting of Air Circuit breaker 630 amp Manual Draw out type
366	Providing and fitting of Air Circuit breaker 800 amp Manual Draw out type
367	Providing and fitting of GSM based remote access motor control module complete replacement. Model MPU-LCD
368	Providing and fitting of Multi-Function Meter Square Dial type. Model 383, Select Make.
369	Providing, fitting and testing of Motor protection circuit breakers with thermal adjustable ranges from 0-100 amp
370	0-32 Amp (16 steps)
371	28-63 Amp (03 steps)
372	55-100 Amp (03 steps)
373	Providing and fitting of Water level control relay with capsule modules and wiring 1 Sq mm copper minimum 90 Meters
374	Nuts and bolts of different size
375	Selector Switch
376	Providing, fitting of below mentioned item for repairs to 10KVA to 50KVA Servo Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site.
377	Replacement of digital micro controlled processor based control card
378	Replacement of AC syncronous servo motor
379	Replacement of copper wound motorized auto transformer
380	Replacement of buck and boost series transformer
381	Providing, fitting of below mentioned item for repairs to 50KVA to 100KVA Servo Stabilizer including extraction of damaged items, transportation, loading, unloading, shifting back and then fitting and successful testing on no and full load at site.
382	Replacement of digital micro controlled processor based control card
383	Replacement of AC syncronous servo motor
384	Replacement of copper wound motorized auto transformer
385	Replacement of buck and boost series transformer
386	Providing and fitting of LED Lamps with angle/straight holders with backlite plate at site
387	09 Watt
388	15 Watt
389	Erection of MS tubular 9m/11m tilted pole by way of excavation of new trench and concrete bottoming including fitting/fixing of Departmental ACSR conductor on the insulators
390	Repairs to VT Motor with rating from 10HP to 50HPDismantling of the VT motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items.
391	Copper wire used in rewinding the motor.
392	Associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc.
393	Repairs to VT Motor with rating above 50HP to 150HP)Dismantling of the VT motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items.
394	Copper wire used in rewinding the motor.
395	Associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc.
396	Repairs to VT Motor with rating above 150HP to 270HP)Dismantling of the VT motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items.
397	Copper wire used in rewinding the motor.
398	Associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc.
399	Repairs to horizontal Motor with rating from 5HP to 50HPDismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items.
400	Copper wire used in rewinding the motor.
401	Associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc.
402	Repairs to horizontal Motor with rating above 50HP to 100HPDismantling of the horiontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items.
403	Copper wire used in rewinding the motor.
404	Associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc.
405	Repairs to horizontal Motor with rating above 100HP to 200HPDismantling of the horiontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items.
406	Copper wire used in rewinding the motor.
407	Associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc.
408	Repairs to submersible Motor with rating from 2HP to 50HPDismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items.
409	Copper wire used in rewinding the motor.
410	Associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc.
411	Repairs to submersible Motor with rating from and above 50HP to 75HPDismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items.
412	Copper wire used in rewinding the motor.
413	Associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc.
414	Repairs to submersible Motor with rating from and above 75HP to 100HPDismantling of the submersible motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items.
415	Copper wire used in rewinding the motor.
416	Associated/consumable items like crimpled paper, sleeves, PVC paper, bamboo sticks, thread, varnish etc.
417	Replacing of damages illumination single core multistranded copper wiring
418	1 Sq mm
419	1.5 Sq mm
420	2 Sq mm
421	2.5 Sq mm
422	4 Sq mm
423	6 Sq mm
424	Providing and fitting of bimetallic tube terminals Al-Cu for cable thicknesses
425	10 Sqmm
426	16 Sqmm
427	18 Sqmm
428	25 Sqmm
429	35 Sqmm
430	50 Sqmm
431	90 Sqmm
432	120 Sqmm
433	150 Sqmm
434	Providing, fitting and testing of AC power monitor Proton make after extraction of damaged one
435	Providing, fitting and testing of VAF Meter, Model 39A, after extraction of damaged one
436	Providing, fitting and testing of motor protection unit MPU-12, Proton make, after extraction of damaged one
437	Fabrication, providing, fitting and testing of GM bushes to the submersible motors (finished)
438	Providing and fitting of aluminium bus bar of various sizes
439	Providing and fitting of copper bus bar of various sizes
440	Providing and fiting of PVC fans for horizontal motors
441	7.50HP to 10HP
442	12.50HP to 25HP
443	30HP to 60HP
444	60HP onwards
445	Providing, fitting and testing of contactor coils after dismantling of old damamged one
446	25A
447	32A
448	40A
449	50A
450	60A
451	63A
452	70A
453	80A
454	90A
455	100A
456	110A
457	115A
458	125A
459	150A
460	160A
461	185A
462	200A
463	250A
464	265A
465	315A
466	330A
467	350A
468	LC1F 350A
469	400A
470	LC1F 400A
471	500A
472	LC1F 500A
473	630A
474	LC1F 630A
475	Providing, fitting and testing of tripping coil to handle type starter
476	Upto 30HP
477	From 40HP to 150HP
478	150HP onwards
479	Providing, fitting and testing of Controller for MU-G starters(single phase preventer/Timer with manual, automatic, byepass function)
480	MU-G10
481	MU-G15
482	MU-G20
483	MU-G30
484	MU-G40
485	MU-G50
486	MU-G75
487	Repairs to ATS Starter CoilDismantling of the ATS Starter at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successfull testing on full load. Job includes repairing / fabrication and providing / replacement of following items.
488	Copper wire used in rewinding
489	Associated/consumable items like crimpled paper, sleeves, PVC paper, thread, varnish etc.
490	Providing, fitting and testing of 6A Switch with box

Also Visit

Tenders

Jammu And Kashmir Tenders

Machinery and Tools Tenders

Hardware and Fasteners Tenders

Bolts Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Fixing Of Rate Contract For Repairs To Electrical Equipment Installed At Different Wsss Of Jal Shakti (Phe) Mechanical Sub-Division Sopore (District Baramulla And Bandipore) For One Year., Sopore-Jammu And Kashmir

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Fixing Of Rate Contract For Repairs To Electrical Equipment Installed At Different Wsss Of Jal Shakti (Phe) Mechanical Sub-Division Sopore (District Baramulla And Bandipore) For One Year., Sopore-Jammu And Kashmir

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us