Bids Are Invited For 1 Providing & Placing Executive Table Of Size 1800 X 900 X 750Mm (Wxdxh) With Side Unit Of Size 1050 X 450 X 750Mm (Wxdxh), Top Made In 60Mm Thick Of Wood Veneer Finish On Mdf Board, In Two Tones Duly Polished In Melamine Finish, New Delhi-Delhi

Bids Are Invited For 1 Providing & Placing Executive Table Of Size 1800 X 900 X 750Mm ( Wxdxh ) With Side Unit Of Size 1050 X 450 X 750Mm ( Wxdxh ) , Top Made In 60Mm Thick Of Wood Veneer Finish On Mdf Board, In Two Tones Duly Polished In Melamine Finish & Deco Paint With Cable Manager On Top. Top Rest On Round Ms Chrome Finish Studs Of Dia 50Mm Of 100Mm Height . Modesty Made In 16Mm Thick Of Wood Veneer Finish On Mdf Board, In Two Tones Duly Polished In Melamine Finish & Deco Piant. Main Table Provision Of One Side Having Two Drawer Of Fixed Pedestal Of Size 400X485x500mm ( Wxdxh ) . Pedestal Top, Bottom & Sides Made Of 20Mm Thick Of Wood Veneer Finish On Mdf Board Duly Polished In Melamine Finish. Pedestal Back & Drawers Bottoms Made Of 6Mm Thick Ply Duly Polished Running On Good Quality Of Telescopic Chanels For Smooth Running With Central Locking Arrangememts. Side Unit Having One Side Two Openable Shutter Made Of 20Mm Of Wood Veneer Finish On Mdf Board Duly Polished In Melamine Finish. And Other Side Having One Open Shelf & Keyboard Tray At Middle Running On Good Quality Of Telescopic Channels. Nos. 2 2 Providing & Placing Executive High Back Revolving Chair With Dual Layered Leatherite Upholstered Foam At Seat And Back For Comfortable Seating . The Height Of Back From Seat Shall Be 28” For High Back Chair . The Arm Rest Shall Be Wooden Dully Polished With Aluminum Brackets For Strength And Aesthetics , The Chair Shall Have Pneumatic Height Adjusted Tilting And Revolving Mechanism With Five Pronged Steel Reinforced Wooden Base With Twin Wheel Castors For Smooth And Easy Movement. Nos. 2 3 Providing & Placing Executive Medium Back Revolving Chair With Dual Layered Leatherite Upholstered Foam At Seat And Back For Comfortable Seating . The Height Of Back From Seat Shall Be 22” For Medium Back Chair . The Chair Shall Have Elliptical M.S. Pipe Frame Not Less Than 16 Swg With Inserters For Extra Strength Dully Powder Coated With Rubber Shoes Arm Rest Shall Be Wooden Dully Polished With Aluminum Brackets For Strength And Aesthetics. Nos. 4 4 Providing & Placing Designer Sofa Fully Upholstered. Frame Made Of Good Quality Wood Duly Anti-Termite Treated, Seat Made Of Good Quality Flat Steel Spring Used In Seat Frame Duly Covered With Coir, Jute Cloth And Markeen Fixed With 4” Thick Isi Mark High Density ‘U’ Foam. Back & Arm Rest Made Of Flat Steel Spring, Covered With Coir, Jute Cloth And Markeen Fixed With 2” Thick Isi Mark High Density ‘U’ Foam For Giving Shape In Back And Arm Rest. 4.1 3 Seater Nos. 2 4.2 1 Seater Nos. 2 5 Providing & Placing Centre Table Of Size 1200 X 600 X 450Mm ( Wxdxh ) .Top Made Of 25Mm Thick Commercial Board With 1Mm Laminate Of Standard And Approved Shade Teak Moulding Provided At The Borders Duly Melamine Polish. It Is Having Shelf At The Bottom Made Of 19Mm Commercial Board With 1Mm Laminate Of Standard And Approved Shade Teak Moulding Provided At The Edges Duly Melamine Polished. It Is Also Having Glass Top. Nos. 2 6 Providing & Placing Wooden Corner Table Of Size 600 X 600 X 450Mm ( Wxdxh ) .Top Made Of 25Mm Thick Commercial Board With 1Mm Laminate Of Standard And Approved Shade Teak Moulding Provided At The Borders Duly Melamine Polish. It Is Having Shelf At The Bottom Made Of 19Mm Commercial Board With 1Mm Laminate Of Standard And Approved Shade Teak Moulding Provided At The Edges Duly Melamine Polished. It Is Also Having Glass Top. Nos. 2 7 Providing & Placing Table Of Size 1500X600x750mm ( Wxdxh ) With Side Unit