|
| 1 | AGGREGATE IMPACT TESTING MACHINEComplete with a cylindrical cup, 102 mm dia X 50 mm depth, one measure 75 mm dia X 50 mm deep and a tamping rod of circular cross section 10 mm in diameter and 230 mm long, rounded at one end. AS PER IS: 2386 (Part - IV)/ IS 9377 |
| 2 | AGGREGATE CRUSHING VALUE TEST APPARATUS-15CM WITH MEASURING CYLINDERApparatus consists of M S Cylindrical container 150mm+-0.5mm dia x130mm to 140 mm high, with base plate 200 to 230mm squarex 6mm thick , A plunger of 148 mm+-0.5mm dia X100 to 115mm high, supplied complete with tamping rod 16mm diaX 600mm long , one end rounded |
| 3 | RIFFLE SAMPLE DIVIDER - G.I. - 12.5MM - NO. OF SLOT : 16 . Used for rapid collection of the true representative sample from aggregate, sand and fillers. Consist of a metal box fitted with a series of chutes of equal width which discharge the material alternatively in opposite directions into separate pans. The chutes of the riffle are steep enough to allow rapid flowing of the material. Each riffle sample divider supplied with two pans and one scoop. |
| 4 | DESICCATOR - BOROSILICATE GLASS - VACUUM 200 MM |
| 5 | LABORATORY CBR APPARATUS - ELECTRIC OPERATED WITH 10 KN PROVING RINGThe machine feature a rigid two column frame with upper crossbeam, which can be adjusted in height and locked in position with locknuts. The drive force is provided by a mechanical jack housed in the base cabinet which also accommodates the motor and the electric panel. Complete with standard accessories as mentioned below. As per IS:2720 (Part XVI)Supplied complete with following accessories: 1 No each:• Load frame, motorized 5000 Kg (50 kn) capacity, with single rate of travel 1.25mm/min • C.B.R. Mould, 150 mm diameter x 175 mm high with extension collar & perforated base plate. Made of Mild steel. : 1 No• Penetration Piston, face diameter 50 mm with adjustable bracket.: 1 No• Perforated plate, 148 mm diameter with adjustable stem and lock nut-gunmetal : 1 No • Displacer block, 148 mm diameter x 47.7 mm high with detachable handle.: 1 No • Annular metal weight, 2.5 kg, 147 mm diameter with 53 mm diameter central hole.: 1 No • Slotted metal weight, 2.5 kg, 147 mm diameter with 53 mm diameter slot.: 1 No • Metal tripod stand for dial gauges.:1 No • Rammer 2.6 kg weight with a drop of 310 mm : 1 No• Rammer 4.89 kg with weight with a drop of 450 mm: 1 No • High sensitivity proving ring, 10 KN capacity fitted with 0.002 mm dial gauge in a nice teakwood case. : 1 No • Dial gauge 0.01mm x 25mm / 30mm travel : 1 No. |
| 6 | BITUMEN EXTRACTOR - MOTORISED WITH VARIABLE SPEED WITH DIGITAL RPM INDICATORSPECIAL MODEL WITH AC MOTOR AND DRIVE : This model facilitates precise speed control and vibration free smooth operation. Speed variation up to 3600 RPM. Complies with following International Standards - ASTM D 2172, AASHTO T 58, T 164. |
| 7 | TRICHLOROETHYLENE 8 Litre |
| 8 | . Filter Paper FOR EXTRACTOR TEST 24 CM DIA PKT OF 100 CIRCLES( set of 2 packets) |
| 9 | MARSH CONE FUNNEL - PLASTIC FOR BENTONITE VISCOSITY WITH MEASURING JUG AND STANDThis test can be performed in the laboratory, or used in the field to assess the apparent viscosity of a clay slurry for quality control purposes. The most commonly used slurry is a bentonite clay slurry. Made of Virgin Plastic. As per ASTM D 6910 |
| 10 | Plastic cube mould size 150x150x150 mm weight :1.12 kg as per IS specification 10086-2021(set of 6nos) |
| 11 | Coupled Air Compressor (Vaccum pump) capacity 50 litre, 1.5 HP, 180 LPM, 4CFM |
