|
| 1 | Taking down carefully aluminium/ copper point wiring (light, fan, socket, power point) including batten, conduit and fittings such as switches, ceiling rose, sockets, brackets, light fittings, switch board etc removing, making good distrubed surfaces of wall, floor, ceiling etc complete all as specified and directed. |
| 2 | M&L for point wiringwith 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor (FRLS) 1100 Volts grade cable (red colour cable to be used for phase connection and black colour cable to be used for neutral connection) including PVC casing capping with all accessories including 1.5 sqmm copper multistrand conductor (FRLS) 1100 Volts grade unsheathed PVC insulated (green colour) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet for mounting of fittings like switch, socket and fan regulator with 3 mm thick hylum laminated sheet cover complete all as specified and directed for the following:- |
| 3 | Light/ Fan/ Bell point controlled by one switch |
| 4 | 5 Amp switch, socket on same board |
| 5 | 5 Amp switch, socket on Independent Board. |
| 6 | All as per item No 2 here in before but 2.5 sqmm P.V.C insulated unsheathed cable with stranded copper conductor for 6 pin, 6/16 Amp switch socket combination on independent board. |
| 7 | M&L for point wiring with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor (FRLS) 1100 Volts grade cable (red colour cable to be used for phase connection and black colour cable to be used for neutral connection) including PVC concealed conduit medium grade with all accessories including 1.5 sqmm copper multistrand conductor (FRLS) 1100 Volts grade unsheathed PVC insulated (green colour) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet for mounting of fittings like switch, socket and fan regulator with 3 mm thick hylum laminated sheet cover incl cutting chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for the following:- ( Note: Cutting and chasing deemed to be included in coated rate. ) |
| 8 | Light/ Fan/ Bell point controlled by one switch |
| 9 | 5 amp socket on same boared |
| 10 | 5 Amp switch socket on Independent Board. |
| 11 | All as per item No 4 here in before but 2.5 sqmm P.V.C insulated unsheathed cable with stranded copper conductor for 6 pin, 6/16 Amp switch socket combination on independent board. |
| 12 | S&F socket 3 pin, 5 Amps piano flush type 230/240 V complete all as specified and directed. ( For same board) |
| 13 | S&F switch socket combination 5/6 Amps piano flush type 230/240 V complete all as specified and directed. ( For independent board). |
| 14 | S&F switch socket combination 3 pin, 15/16 Amps piano flush type 230/240 V complete all as specified and directed. |
| 15 | S&F ceiling rose 3 terminal/ PVC/ polycarbonate, isolated body, surface type complete all as specified and directed. |
| 16 | S&F step type electronic fan regulator piano flush type230 volt, speed control and connecting up and fix position complete all as specified and directed. |
| 17 | S&F switch piano flush type 5/6 amps, 240 volt, single pole, one way complete all as specified and directed. |
| 18 | S&F bell push piano flush type, 5/6 amps, 240 volt, single pole complete all as specified and directed. |
| 19 | S&F buzzer/ ding dong bell, AC 230 volt, single pole complete all as specified and directed. |
| 20 | S&F in repair of wall decorative ultra slim LED 18/20 Watt, 230 volts, 50 Hz, 4 feet, lighting fixture with extruded polycarbonate lighting fixture, environmental friendly, energy efficient ready to use pack including lamp complete all as specified and directed. |
| 21 | S&F in repair of ultra slim LED batten 10 Watt, 230Volts, 50 Hz, decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly including lamp, connection wire all as specified and directed. |
| 22 | S&F in repair of surface mounted 36 Watt (clear white) LED panel light2x2 feet, 230 volts, 50 Hz with CRCA sheet housing precoated white colour and high quality diffuser for uniform light and high efficiency with separate replaceable electronic driver including lamp complete all specified and directed. |
| 23 | M&L in repair for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through & including PVC casing-caping medium grade complete all as specified and directed. |
| 24 | Supply and fixingin repair of factory made sheet metal enclosure for DBs double door, TPN, 415 volt,4 Way, IP-42 protection with bus bar, neutral link, earth link complete all as specified and directed. |