Of Size 900X450x750mm ( Wxdxh ) . Top Made 25Mm Thick Commercial Board With 4Mm Thick Teak Ply Duly Polished In Desired Shade. Teak Molding / Margin Provided At All Expose Edges Duly Good Quality Polished In Desired Shaded. Base Made Of 19Mm Thick Commercial Board With 4Mm Thick Teak Ply Duly Polished In Desired Shade. Teak Molding / Margin Provided At All Expose Edges Duly Good Quality Polished In Desired Shaded. Modesty ( Middle Tie ) Made Of 12Mm Ply Board Duly Polished In Approved & Desire Shaded. Teak Molding / Margin Provided At All Edges Duly Polished. It Is Having Pullout Keyboard Tray In Side Unit. It Is Also Having Fixed Type Pedestal Unit In Main Table. 8 Providing & placing high back revolving chair with headrest of overall size 715W x 715D x 1250H. Seat plywood made of 12mm hot pressed with upholstery PVC structure moulded with prime quality high stretch fabric mesh. Seat & back are firmly connected to the base frame machanism. Center tilt seat & back are fixed together and the whole structure moves together in one direction. Machanism provided upright position locking. Tilt adjustment can be operated in seating position. Chair max height 1250 . 470W x 460D base seat 70mm thick moulded with PU foam D- 45kg/m3 & 500W x 780H back seat PP structure moulded with fabric mesh. Headrest adjustable type PU foam with PP cover at back. 415 handle in / 590 handle out arm rest fixed type PP. Height from seat to ground 460mm. Height from seat to handle 160mm. Understructure used chrome plated steel base with 3 pieces bellow. Casters made of moulded black nylon metal bolt inserted & fitted with 5 nos. twin wheel casters 50mm dia. pedestral pitch centre dia 665mm without casters. Nos. 8 9 Providing & placing medium back chair of overall size 580W x 550D x 940H. Seat plywood made of 12mm hot pressed. Upholstery PVC structure moulded with prime quality high stretch fabric mesh. Seat are firmly connected to the base structure 25mm dia round pipe 1.6mm thick chrome finished. Understructure base made of chrome plated 25mm dia round 1.6mm thick chrome finished. Chair max height 940mm. 510w x 480d base seat 70mm thick moulded with PU foam d - 45kg/m3 & 460w x 490h back seat pp structure moulded with fabric mesh. 480 handle in / 580 handle out arm rest fixed type pp chrome plated surmounted by pp structure. Arm rest height from seat 160mm . height from seat to ground 480mm. Nos. 20 10 Providing and Placing Storage unit/ Printer table of size 600x600x750mm (wxdxh) made of 19mm thick commercial board with 4mm thick teak ply duly polished in desired shade or 1mm laminate of standard and approved shade. Teak molding/margin provided at all expose edges duly good quality polished in desired shaded. . It is having drawer & 2 openable shutterat bottom. Nos. 3 11 Providing & placing designer sofa fully upholstered Frame made of good quality wood duly anti-termite treated, Seat made of good quality flat steel spring used in seat frame duly covered with coir, jute cloth and markeen fixed with mark high density ‘U’ foam. Primary Material: Wood, secondary material :Foam Upholstery Material. We use all the good quality & Durable material in the sofa like premium quality foam,reliance fiber,wood,high quality elastic belt & good quality legs. 11.1 3 Seater No. 1 12 Providing & placing wooden centre table of size 1200x600x450mm. (wxdxh). Frame made of teak wood duly polished. Top frame made of teak wood duly polished of desire shade with 8mm thick glass. Shelf provided at the bottom duly polished with melamine finish. No. 3 13 Providing & placing Table of size 1500x600x750mm (wxdxh) with side unit of size 900x450x750mm (wxdxh). Top made of 25mm thick commercial board with 4mm thick teak ply duly polished in desired shade or 1mm laminate