Regarding Running Tender For New Connection On Jhatpat Portalfull Deposit Work Scheme And Sansad Nidhi/Vidhayak Nidhi Depositwork In The Area Of Edsd-Iii, Sardhana Dehat Under Edd-Ii, Meerut, Under Edc-2 Meerut., Meerut-Uttar Pradesh

Regarding Running Tender For New Connection On Jhatpat Portalfull Deposit Work Scheme And Sansad Nidhi / Vidhayak Nidhi Depositwork In The Area Of Edsd-Iii, Sardhana Dehat Under Edd-Ii, Meerut, Under Edc-2 Meerut.- 1 Cartage Of Following Material From Store Center Meerut To Je Store Including Loading & Unloading At Both Ends Maximum Distance Up To 40 Km. :– 2 A ) Pcc Pole 8.5 Mrt Long / St Pole 11 Mtr Long. 3 Cartage Of Line Material From Store Centre To Dump Site & Then Dump Site To Site Of Work On Day To Day Basis, Including Loading & Unloading At Both Ends Maximum Distance Up To 20 Km. ( 15 Qtl. ) 4 Cartage Of 10 Kva To 100 Kva Transformer From Store Centre To Site Of Work Including Loading & Unloading At Both Site 5 Cartage Of Following Material From Je Store To Site Of Work Including Loading & Unloading At Both Ends Maximum Distance Up To 40 Km. :– A ) Pcc Pole 8.5 Mrt Long / St Pole 11 Mtr Long. 6 Dissmentling Of Damaged & Broken P.C.C. / S.T.Pole / R.S. Joist By Digging The Pits & Removel Of Complete H.T. / L.T. Line Accessories . 7 Eartingh Of Each 11 Kv Line Pople & T / F Properly After Drive Of Electrodes If Size 20Mmx250mm And Connection The Earthing Point With Gl Wire. 8 Erection Ofpcc Pole 8.5 Mtr Long / Stp Pole 11 Mrt Long After Digging A Pit Of Size 1.20 X 0.60 X 1.6 Mtr In All Type Of Soil Including Back Filling Of The Pole With Proper Ramming After Completion Of Work. 9 Fabrication And Fixing Of All 11 Kv H.T / L.T. Line Accessories. 10 Erection Of Double Pole On Pcc Pole 8.5 Mtr After Digging Of Pit Of Required Size Including Fabrication And Fixing Of Top Channel, Droper Channel & Base Channel Alongwith, Fixing All 11 Kv Accessories Tpmo, Fuse Set 11 Kv Pin Insulators And Making Connection Properly. 11 Mounting Of 10 To 100 Kva T / F With Proper Jumping Of Ht Side And Fixing Of Cable On Lt. Side Of T / F Making Connection Properly. 12 Making A Section Pole To Exist Pole After Fabrication & Fixing Of T Channel Fixing Of All 11 Kv Accessories. 13 Erection Of Stay Rod Complete After Digging A Pit Of Size 1.20 X 0.60 X 1.6 Mtr And Grouting The Same In Block Of Size 0.60 X 0.60 X 0.30 Mtr And Nuzzling At The Both Ends And Filling The Pit With Excavated Earth Soil With Proper Ramming. 14 Laying Lifting Stringing Of Proper Sagging Of Acsr Weasel Conductor For 3 Phase, 3 Wire 11 Kv Line Including Binding & Jumpering Properly. 15 Laying Lifting Stringing Of Proper Sagging Of Acsr Rabbit Conductor For 3 Phase, 3 Wire 11 Kv Line Including Binding & Jumpering Properly. 16 Laying Lifting & Sagging Of Lt Line With A.B.C Bunch Conductor Including Proper Binding & Jumpring:-A ) 3 Phase 4 Wire Line. 17 Grouting Of Pcc / St Poles With Dust, Cement & Stone Blast Concreting. 18 Cutting & Chopping Tree Branches Near Side Of Line For Making The Clearance Between Line And Tree ( Near About 100 Branches ) . 19 Fixing Of Lt Distribution Box Along With Providing Clamp Nut & Bolts 20 Providing And Fixing Stay Clamps . 21 Providing And Fixing F Clamp 22 Providing And Fixing Holding Clamp 23 Providing And Fixing Lt Clamps . 24 Providing And Fixing Ltinsulator Clamps . 25 Providing And Fixing Bolt And Nuts .

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	06-10-2023	T129/EDCII/MT/2023-24_dtext	Date	09-10-2023

INR 1180 /-

INR 2000.0 /-

INR 2 Lakhs /-