Kerala State Electricity Board-KSEB has published Laying Ht Ug Cable Interlinking From Kottakunnu To Mogar And Insertion Of 100 Kva Transformer, Under Electrical Section Kumbala. Submission Date for this Tender is 02-11-2023. Transformer Supply Tenders in Kasaragod Kerala. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavation of cable trench in all classes of soil and backfilling after laying of cable (excluding laying of cable).Excavation of cable trench in all classes of soil and backfilling after laying of cable (excluding laying of cable). |
| 2 | Laying HT XLPE UG cable (of sizes beyond 3x185 sqmm and upto and incl. 3x300 sqmm) as per specification excl. excavation and backfilling.Laying HT XLPE UG cable (of sizes beyond 3x185 sqmm and upto and incl. 3x300 sqmm) as per specification excl. excavation and backfilling. |
| 3 | HDD Charges (Drilling charges Rs1600/meter) including rental charges of HDD machine with modem sensing equipment,labour charges for surveying and drawing and HDPE pipe 110mm@Rs400per meterHDD Charges (Drilling charges Rs1600/meter) including rental charges of HDD machine with modem sensing equipment,labour charges for surveying and drawing and HDPE pipe 110mm@Rs400per meter |
| 4 | Supplying and providing printed plastic warning tape of 100 micron or higher size plastic tape 20cm width red coulored printed the letter \"KSEB 11 KV UG Cable\",below 30cm from ground levelSupplying and providing printed plastic warning tape of 100 micron or higher size plastic tape 20cm width red coulored printed the letter \"KSEB 11 KV UG Cable\",below 30cm from ground level |
| 5 | Additional rate for providing cement slab in place of country bricks whereever necessary for single circuitAdditional rate for providing cement slab in place of country bricks whereever necessary for single circuit |
| 6 | Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials. |
| 7 | Drilling hole of various sizes on existing Channel/Cross Arm.Drilling hole of various sizes on existing Channel/Cross Arm. |
| 8 | Providing Transformer fencing, using 50x50x6mm Angle iron, 40 x 6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundationProviding Transformer fencing, using 50x50x6mm Angle iron, 40 x 6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation |
| 9 | Providing yard metalling with 6mm & 40mm thick blue metal as specified after constructing a curb wall.Providing yard metalling with 6mm & 40mm thick blue metal as specified after constructing a curb wall. |
| 10 | Fitting one No. LT lightning arrestor in LT OH line and giving connections excluding earthing.Fitting one No. LT lightning arrestor in LT OH line and giving connections excluding earthing. |
| 11 | Fitting one set (3No.) 11kV DO Fuse and giving connection.Fitting one set (3No.) 11kV DO Fuse and giving connection. |
| 12 | Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit. |
| 13 | Stringing of one km 11kV line with ACSR Raccoon (3 conductors) incl. cutting and removing tree branches wherever necessary.Stringing of one km 11kV line with ACSR Raccoon (3 conductors) incl. cutting and removing tree branches wherever necessary. |
| 14 | Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials. |
| 15 | Doing one cable end termination on cables of sizes beyond 3x185 sqmm and upto and incl. 3x300 sq mm using the cable jointing kit supplied departmentally. |
| 16 | Mounting the cable ends of all sizes upto and incl. 3x300 sq mm with special type cable clamps incl. cost of extra materials if needed and giving necessary connections. |
| 17 | Erecting one 100kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation. |
| 18 | Transporting Transformers by hired vehicle upto 5km and upto 2 No. of 63 to 250kVA Transformers / RMUs excluding loading & unloading. |
| 19 | Fitting 5 channel cross arms, AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses. |
| 20 | Additional rate for providing one disc set on any type of HT pole for making cut point. |
| 21 | Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads. |
| 22 | Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle). |
| 23 | Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite. |
| 24 | Fitting one set AB switch and giving connection |
| 25 | Doing straight joint on cables of sizes beyond 3x185 sqmm and upto and incl. 3x300 sq mm using the cable jointing kit supplied departmentally as per specification. |
| 26 | Providing one Earth using earth pipe incl. digging & backfilling pit and supply of charcoal, salt, sand etc. |
| 27 | Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite. |
| 28 | Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading. |
| 29 | Insertion of one HT PSC pole in existing line incl. digging & backfilling pit, fitting cross arm, insulators, binding etc. |
| 30 | Additional rate for excavating trench on tarred/concrete surface of specified size. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
