Tender For Modernization With Upgradation Of Ksfdc Kairali Sree Theatre Complex Thrissur,Supply And Installation Of Chairs,Sofas And Recliners., thrissur-Kerala

Modernization With Upgradation Of Ksfdc Kairali Sree Theatre Complex Thrissur, Supply And Installation Of Chairs, Sofas And Recliners. Modernization With Upgradation Of Ksfdc Kairali Sree Theatre Complex Thrissur, Supply And Installation Of Chairs, Sofas And Recliners. , Chairs, Sofas, Recliners , 22” C / C Chair Functional Specifications Back Frame: 780Mm X 430 / 460Mm Made With 20 X 20Mm 16 Swg Sq. Tube- Pu Injection Moulded Foam Of 27” X 19” Average 3.5” Thick With Head Rest & Lumbar Support Of 50-52 Kg / M3density, With Back Cover Of Injection Moulded Ppcp Tray. Frames Stripped With 22Swg Cr Sheet In Suitable Spacing And Shape To Support Pu Foam And All Metal Portion Powder Coated.Seat Frame: 460 X 430 Mm Made With 25Mm X 25Mm Sq. Pipe Of 18 Swg Pu Injection Moulded Foam Of 19” X 19” Average 4”-4.5” Thick Of 55-58 Kg / M3 Density, Bottom Side Covered With And Frames Stripped With 22Swg Sheet In Suitable Spacing And Topped With 3Mm Hard Board Tosupport Pu Foams And All Metal Portions Powdercoated.Sidestand:550Mm X 400 Mm Or Nearest Size Made Of 40Mm X 20 Mm 18 Swg Tube And 40Mm X 6Mm Ms Flat To Meet The Structural Requirements And Side Covered With 5Mm Thick Fabric Upholstery Board. For All Inside Legs Made Up To Half Portion And Every End Row Legshould Be Completely Covered With The Fabric Upholstery Board And Side Stand Powder Coated.Arm Rest:450Mm X 55Mm X 50Mm Or Nearest Size Made Up Of Injection Moulded Ppcp ( Poly Propylene Co Polymer ) With Cup Holder With Pu Moulded Foam Padding With Fabric Upholstery.Mechanism:Roller And Box Type, Roller Of 14Mm Nylon Casted Metal Roller And Box 2 Nos. Made Fabricated With 50Mm X 3Mm Thick Flats, 25Mm X 25Mm-18 Swg Pipe 2 Stays, Provided With Hydraulic Gas Springs / Coil Springs ( Optional ) And Of Enamel Paint Finished Or Lacquer Paint Finished.Upholstery:3Mm Foam Laminated Fabric Of Approved Shade Of Special Cloth Made For Theatre Seating. ( Water Repellent & Fire Retardant Optional ) Foundation Bolt:90 X 8Mm, Chemical Bonding With 2 Nos Each Per Leg.General: 1 ) All Seats Can Provide Logo Design With Emblem-Embroidery. ( Optional ) 2 ) Centre To Centre Of Chairs Will Be 56-58Cm ( Customised ) . 3 ) The Overall Height Of The Chair Should Be 106-110Cm According To The Level Of Vision At Site , 24” C / C Chair Functional Specification:Back Frame: 800Mm X 580Mm X 500Mm Made To Shape With 20Mm X20mm Of 1.45Mm Sq. Tube, Pu Foam Of 20Mm Topped Over Frame And Upholstery Filled With Recron Fibre Of Virgin Conjugated Hollow Siliconized Polyester Fibre 15Dn X 64Mm Cut Length Of Average 4” Thick With Head Rest & Lumbar Support With Upholstery Back Covering. Back Frames Stripped With 22 Swg Cr Sheet In Suitable Spacing And Shape To Support For Upholstery Work And All Metal Portion Powder Coated With Back Side Covered With 5Mm Board Upholstered. Seat Frame: 480Mm X 480Mm Made With 25Mm X 25Mm Pipe Of 18Swg Pu Foam Of Average 40 Mm Thick Of 32Kg / M3 Density And Upholstery Filled With Recron Fibre Of Virgin Conjugated Hollow Siliconized Polyester Fibre 15Dn X 64Mm Cut Length And Frames Stripped With 22 Swg Sheets In Suitable Spacing And Shape To Support The Upholstery And All Metal Portions Powder Coated. Side Stand: 580Mm X 480Mm Made To Shape Of 40Mm X 20Mm And 20Mm X 20Mm 18 Swg Tube And 6Mm Ms Flat To Meet The Structural Requirements And Side Covered With Fabric Upholstery Board. For All Inside Legs Up To Half Portion And Every End Row Leg Should Be Completely Covered With The Fabric Upholstery Board, Pvc Cup Holder And All Metal Parts Powder Coated. Mechanism:Roller And Box Type, Roller Of 14Mm Thick Nylon Casted Noise Free Treated Metal Roller And Box Made Fabricated With 50Mm X 3Mm Thick Flats, 25Mm Sq. 18 Swg Pipe 1 Stay, Provided With Coil Springs And Of Lacquer Paint Finished Or Powder Coated. Front Bottom Portion With 20Mm X20mm Pipe Frame Covered With Upholstery. Upholstery:3Mm Foam Laminated Fabric Of Approved Shade Of Special Cloth Made For Theatre Seating. ( Water Repellent & Fire Retardant Optional ) General: 1 ) All Seats Can Provide Logo Design With Emblem-Embroidery. ( Optional ) 2 ) Centre To Centre Of Chairs Will Be 60 Cm And Side Stands