| 25 | Supply and fixing in repair of factory made sheet metal enclosure for DBs double door, SPN, 240 volt,8 Way, IP-42 protection with bus bar, neutral link, earth link complete all as specified and directed. |
| 26 | Supply and fixing in repair of factory made sheet metal enclosure for DBs double door, SPN, 240 volt,4 Way, IP-42 protection with bus bar, neutral link, earth link complete all as specified and directed. |
| 27 | Supply and fixingin repair of 240V, 10KA \"C\" curve miniature circuit breaker (MCB) SPN 32-40 Amp current carrying capacity complete with connection and testing all as specified and directed. |
| 28 | Supply and fixing in repair of 415V 10KA \"C\" curve miniature circuit breaker (MCB) TPN 63 Amps current carrying capacity complete with connection and testing all as specified and directed. |
| 29 | Supply and fixing in repair of 240V, 10KA \"C\" curve miniature circuit breaker (MCB) SP 10 to 32 Amp current carrying capacity complete with connection testing all as specified and directed. |
| 30 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed. |
| 31 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specifed and directed. |
| 32 | Supply and fix LED street light 45 W with minimum lumen of 4500Lm, PF >0.95 new generation energy saving and environmental friendly long life made up of pressure die cast aluminium housing with high power LED as lighting source cover having driver compartment with IP 66 protection and impact resistance with built-in surge protection device suitable for mounting for pole complete including taking down of old complete all as specified and diected.Make : Crompton/ Philips/ GE. |
| 33 | Supply and fix LED street light60 W with minimum lumen of 6000Lm, PF >0.95 new generation energy saving and environmental friendly long life made up of pressure die cast aluminium housing with high power LED as lighting source cover having driver compartment with IP66 protection and impact resistance with built-in surge protection device suitable for mounting for pole complete including taking down of old complete all as specified and diected.Make : Crompton/Philips/ GE. |
| 34 | Supply, installation, testing and commissioning factory made and tested AMF Panel 125 KVA with Byepass arrangement for Main & DG both Outdoor type, platform mounted, suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar with insulated sleeves Aluminium bus bars of 250 Amps rating. The panel shall be dust and vermin proof, protection class (IP-54) and made of 3.15 mm thick CRCA mild steel sheet and mild steel, Mounting Channel work made out of 75 mm ), front opening type with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FR wire of adequate size but not less than 1.5 sqmm complete. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey shade 7035. The scope of work also comprising of the following items:- ( Location :- \"S\" Unit ) Make of Panel: Adlec/ Schneider / Universal Switch Gear Control/ Tricolite. (i)Under Voltage relay 415V AC for main -1 No. (ii) Under voltage relay 415 V AC for DG - 1 No. (iii) AC Timer 230 Volt , 2 No. +2 NC - 1 No. (iv) DC Timer 12/24 V -1No. (v) Engine Start relay 12/ 24 V- 1 No. (vi) Control MCB SP 6 Amp.230 V – 9 Nos. (vii) Control MCB SP 16 Amp.230 V – 2 Nos. (viii) Battery Charger 12/24 DC with SMPS- 1 No. (ix) LED Indicating Light for Main & DG—6 Nos (x) LED Indicating Light for Main & Gen. ON – 2 Nos. (xi) LED Indicating Light for battery Charger –1 No. (xii) Digital Volt meter ( 0-500 V ) Flush Mounted 96 mm X 96 mm - 1 No. (xiii) Digital Amp meter ( 0-250 A ) Flush Mounted 96 mm X 96 mm - 1 No. Contd/- |
| 35 | (xiv) Volt Meter Selector switch 6 A - 1 No. (xv) Ampere Meter Selector switch 6 A - 1 No.(xvi) CT Coil 250 / 5 A - 3 Nos.(xvii) DC Volt Meter 15/30 V - 1 No.(xviii) DC Amp Meter0-15 A - 1 No.(xix) Trickle / Boost switch –2 Nos.(xx) Auto / Manual Switch ---1 No.(xxi) Start & Stop Push Button- 2 Nos.(xxii) Analogue Frequency Meter –1 No.(xxiii) Hooter 24 V DC - 1 No.(xxiv) Power Contactor 225 Amps 3 Pole having coil voltage 220 V AC for DG - 1 No.(xxv) Power Contactor 225 Amps 3 Pole having coil voltage 220 V AC for Main - 1 No.(xxvi) Incoming MCCB 250 A 25 KA 4 Pole Thermal Magnetic release for Main & DG Supply - 2 Nos.(xxvii) Control Relay - 1 Set. (xxviii) Over Load relay 3-5 A (xxix) Change Over Switch 250 A 4 Pole For Bye Pass Main Supply - 1 No.(xxx) Change Over Switch 250 A 4 Pole For Bye PassDG Supply - 1 No.(xxxi) Bus Bar 250 Amps. 3 Strips and Neutral 125 Amps. Aluminium - 1 Set. |