of standard and approved shade. Teak molding/margin provided at all expose edges duly good quality. Base made of 19mm thick commercial board with 4mm thick teak ply duly polished in desired shade or 1mm laminate of standard and approved shade. Teak molding/margin provided at all expose edges duly good quality. Modesty (Middle Tie) made of 12mm ply board duly polished in approved & desire shaded. Teak molding/margin provided at all edges duly polished.It is having pullout keyboard tray in side unit table. It is also having Fixed type pedestal unit in main table. Partition panel laminated /upholested of 72 mm thick & 1200mm. height, snap on panel made of 12 mm prelaminated particle board duly edgebanded with raceway running at 2 levels one at skirting & one above or below the worktop.Basic structure is composed of rolled steel vertical and horizontal members 38x38mm in 18 guage duly powder coated upto 40-50 microns to make the basic framework of partition.Structure can be configured into any shape in 90 degree angle. All steel components are duly powder coated. 14 Providing & placing modular linear back to back workstation of size 1200x600x750mm (wxdxh). Worktop made of 25mm thick commercial board with 1mm laminate of standard and approved shade. Teak molding/margin provided at all expose edges duly good quality polished or 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. Partition panel laminated /upholested of 72 mm thick & 1200mm. heightt, snap on panel made of 12 mm prelaminated particle board duly edgebanded with raceway running at 2 levels one at skirting & one above or below the worktop.Basic structure is composed of rolled steel vertical and horizontal members 38x38mm in 18 guage duly powder coated upto 40-50 microns to make the basic framework of partition.Structure can be configured into any shape in 90 degree angle. All steel components are duly powder coated. Size of partition:- 1200 x 1200 ( Wx H) = 13 nos,and 600 x 1200 ( Wx H) = 18 nos. KeyBoard tray of size 600x400mm (wxd) made in 19mm thick commercial board with 1mm laminate of standard and approved shade. Teak molding/margin provided at all expose edges duly good quality polished or 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. . CPU Trolley made of CRCA in 22 guage duly powder coated up to 40-50 microns with lockable nylon wheel castors. Nos. 2 Fixed three drawer unit of size 400x575x725mm (wxdxh) made in 19mm thick commercial board with 1mm laminate of standard and approved shade. Teak molding/margin provided at all expose edges duly good quality polished or 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. . Three drawer (2 single & 1 filling drawer) .It shall have a single multi drawer lock .The top two drawers shall have movement on nylon rollar channel and bottom drawer on telescopic channel. 15 Providing & placing medium back overall size 740W x 740D x 900H. Seat plywood made of 12mm thick hot pressed. Upholstery PP structure moulded with prime quality high stretch fabric mesh. Seat & back are firmly connected to the base frame machanism. Machanism provided updown position locking. Centre tilt adjustment can be operated in seating position. Back seat PP structure moulded with fabric mesh. Understructure made of steel inserted nylon base with 3 piece bellow. Casters made of moulded black nylon metal bolt inserted & fitted with 5 Nos. twin wheel casters 50mm dia. Nos. 12 16 Providing & placing storage of size 750x450x1200mm (wxdxh) made of 19mm thick commercial board with 4mm thick teak ply duly polished in desired shade or 1mm laminate of standard and approved shade. Teak molding/margin provided at all expose edges duly good quality polished in desired shaded. . It is having three shekves making four compartments. