Tender For Construction Of Public Toilets At Ignca, Regional Centre, Bengaluru; 1 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M Inwidth Or 10 Sqm On Plan ) , Including Dressing Of Sides And Ramming Ofbottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil Anddisposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. All Kinds Of Soil. 2 Half Brick Masonry With Common Burnt Clay F.P.S. ( Non Modular ) Bricksof Class Designation 7.5 In Foundations And Plinth In :Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) 3 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Classdesignation 7.5 In Foundation And Plinth In:Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) 4 Providing And Laying In Position Cement Concrete Of Specified Gradeexcluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level :-1:5:10 ( 1 Cement : 5 Coarse Sand ( Zone-Iii ) Derived From Naturalsources : 10 Graded Stone Aggregate 40 Mm Nominal Sizederived From Natural Sources ) 5 Cement Plaster ( In Coarse Sand ) 12 Mm Cement Plaster Of Mix : 1:4 ( 1 Cement: 4 Coarse Sand ) Sqm 6 15 Mm Cement Plaster 1:4 ( 1 Cement: 4 Coarse Sand ) 7 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming Tois: 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approvedmake, In All Colours, Shades Except Burgundy, Bottle Green, Black Ofany Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Stepsand Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shadecomplete. 8 Providing And Laying Antiskid Vitrified Floor Tiles In Different Sizes ( Thickness To Bespecified By The Manufacturer ) With Water Absorption Less Than 0.08%And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Jointing With Grey Cement Slurry @ 3.3 Kg / Sqm Including Grouting Thejoints With White Cement And Matching Pigments Etc., Complete.Size Of Tile 300X300 Mm 9 Providing And Fixingpolyvinyl Chloride ( Pvc ) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including Allpvc Plain & Brass Threaded Fittings, Including Fixing The Pipe Withclamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittingswith One Step Pvc Solvent Cement And Testing Of Joints Completeas Per Direction Of Engineer In Charge. 100 Mm Nominal Dia Pipes 10 Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including Allcpvc Plain & Brass Threaded Fittings, Including Fixing The Pipe Withclamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittingswith One Step Cpvc Solvent Cement And Testing Of Joints Completeas Per Direction Of Engineer In Charge.20 Mm Nominal Dia Pipes 11 15 Mm Nominal Dia Pipe 12 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyserpoints Of Approved Quality Conforming To Is:8931 15Mm Nominal Bore 13 Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Qualityconforming To Is Standards And Weighing Not Less Than 690 Gms. 15 Mm Nominal Bore 14 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is :2202 ( Part I ) Non-Decorative Type, Core Of Block Board Construction Withframe Of 1St Class Hard Wood And Well Matched Commercial 3 Plyveneering With Vertical Grains Or Cross Bands And Face Veneers On Bothfaces Of Shutters: 35 Mm Thick Including Isi Marked Stainless Steel Butt Hingeswith Necessary Screws 15 Providing And Fixing Water Closet Squatting Pan ( Indian Type W.C.Pan ) With 100 Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level Whitep.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlleddevice ( Handle Lever ) Conforming To Is : 7231, With All Fittings Andfixtures Complete, Including Cutting And Making Good The Walls Andfloors Wherever Required:17.1.1 White Vitreous China Orissa Pattern W.C. Pan Of Size580x440 Mm With Integral Type Foot Rests. 16 Providing And Fixing White Vitreous China Extended Wall Mountingwater Closet Of Size 780X370x690 Mm Of Approved Shape Includingproviding & Fixing White Vitreous China Cistern With Dual Flush Fitting, Of Flushing Capacity 3 Litre / 6 Litre ( Adjustable To 4 Litre / 8 Litres ) , Including Seat Cover, And Cistern Fittings, Nuts, Bolts And Gasket Etccomplete. 