| 36 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and diected. |
| 37 | Attending day to day complaints related to joinery work such as repairs to cupboard, kitchen shelves, pelmet box, easing of doors and windows, kitchen knobs, tighting of wire mesh, glass, easing of door tightening door /window easing of door shutter etc including taking down of existing material as ordered/required on all working day to attend the complaint cell by rep of contractor at 0900 AM and report to complaint cell at every evening at 0500 PM on daily basis after satisfactory completion,complete all as specified and directed. Material such as nails,screws, washers, putty/beading for glass / wiremesh, nut & bolts etc as per site requirement shall be deemed to be included in the the quoted rate.Note:-(i)The above task shall be carried out by deploying Minimum 01 No Carpenter & 01 No Helper on daily basis. (ii) The complaint against docket shall be taken from MES Complaintcell at every morning at 0900 AM by rep of contractor on daily basis.(iii) Every docket will submit reprt at complaint cell on daily basis on same day at 0500 PM or early morning on next day after satisfacotry completion. (iv) Necessary T&P, equipment and safety gear shall be provided by the contractors.(v)Rs. 130.00/complaint shall be recovered against non attending of every complaints. (vi) Material will be measured and paid separatly under respective items as supply only.However quoted rate for fixing of the same shall be deemed to be included in this item. |
| 38 | Attending day to day complaints related to water supply & plumbing work only such as leakage of bib cock/pillar cock/ stop cock angle valve of any description changing the washers, cleaning of air lock in the pipe, leaking low level or high level flushing cistern by adjusting the float valve and including removal/taking down of existing material or for refixing of same or replacement of rubber washer in PVCsyphons/bath fittings and adjusting the float valve of over head tanks and leaking PVC bends/galvanised iron pipes etc as per site requirement on all working day to attend the complaint cell by rep of contractor at 0900AM and report to complaint cell at same day at 0500 PM on daily basis after satisfactory completion, complete all as specified and directed. Material such as threads, washers, lead, solvent cement to join PVC pipes etc shall be included in the quoted rate.Note :- (i) The above task shall be carried out by deploying Minimum 01 No Plumber & 01 No Helper on daily basis. (ii) The complaint against docket shall be taken from MES Complaint cell at every morning at 0900 AM by rep of contractor on daily basis. (iii) Every docket will submit report at complaint cell on daily basis on same day at 0500 PM or early morning on next day after satisfacotry completion. (iv) Necessary T&P, equipment and safety gear shall be provided by the contractors.(v)Rs. 130.00/complaint shall be recovered against non attending of every complaints. (vi) Material will be measured and paid separatly under respective items as supply only.However quoted rate for fixing of the same shall be deemed to be included in this item. |
| 39 | Attending day to day complaints related to masonary work only such as repairs to Brick / PCC Block Work, Plastering, Finishes, Flooring, PCC / RCC Repair Work, Hardstanding, Path etc including demolition & dismanteling as per site requirement on all working day to attend the complaint cell by rep of contractor at 0900AM and report to complaint cell at same day at 0500 PM on daily basis after satisfactory completion, complete all as specified and directed. Material such as spong etc shall be included in the quoted rate.Note :- (i) The above task shall be carried out by deploying Minimum 01 No Mason & 01 No Helper on daily basis. (ii) The complaint against docket shall be taken from MES Complaint cell at every morning at 0900 AM by rep of contractor on daily basis. (iii) Every docket will submitted at complaint cell on daily basis of same day at 0500 PM or early morning on next day after satisfacotry completion. (iv) Necessary T&P, equipment and safety gear shall be provided by the contractors.(v)Rs. 130.00/complaint shall be recovered against non attending of every complaints. (vi) Material will be measured and paid separatly under respective items as supply only.However quoted rate for fixing of the same shall be deemed to be included in this item. |
| 40 | Supply only 6 mm thick plywood, graded BWR, type BB. |
