New Gram Panchayat Building Decoration Prodhan Upprodhan Room Civil Work- 1 Dismantling All Types Of Masonry Excepting Cement Concrete Plain Or Reinforced, Stacking Serviceable Materials At Site And Removing Rubbish As Directed Within A Lead Of 75 Ma ) In Ground Floor Including Roof 2 Brick Work With 1St Class Bricks In Cement Mortar ( 1:6 ) ( A ) In Foundation And Plinth 3 M.F. Suspended Ceiling Made With 12.5 Mm Thick Gypsum Plaster Board Including G.I. Perimeter Channel Of 0.55 Mm Flush ( Having Two Flanges 20 Mm And 30 Mm Respectively And Web 27 Mm ) Along With Perimeter Of Ceiling With G.I. Intermediate Channel Of 0.9 Mm Thick Size 45 Mmx15mm Placed At 750 Mm C / C With G.I. Ceiling Angle Of Size 25 Mmx10mmx0.55 Mm Thick Fixed To The Ceiling With G.I. Cleat And Steel Expansion Fastener Ceiling Section 0.55 Mm Thick Of Size 51.50 Mmx26mm Fixed To The Intermediate Channels With The Help Of Connecting Clip And In The Direction Of Perpendicular To The Intermediate Channel Of 300 Mm C / C 12.5 Mm Thick Gypsum Plastered Board Are To Be Fixed Under Ceiling Section As Above By Machine Screws. The Boards Are To Be Joined And Finished With Jointing Compound, Paper Tape And Application Of Top Coat Etc. As Per The Direction Of Engineer-In-Charge. ( The Rate Includes Of Cost Of All Materials Including Taxes, Cost Of Accessories, Fittings And Fixtures, Scaffolding And Labour Charges Etc. Complete ) In Ground Floor 4 Plaster ( To Wall, Floor, Ceiling Etc. ) With Sand And Cement Mortar Including Rounding Off Or Chamfering Corners As Directed And Raking Out Joints Including Throating, Nosing And Drip Course, Scaffolding / Staging Where Necessary ( Groundfloor ) . [ Excludingcost Of Chipping Over Concrete Surface ] With 1:4 Cement Mortar ( A ) 20 Mm Thick Plaster 5 Rendering The Surface Of Walls And Ceiling With White Cement Basewater Proof Wall Putty Of Approved Make & Brand. ( 1.5 Mm Thick ) 6 Applying Interior Grade Acrylic Primer Of Approved Quality And Brand On Plastered Or Cencrete Surface Old Or New Surface To Receive Distemper / Acrylic Emulsion Paint Including Scraping And Preparing The Surface Throughly, Complete As Per ManufacturerS Specification Andas Per Direction Of The Eic. ( In Ground Floor ) B ) Two Coatsi ) Water Based Interior Grade Acrylic Primer 7 Acrylic Distemper To Interior Wall, Ceiling With A Coat Of Solvent Based Interior Grade Acrylic Primer ( As Per ManufacturerS Specification ) Including Cleaning And Smoothning Of Surface. Two Coat 8 Priming One Coat On Steel Or Other Metal Surface With Synthetic Oilbound Primer Of Approved Quality Including Smoothening Surfaces By Sand Papering Etc 9 Painting With Best Quality Synthetic Enamel Paint Of Approved Makeand Brand Including Smoothening Surface By Sand Papering Etc. Including Using Of Approved Putty Etc. On The Surface, If Necessary 10 Wood Work In Door And Window Frame Fitted And Fixed In Position Complete Including A Protective Coat Of Painting At The Contact Surface Of The Frame Exluding Cost Of Concrete, Iron Butt Hinges And M.S Clampslocal Sal 11 Supplying Solid Flush Type Doors Of Deluxe Decorative ( Both Side ) Quality, Conforming To I:S 2202 Timber Frame Consisting Of Top And Bottom Rail And Sidestyles Of Well Seasoned Timber 65Mm Wide Each And The Entire Frame Fitted With27.5Mm Wide Battens Places Both Ways In Order To Made The Door Of Solid Coreand Internal