17 Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Ofsize 580X380x350 Mm With White Pvc Automatic Flushing Cistern, With Fittings, Standard Size C.P. Brass Flush Pipe, Spreaders Withunions And Clamps ( All In C.P. Brass ) With Waste Fitting As Per Is :2556, C.I. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fittings And Cutting And Making Good The Wallsand Floors Wherever Required :Range Of Three Half Stall Urinals With 10 Litre P.V.C.Automatic Flushing Cistern. 18 Providing And Fixing Corner Type Wash Basin With C.I. Brackets, 15 Mm C.P. Brasspillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Includingpainting Of Fittings And Brackets, Cutting And Making Good The Wallswherever Require:White Vitreous China Wash Basin Size 630X450 Mmwith A Pair Of 15 Mm C.P. Brass Pillar Taps 19 Providing And Applying White Cement Based Putty Of Average Thickness1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wallsurface To Prepare The Surface Even And Smooth Complete. 20 Distempering With Oil Bound Washable Distemper Of Approved Brandand Manufacture To Give An Even Shade : New Work ( Two Or More Coats ) Over And Including Waterthinnable Priming Coat With Cement Primer 21 Finishing Walls With Water Proofing Cement Paint Of Required Shade :13.44.1 New Work ( Two Or More Coats Applied @ 3.84 Kg / 10 Sqm ) Sqm 97.60 22 Cement Concrete Flooring 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Gradedstone Aggregate ) Finished With A Floating Coat Of Neat Cement, Includingcement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 40 Mm Thick With 20 Mm Nominal Size Stone Aggregate 23 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) : For Fixed Portionpowder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) 24 For Shutters Of Doors, Windows & Ventilators Includingproviding And Fixing Hinges / Pivots And Making Provisionfor Fixing Of Fittings Wherever Required Including The Costof Epdm Rubber / Neoprene Gasket Required ( Fittingsshall Be Paid For Separately ) 25 Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flatpressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade L Type Ll, In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineerin- Chargepre-Laminated Particle Board With Decorative Lamination On Both Sides 26 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge .With Float Glass Panes Of 8 Mm Thickness ( Weight Notless Than 20 Kg / Sqm ) Sqm 27 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete :250X10 Mm 28 Providing And Fixing Brass 100Mm Mortice Latch And Lock With 6Levers Without Pair Of Handles ( Best Make Of Approved Quality ) Foraluminium Doors Including Necessary Cutting And Making Good Etc.Complete. Each 29 Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper 30 Providing And Fixing Aluminium Die Cast Body Tubular Type Universalhydraulic Door Closer ( Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700 Mm ) , With Necessary Accessories And Screws Etc. Complete. 31 Providing And Fixing Aluminium Round Shape Handle Of Outer Dia 100Mm With Ss Screws Etc. Complete As Per Direction Of Engineer-Inchargepowder Coated Minimum Thickness 50 Micron Aluminium 32 Providing And Fixing Precoated Galvanised Iron Profile Sheets ( Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge ) 0.50 Mm ( + 0.05 % ) Total Coated Thickness With Zinc Coating 120Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Micronsepoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18Microns. Sheet Should Have Protective Guard Film Of 25 Micronsminimum To Avoid Scratches During Transportation And Should Besupplied In Single Length Upto 12 Metre Or As Desired By Engineerin-Charge. The Sheet Shall Be Fixed Using Self Drilling / Self Tappingscrews Of Size ( 5.5X 55 Mm ) With Epdm Seal, Complete Upto Anypitch In Horizontal / Vertical Or Curved Surfaces, Excluding The Cost Ofpurlins, Rafters And Trusses And Including Cutting To Size And Shapewherever Required. 