Procurement Of Special Type Fasteners, Bush Bearing Assy, Key Bar, Love Joy Coupling And Other Tit-Bit Items For Regular Maintenance Of Boiler Of Both Unit 5 And 6 Under Bmd, Stps. , Bolt, Ft, Size=2 In, L=160Mm, Pitch=5.00, Ht Hex Hd, Grade 12.9 , Bolt, Ht Hex Head, M39x110 , Thread Length 80Mm, Grade 10.9. , Bolt, Hex Hd, M36x180 Pt, Tl-100Mm, Ht 12.9 Pitch 4.0 , Screw Socket Head Cap Screw M16x50 # Grade-10.9 , Washer, Spring, M24 , Plug, Ms With Square Head Size M41x20 Mm For Bowl Mill Xrp-883 Pitch Length 11G. Additional Data: As Per Attached Drawing. , Ht Screw Cap Soc M30x230x2 Mm Ht # 155Kg Tightening Torque , Allen Head Bolt M30x3.5, L230, Pt 75Mm For Coal Mill Xrp 1003 Bowl Mill, Grade 12.9 Additional Data: Pitch 3.5 Mm. , Bolt, Special Type, M27x95 Mm, Pt, Moc:Ms For Victaulic Coupling Length 55 Mm , Round Head Elliptic Neck Grade 10.9 Additional Data: As Per Attached Drawing. , Bolt, M36x240, Grade-12.9 For Bowl To Bowl Hub Of Bowl Mill Xrp-883 Additional Data: Part Thread. , Bolt, Tapper Stud With Nut L: 149 Mm # Tapper Stud Bolt With Nut For Pa / Fd Fan Casing Length: 149 Mm ( 49 Mm + 69 Mm + 31 Mm ) Dia: M24 D32 Mm D29 Mm M22 With Nut M24 & M2 2 , Coupling Assy, Lovejoy Coupling, L-110 # , Coupling Assy, Lovejoy Coupling, L-150 # , Coupling Assy, Lovejoy Coupling L-075 , Coupling, Lovejoy L-095 For Elecon Make S / R , Coupling Assy, Lovejoy Coupling, L-100 # , Rubber Spider Size:L150 # Lovejoy # , Bar, Size:5X4 Mm, Moc:En-8 For Coupling / Drive Key , Bar, Size:6X5 Mm, Moc:En-8 For Coupling / Drive Key , Bar, 6 Mm Square Bar , Bar, Size:8X6 Mm, Moc:En-8 For Coupling / Drive Key , Key Bar, Size:10X8 Mm, Moc:En-8 Transmission System , Bar, Size:12X10 Mm, Moc:En-8 For Coupling / Drive Key , Bar, 12 Mm Square Bar, Mat- En 8 , Bar, Size:18X12 Mm, Moc:En-8 For Coupling / Drive Key , Bar, Size:22X15 Mm, Moc:En-8 For Coupling / Drive Key , Bar, Size:20X15 Mm, Moc:En-8 For Coupling / Drive Key , Bar, Size:16X10 Mm, Moc:En-6 For Coupling / Drive Key , Bar, 8 Mm Square Bar # , Bar, 10 Mm Square Bar , Coupling Boltadditional Data: As Per Attached Drawing , Coupling Boltadditional Data: As Per Attached Drawing , Bearing Assembly As Per Sketch No.-Wbpdcl / Bktpp / Bm / 42# For Coal Feeder Inlet Knife Gate , Bush For Bearing Assembly # As Per Sketch No.-Wbpdcl / Bktpp / Bm / 75# For Inlet Knife Gate 36In Gravimetric Coal Feede , Circlip, Internal, Size: 14X1.0 Mm Spec. Conforming To Din472 Is 3075 , Circlip, External, Size: 30X1.5 Mm Spec. Conforming To Din471 Is 3075 , Circlip, External, Size: 50X2.0 Mm Spec. Conforming To Din471 Is 3075 , Stud, M36x1100 Mm, Base Bolt, Std Thread For Pa Fan Motor Thread Length-300 Mm On Both Side, One Set Consist Of A ) One No Stud ( Grade-10.9 ) ; B ) Two Nos. Matching Nut ( Grade-10 ) ; C ) Two Nos. , Stud, M36x1450mm Pt, Tl-300, Ht Gr-10.9 For Id Fan Base Bolt Thread On Both Side, One Set Consist Of One No Stud ( Grade-10.9 ) , Two No Matching Nuts ( Grade-10 ) And Two No M36 Washers , Stud, M42x1000mm Pt, Tl-300, Ht Gr-10.9 For Pa Fan Motor Base Bolt Threadon Both Side, One Set Consist Of One No Stud ( Grade-10.9 ) , Two No Matching Nuts ( Grade-10 ) And Two No M42 Washers. , Stud, M42x1100mm Pt, Tl-300, Ht Gr-10.9 For Id Fan Motor Base Bolt Thread On Both Side, One Set Consist Of One No Stud ( Grade-10.9 ) , Two No Matching Nuts ( Grade-10 ) And Two No M42 Washers , Burner, Square Head Pivot Pin # # For Direct Nozzle Tilting Mechanism, U#5, 6 Additional Data: With A Hole Dia:21Mm At Square Head, Material:Ss-304. , Pin, Split Pin Size:4.5X82 Mm, Moc:Ss-316 , Nipple, Hex, Cs Sa106b, 1 1 / 2 , Bs3799-1974 For Mill Xrp883 Spring Compression Sealing Hose Additional Data: As Per Attached Drawing , Nipple, Hex, Cs Sa106 Gr-B, 2 , Bs3799-1974 For Coal Mill Xrp-883 Trunion Shaft Sealing Hose Additional Data: As Per Attached Drawing.