Of 12 Cm. 3 ) The Overall Height Of The Chair Is 110Cm. Foundation Bolt:90 X 8Mm, Chemical Bonding With 2 Nos Each Per Leg. , 26” C / C Push Back Sofa Functionalspecifications:Back Frame: 840Mm X 490Mm Made With 25 X 25Mm 18 Swg Tube, Pu Foam Of 20Mm Topped Over Frame And Upholstery Filled With Recron Fibre Of Virgin Conjugated Hollow Siliconized Polyester Fibre 15Dn X 64Mm Cut Length Of Average 5” Thick With Head Rest & Lumbar Support With Upholstery Back Covering. Back Frames Stripped With 22 Swg Cr Sheet In Suitable Spacing And Shape To Support For Upholstery Work And All Metal Portion Powder Coated. Seat Frame: 500Mm X 490Mm Made With 25Mm X 25Mm Pipe Of 18Swg Pu Foam Of Average 40 Mm Thick Of 32Kg / M3 Density And Upholstery Filled With Recron Fibre Of Virgin Conjugated Hollow Siliconized Polyester Fibre 15Dn X 64Mm Cut Length And Frames Stripped With Coil Springs 3 Numbers And Elastic Belts In Suitable Spacing And Shape To Support The Upholstery And All Metal Portions Powder Coated. Side Stand:600Mm X 620Mm Made Of 75Mm X 25Mm 18 Swg Tube And 6Mm Ms Flat To Meet The Structural Requirements And Side Covered With 3Mm Thick Fabric Upholstery Board. For All Inside Legs Up To Half Portion And Every End Row Leg Should Be Completely Covered With The Fabric Upholstery Board, Cup Holder And All Metal Parts Powder Coated. Mechanism:Roller And Box Type, Roller Of 14Mm Thick Nylon Casted Noise Free Treated Metal Roller And Box 2 Nos. Each Made Fabricated With 50Mm X 3Mm Thick Flats, 25Mm Sq. 18 Swg Pipe 2 Stays, Provided With Coil Springs / Hydraulic Gas Springs And Of Lacquer Paint Finished Or Powder Coated. Upholstery:3Mm Foam Laminated Fabric Of Approved Shade Of Special Cloth Made For Theatre Seating. ( Water Repellent & Fire Retardant Optional ) Foundation Bolt:90 X 8Mm, Chemical Bonding With 2 Nos Each Per Leg. General: 1 ) All Seats Can Provide Logo Design With Emblem-Embroidery. ( Optional ) 2 ) Centre To Centre Of Chairs Will Be 63 Cm And Side Stands Of 12 Cm. 3 ) The Overall Height Of The Chair Should Be 110Cm According To The Level Of Vision At Site , 30” C / Crecliner Functional Specifications:-Supplying Fabricating And Installation Of Motorised Recliner Chair Complete. Back Frame:840Mm X 530Mm Made With 25 X 25Mm 18 Swg Tube, Pu Form Of 20Mm Topped Over Frame And Upholstery Filled With Recron Fibre Of Virgin Conjugated Hollow Siliconized Polyster Fibre 15Dn X64 Mm Cut Length Of Average 5Rdquo; Thick With Head Rest And Lumbar Support With Upholstery Back Covering. Back Frame Stripped With Coil Springs 3 Numbers And Elastic Belts In Suitable Spacing And Shape To Support Theupholstery And All Metal Portions Power Coated.Seat Frame: 560Mm X550mm Made With 25 X25mm Pipe Of 18 Swg Pu Formof Average 65 Mmthick Of 32Kg / M3 Density And Uphosteryfilled With Recron Fibre Ofvirgin Conjugated Hollow Siliconized Polyster Fibre 15Dn X64 Mm Cut Length And Frames Stripped With Coil Springs 4 Numbers And Elastic Belts In Suitable Spacing And Shape To Support Theupholstery And All Metal Portions Power Coated. Side Stand : 880Mm X 585Mm Made Of 100Mm X 25Mm& 25 X25mm 18 Swg Tubes And 6Mm Ms Flat To Meet The Structural Requirements And Side Coverd With 5Mm Thick Fabric Upholstery Board. For All Inside Legsupto Half Portion And Every End Row Leg Should Be Completely Coverd With The Fabric Upholstery Board, Cup Holder And All Metal Parts Powder Coated.Recliners Including Couple Sets With Foldable Arm Rest .Foundation Bolt:90 X 8Mm, Chemical Bonding With 2 Nos Each Per Leg. Mechanism:Imported Motorised Recliner Mechanismsupported By Okin Delta Drive Heavy Duty Actuators With 5Apower Supply Requirement. Mechanism Mounted On A Foundation Base Of 610Mm X 760Mm Metal Frame For Additinal Support. Back Inclination Can Be Adjusted As Per Eye Vision Requirement. Upholstery: 3Mm Foam Laminated Fabric Of Approved Shade Of Special Cloth Made For Theatre Seating. ( Water Repellend Optional ) .Note: All Seats Can Be Provide Logo Design With Emblem-Embroidery. Centre To Centre Of Chairs Will Be 76 Cm And Side Stand Of 15 Cm Extra. The Overall Height Of The Chair Should Be105-110Cm. ( As Per Drawing And As Directed By Engineer In Charge )

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	17-10-2023	Date extention	Date	26-10-2023

INR 2950 /-

INR 50000.0 /-

INR 75.80 Lakhs /-