33 Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubesetc. ) Trusses Etc., Including Cutting, Hoisting, Fixing In Position Andapplying A Priming Coat Of Approved Steel Primer, Including Welding Andbolted With Special Shaped Washers Etc. Complete.Hot Finished Seamless Type Tubes 34 Providing And Fixing M.S. Tubular Frames For Doors, Windows, Ventilatorsand Cupboard With Rectangular / L-Type Sections, Made Of 1.60 Mm Thickm.S. Sheet, Joints Mitred, Welded And Grinded Finish, With Profiles Ofrequired Size, Including Fixing Of Necessary Butt Hinges And Screws Andapplying A Priming Coat Of Approved Steel Primer.10.15.1 Fixing With 15X3 Mm Lugs 10 Cm Long Embedded In Cementconcrete Block 15X10x10 Cm Of C.C. 1:3:6 ( 1 Cement : 3 Coarsesand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) Kg 146.55 35 Providing And Fixing 15 Mm Thick Densified Tegular Edged Eco Friendly Light Weight Calcium Silicate False Ceiling Tiles Of Approved Texture Of Size 595 X 595 Mm In True Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanised Steel Sections ( Galvanising @ 120 Grams Per Sqm Including Both Side ) Consisting Of Main ‘T’ Runner Suitably Spaced At Joints To Get Required Length And Of Size24x38 Mm Made From 0.33 Mm Thick ( Minimum ) Sheet, Spaced 1200 Mm Centre To Centre, And Cross “T” Of Size 24X28 Mm Made Out Of 0.33 Mm ( Minimum ) Sheet, 1200 Mm Long Spaced Between Main’T’ At 600 Mm Centre To Centre To Form A Grid Of 1200X600 Mm And Secondary Cross ‘T’ Of Length 600 Mm And Size 24 X28 Mmmade Of 0.33 Mm Thick ( Minimum ) Sheet To Be Inter Locked At Middle Of The 1200X 600 Mm Panel To From Grid Of Size 600X600 Mm, Resting On Periphery Walls / Partitions On A Perimeter Wall Angle Pre-Coated Steel Of Size ( 24X24x3000 Mm Made Of 0.40 Mm Thick ( Minimum ) Sheet With The Help Of Rawl Plugs At 450 Mm Centre To Centre With 25 Mm Long Dry Wall Screws @ 230 Mm Interval And Laying 15 Mm Thick Densified Edges Calicum Silicate Ceiling Tiles Of Approved Texture In The Grid, Including, Cutting / Making Opening For Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc., Wherever Required. Main ‘T’ Runners To Be Suspended From Ceiling Using G.I. Slotted Cleats Of Size 25X35x1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm G.I. Adjustable Rods With Galvanised Steel Level Clips Of Size 85 X 30 X 0.8 Mm, Spaced At 1200 Mm Centre To Centre Along Main ‘T’, Bottom Exposed With 24 Mm Of All Tsections Shall Be Pre-Painted With Polyster Baked Paint, For All Heights, As Per Specifications, Drawings And As Directed Byengineer-In-Charge. 36 Providing And Laying App ( Atactic Polypropylene Polymer ) Modifiedprefabricated Five Layer, 3 Mm Thick Water Proofing Membrane, Blackfinished Reinforced With Glass Fibre Matt Consisting Of A Coat Of Bitumenprimer For Bitumen Membrane @ 0.40 Litre / Sqm By The Samemembrane Manufactured Of Density At 25°C, 0.87 - 0.89 Kg / Litre Andviscocity 70 - 160 Cps. Over The Primer Coat The Layer Of Membraneshall Be Laid Using Butane Torch And Sealing All Joints Etc., Andpreparing The Surface Complete. The Vital Physical And Chemicalparameters Of The Membrane Shall Be As Under : Joint Strength Inlongitudinal And Transverse Direction At 23°C As 350 / 300 N / 5 Cm.Tear Strength In Longitudinal And Transverse Direction As 60 / 80N.Softening Point Of Membrane Not Less Than 150°C. Cold Flexibilityshall Be Upto -2°C When Tested In Accordance With Astm, D - 5147.The Laying Of Membrane Shall Be Got Done Through The Authorisedapplicator Of The Manufacturer Of Membrane : 3 Mm Thick 37 Painting With Synthetic Enamel Paint Of Approved Brand Andmanufacture To Give An Even Shade : Two Or More Coats On New Work. 38 Electrical Points: Wire Shall Be Used 1.5 Mm For 5 Amp, 2.5 Mm For 15 Amp & 4Mm For Main Conection Upto Db, The Quantity Required As Per No Of Fittings.Electrical Fittings- 4 Led Tubelight, 2Nos 5 Amp Points, 2 Nos 300 Mm Ms Exhaust Fan ( As Approved By Engg Incharge ) Are To Be Supplied & Providedmake- Wire- Polycab, Havells, Fittings& Fixtures- Crabtree, Havells, Syska, Philips, Crompton