Lipping With Teak, Mahogony Or Rose Wood Approved Decorativeveneers Using Phenol Formaldehyde As Glue Etc. Complete, Including Fitting, Fixingthe Shutters In Position But Excluding The Cost Of Hinges And Other Fittings Inground Floor35 Mm Thick Shutter 12 Supplying Solid Flush Type Doors Of Commercial Quality, The Timber Frame Consisting Of Top And Bottom Rails And Side Styles Of Well Seasoned Timber 65Mmwide Each And The Entire Frame Fitted With 37.5Mm Wide Battens Places Both Ways In Order To Make The Door Of Solid Core And Internal Lipping With Garjan Or Similar Wood Veneers Using Phenol Formaldehyde As Glue Etc. Complete, Includingfitting, Fixing Shutters In Position But Excluding The Cost Of Hinges And Other Fittings In Ground Floor ( B ) 32 Mm Thick Shutters ( Single Leaf ) . 13 Iron Butt Hinges Of Approved Quality Fitted And Fixed With Steel Screws, With Isi Mark. ( I ) 100Mm. X 58Mm. X 1.90Mm 14 Hydraulic Door Closer Of Approved Quality As Per I.S.I. Standard Fitted And Fixed ( B ) Medium ( I.S.I. Size 2 ) Complete 15 Supplying Of Door Stopper ( Anodised Aluminium ) 16 Supplying 6 Levers Godrej Crystal Satine Mortice Lock With Keys Including Fitting & Fixing Complete. 17 Supplying Profiles Of Required Section Made Of Aluminium Alloyextrusions Conforming To Is: 732-1983 And Is: 1285- 1975; Annodized ( With Required Film Thickness And Specified Colour / Natural ) Matt Finishedconforming To Is: 1868-1983 For Fabrication Of Composit Door, Sliding &Casement Windows, Partitions, Formed Of Basic Sections Of Any Isiembossed / Certified Make And Brand As Per Direction Of Engineer - In Charge. ( Payment Will Be Made On Finished Length Of The Work ) . 18 Labour Charge For Fabrication And Installation Of Composite Door, Window, Partitions Made From Annodized Extruded Alloy Aluminium Sections For The Following Units:- ( A ) Glazed Aluminium Sliding Windows Made Of Extruded And Annodized Alloy Aluminium Sectios, Fabrications, Including Cutting To Proper Shape And Size, Drilling And Aligning Of Window Shutter Frame Fitted With In Built Locking Arrangements, Sliding Rollers And Other Necessary Fittings, Fixture, Adhesives And Joineries Along With Extruded Neoprine Or Epdm Gasketing In Between Window Frame And Masonry Work ( Walls, Column, Beam.Lintels Etc. ) As Well As Between Glass And Shutter Frame For Fixing Glass And Polysulphide Sealant And In Between Shutter And Window Frame Where Necessary Including Cutting To Requisite Size And Fixing Glass As Per Drawing, Specification And Direction Of Eic. The Rate Includes The Hire Charge Of All Tools And Plants, Including All Incidental Charges, Adhesive, Joineries Such As Screw, Cleat Angle Etc. But Excluding The Cost Of Extruded Aluminium Sections, Glass, Neoprene / Epdm Gasket, Locking Arrangement And Rollers. 19 Supplying Pvc Rollers For Sliding Windows As Per Direction Of Engineer In Charge. 20 Supplying Maruti Lock ( 100Mm ) 21 Supplying Epdm Gusket Of Approved Make And Brand As Per Direction Of Engineer In Charge. I ) For Sliding Windows 22 Supplying Bubble Free Float Glass Of Approved Make And Brandconforming To Is: 2835-1987. 23 Name Plate ( Wall Painting + Marble ) ( Including Photos Of Work ) 24 Add Gst ( Goods And Services Taxes ) @ 12.00% ( 50% Wb Gst& 50% Central ) Over The Above Total [ Marked As A ] Asper The Rules Of The Govt.Of India…. 25 Add For Labour Well Fare Cess @ 1.00%
