Bids Are Invited For Providing And Placing In Position Of Modular Work Station With Overall Dimensions Of Work Station:1200Mm W X 600Mm D X 750Mm (Top Height) X 1200Mm (Partition Height). Modular Partitions System Coated Aluminium Trims And Supported On , New Delhi-Delhi

Bids Are Invited For Providing And Placing In Position Of Modular Work Station With Overall Dimensions Of Work Station:1200Mm W X 600Mm D X 750Mm ( Top Height ) X 1200Mm ( Partition Height ) . Modular Partitions System Coated Aluminium Trims And Supported On Legs For Better Air Circulation And Helps In Keeping Floor Clean. Panels Construction - There Shall Be Two Types Of Panel: Main Panel With Thickness Of 52Mm & Side Panel With Thickness 22.8 Mm. Each Panel Shall Have Four Horizontal Divisions. Each Panel Consists Of Vertical Extrusions 2Nos And Horizontal Extrusions Made Of 1.2Mm Thick Aluminium With Duly Powder Coated At Every Division Of Tile / Block. Each Panel Have Bottom Frame Fabricated For 52.4Mm Panel Comprises Of L-Channels Made Of 2Mm Thick Crca Steel ( Is: 513 ) , Formed Plates Of 3Mm Thick Hr Steel ( Is: 2062 ) & Erw Steel Tube Of Size 35X15x1.6Mm Thick In Oval Cross Section ( Is: 7138 ) Welded Together. The Complete Bottom Frame Shall Be Powder Coated With An Average Of 50-60 Microns Thickness Of Epoxy Powder Coating. The Bottom Frame Is Bolted With The Upright Verticals. Each Panel Is Provided With 2Nos Legs Of Height 120Mm Are Fixed At The Bottom Frame Of The Panel. Legs Are Fabricated By Co2 Welded Ms Tube Of Section 38Mm X 25Mm ( Is: 7138 Erw Tube, 38Mm X 25Mm X 16Bg ) With The Base Plate Of The Ms Plate Of 35X22x5mm, Wire Management - Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Wires Runs Through The System From Bottom Tile And Extended To The Top At Various Locations By The Help Of 2 Nos. Vertical Cable Ducts In Each Panels. Cable Duct Shall Be Made From 0.8 Mm Thick M.S. Crca Grade D As Per Is: 513 - 1994. It Is Constructed With Two Parts, One Is Body & Another Is Cover. It Holds The Cables & Gives Aesthetic Appearance By Covering All Cables Entry, Which Are Moving Upward To The Panels. Size Of Cable Duct Is 107Mm W X 154 Mm H X 21 Mm D.Legs - System 2 Providing and placing in position of Mid Back Mesh Chair. The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon & upholstered using net fabric with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with density =55+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer of thermoplastic elastomer. Armrest is made up of plastic injection moulded nylon with textured top. It shall have Front pivot synchro mechanism with following features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension adjustment, 4 position locking with antishock feature, seat/back tilting ration of 1:2. The lumber support consists of polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The height of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5 cm in height. All the dimensions will be as per the Original Manufacturers Specifications. Product Certification : IAQ Gold, Greenguard Gold, BIFMA Level 2, AIOTA. Company Certification : ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018. Complete as per approved sample and as per the direction of Engineer-In-charge. 4 3 Providing and placing in position of 3 seater sofa. The dimensions shall be W x H x D (cm) 192 x 88 x 64. The weight of the sofa shall be 44 Kg. The primary material of the sofa shall be made of Sheesham Wood with the upholstery material made of fabric in the knock down delivery condition. The seat height shall be 45 cm. Certification: the company should be certified with ISO 9001:2015, 14001:2015, 45001:2018, 50001:2018, AIOTA, Greenguard(UL) & BIFMA. The item should be complete as per the approved sample, certifications and as per the direction of Engineer-In-Charge. 1 4 Providing and placing in position of 1 seater sofa. The dimensions shall be W x H x D (cm) 86 x 88 x 64. The primary material of the sofa shall be made of Sheesham Wood with the upholstery material made of fabric in the knock down delivery condition. The seat height shall be 45 cm. Certification: the company should be certified with ISO 9001:2015, 14001:2015, 45001:2018, 50001:2018, AIOTA, Greenguard(UL) & BIFMA. The item should be complete as per the approved sample, certifications and as per the direction of Engineer-In-Charge. 2 5 Providing and placing in position of center table. The dimensions shall be W x H x D (cm) 119.9 x 45 x 59.9. The primary material of the sofa shall be made of Plywood which comes with the maximum load bearing capacity of 50 Kg. The coffee table comes with the knock down delivery condition with the net weight of 20 Kg. Certification: the company should be certified with ISO 9001:2015, 14001:2015, 45001:2018, 50001:2018, AIOTA, Greenguard(UL) & BIFMA. The item should be complete as per the approved sample, certifications and as per the direction of Engineer-In-Charge. 1 6 Providing and placing in position of corner table. The dimensions shall be W x H x D (cm) 59.9 x 48 x 59.9. The primary material of the sofa shall be made of Plywood which comes with the maximum load bearing capacity of 30 Kg. The coffee table comes with the knock down delivery condition with the net weight of 12 Kg. Certification: the company should be certified with ISO 9001:2015, 14001:2015, 45001:2018, 50001:2018, AIOTA, Greenguard(UL) & BIFMA. The item should be complete as per the approved sample, certifications and as per the direction of Engineer-In-Charge. Total Quantity : 13

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	30-10-2023			07-11-2023

Refer document

Refer document

INR 5 Lakhs /-