| 41 | Supply onlySteel Plate Rack of 600x 900 x 250 MM. |
| 42 | Supply only25 mm dia curtain rod, mild steel, powder coated decorative type. |
| 43 | Supply only25 mm dia decorative type brackets, mild steel, powder coated. |
| 44 | Supply only Galvanised steel wire cloth. 0.63 mm nominal dia of wire and average width of aperture 1.40mm. |
| 45 | Supply only 4 mm thick sheet glass ordinary quality, in square or reqd shape n exc 0.50 Sqm each. |
| 46 | Supply only 4 mm thick figured glass pin headed type in square or reqd shape n exc 0.50 Sqm each. |
| 47 | Supply only 150mm long Aluminium Anodised, Barrel tower bolts of extruded section. |
| 48 | Supply only 200mm long Aluminium Anodised, Barrel tower bolts of extruded section. |
| 49 | Supply only 300mm long Aluminium Anodised, Barrel tower bolts of extruded section. |
| 50 | Supply only 100mm long Aluminium Anodised, handel, caste type. |
| 51 | Supply only 150mm long Aluminium Anodised, handel, caste type. |
| 52 | Supply only 100mm Hasp and staple, safety type, aluminium anodisedwith mild steel hinge pin including bolt to hinge plate. |
| 53 | Supply only 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright powder coated. |
| 54 | Supply only 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy. |
| 55 | Supply only Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. |
| 56 | Supply only 100mm Butt hinges, medium weight, cold rolled mild steel. |
| 57 | Supply only 100mm size, Aluminium plate type-II Gate and shutter, hooks and eyes |
| 58 | Supply only Aluminium Anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges. |
| 59 | Supply only 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. |
| 60 | Supply only 16mm dia C-PVC pipes. |
| 61 | Supply only 20mm dia C-PVC pipes. |
| 62 | Supply only 25mm dia C-PVC pipes. |
| 63 | Supply only 20mm & under India rubber washers for bib tap / pillar taps etc. |
| 64 | Supply only Fancy Type Bib taps, chromium plated, cast copper alloy with crutch or butterfly handle |
| 65 | Supply only Fancy Type Pillar taps, chromium plated, cast copper alloy, with capstan heads. |
| 66 | Supply only Fancy Type Stop valves / Angle valve, chromium plated, cast copper alloy with crutch or butterfly handle. |
| 67 | Supply only Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook. |
| 68 | Supply only 15mm dia Gun-metal, globe or gate valves, with iron wheel head |
| 69 | Supply only 20mm Gun-metal, globe or gate valves, with iron wheel head |
| 70 | Supply only 25mm Gun-metal, globe or gate valves, with iron wheel head |
| 71 | Supply only 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball. (Minimum weight 20mm-210gms) |
| 72 | Supply only 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball. (Minimum weight 25mm-455gms) |
| 73 | Supply only Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. |
| 74 | Supply only 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets. |
| 75 | Supply only 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 76 | Supply only Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. |
| 77 | Supply only 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts. |
| 78 | Supply only 40mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts. |
| 79 | Supply only PVC connections 15mm size with PTMT nuts of length 600mm |
| 80 | Supply onlyCP Grating doom 125 mm dia(minimum wt 40grms). |
| 81 | Supply only water tank cover for tanks of size 500 ltr or 1000 ltrs capacity water storage tank. |
| 82 | Supply only 32mm dia PVC waste pipe (LDEP) for wash basin and kitchen sink / Urinals. |
| 83 | Supply only 40mm dia PVC waste pipe (LDEP) for wash basin and kitchen sink / Urinals. |
| 84 | Supply only\" flushing cistern kit\" for complete set to fitted inside as per requirement for cistern functional complete. |
| 85 | Supply only Spindle suitable for Bib Tap / Stop valve / Angle Cock / Pillar Tap. |
| 86 | Supply only 16mm C- PVC pipes fittings such as elboe, socket, Nipple, Tee & reducer etc. |
| 87 | Supply only 20mm C- PVC pipes fittings such as elboe, socket, Nipple, Tee & reducer etc. |
| 88 | Supply only 25mm C- PVC pipes fittings such as elboe, socket, Nipple, Tee & reducer etc. |
| 89 | Supply onlyOrdinary Portland Cement (43 Grade) or Portland Pozzolana Cement (43 Grade). |
| 90 | Supply onlyFine Aggregate (Sand). |
| 91 | Supply only 20mm Graded Coarse Aggregate. |
| 92 | Supply only 40mm Graded Coarse Aggregate. |
| 93 | Material and labour laying well burnt old sizebricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. |
