}

Under Power Distribution Division-Iii, Meerut, System Improvement Plan In The Year 2023-24 (40 Crores), Capacity Increase Of Distribution Transformers At Various Places On Semi Turnkey Basis, Installation Of New Distribution Transformers, Construction Of , pallavpuram-Uttar Pradesh

Paschimanchal Vidyut Vitran Nigam Limited has published Under Power Distribution Division-Iii, Meerut, System Improvement Plan In The Year 2023-24 (40 Crores), Capacity Increase Of Distribution Transformers At Various Places On Semi Turnkey Basis, Installation Of New Distribution Transformers, Construction Of . Submission Date for this Tender is 16-10-2023. Electrification Work Tenders in pallavpuram Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

40064959
Corrigendum : Under Power Distribution Division-Iii, Meerut, System Improvement Plan In The Year 2023-24 (40 Crores), Capacity Increase Of Distribution Transformers At Various Places On Semi Turnkey Basis, Installation Of New Distribution Transformers, Construction Of
Open Tender
Indian
Uttar Pradesh
Pallavpuram
16-10-2023

Tender Details

Under Power Distribution Division-Iii, Meerut, System Improvement Plan In The Year 2023-24 ( 40 Crores ) , Capacity Increase Of Distribution Transformers At Various Places On Semi Turnkey Basis, Installation Of New Distribution Transformers, Construction Of New Lt Line, 11 Work Related To Construction, Separation And Strengthening Of Kv Line.= 1 Carriage Of Following Material From Store Center To Site Of Work Including Loading & Unloading At Both Ends Maximum Distance Up To 60 Km. :- 2 Pcc Pole 8.5 Mtr. Long 3 Stp Pole 11 Mtr. Long. 4 T / F 100 Kva 5 250 Kva T / F 6 Pvcxlpe Cable 1*250 Sqmm 7 Lt Abc Conductor 3*95 / 3*120 Sqmm 8 Line Material Such As 11 Kv Disc Insulator , 11 Kv Pin Insulator, 11 Kv Cross Arms , Joiniting Kit , Stone Pad, Gi Wire 9 Errection Pcc Pole 8.5 Mtr Long After Digging A Pit Of Size 1.6 Mtr Deep In All Type Of Soil Including Grouting ( 1:4:8 ) Of The Pole With Proper Ramming After Completion Of Work. 10 Errection Stp Pole 11 Mtr Long After Digging A Pit Of Size 1.6 Mtr Deep In All Type Of Soil Including Grouting ( 1:4:8 ) Of The Pole With Proper Ramming After Completion Of Work. 11 Fabrication And Fixing Of All 11 Kv Ht / Lt Line Accessories. 12 Fabrication And Fixing Of Ms Angle And Ms Channel, Fixing All 11 Kv Accessories Tpmo, Fuse Set 11 Kv Pin Insulators On D / P Pole. 13 Mounting Of 100 Kva T / F With Proper Jumpering Of Ht Side And Fixing Of Cable On Lt Side Of T / F. 14 Mounting Of 250 Kva T / F With Proper Jumpering Of Ht Side And Fixing Of Cable On Lt Side Of T / F. 15 Making A Section Pole To Exist Pole After Fabrication & Fixing Of T Channel Fixing Of All 11 Kv Accessories. 16 Erection Of Stay Rod Complete After Digging A Pit Of Size 1.6 Mtr Deep And Grouting The Same In Block Of Size 0.60 X 0.60 X 0.30 Mtr And Nuzzling At The Both Ends And Filling The Pit With Excavated Earth Soil With Proper Ramming. 17 Laying Lifting Stringing & Proper Sagging Of Acsr Weasel Conductor For 3 Phase, 3 Wire 11 Kv Line Including Binding & Jumpering Properly. 18 Laying Oflt Ab Cable Of Various Size Including Fixing Of Alllt Ab Accessories On Support 3*95 / 3*120 Sqmm 19 Fixing Of Distribution Box Including Fixing The Cable From Transformar And Consumer Service Cable 20 Providing And Fixing Of Water Level Earthing Of Each 11 Kv Line Pole & T / F Properly After Drive Of Electrodes If Size 20Mm X 250 Mm And Connection The Earthing Point With Gi Wire. 21 Providing And Fixing Of Tail Less Unit Of Each Mounted T / F 22 Making Of Plinth For 250 Kva T / F 23 Guarding Of Line With G.I Wire Having 2 No. Horizontal Wire & 3 Mtr Distance Of Swg G.I Wire After Fabrication Of Guard Cross Arms Of & Fixing The Same In Supports. 24 Providing & Fixing Ms Nut Bolt, 25 Provding & Fixing Holding Clamp 26 Provding & Fixing Suspension Clamp 27 Provding & Fixing Dead &Clamp 28 Provding & Fixing J Huck 29 Provding & Fixing Pircing Clamp 30 Provding & Fixingtop Channel 100*50*6 Sqmm 31 Provding & Fixingdropper Channel 100*50*6 Sqmm 32 Provding & Fixingms Angle 65*65*6 Sqmm 33 Provding & Fixingms Earthing Rod 20 Mm 34 Fencing Of 250 Kva Tf 35 Provding & Fixinglt Lugs For 250 & 400 Kva Tf

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 10-10-2023 ET NO. 116/EDC-MT/2023-2024 Date 16-10-2023

Key Value

Document Fees
INR 1180 /-
EMD
INR 9000.0 /-
Tender Value
INR 9 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail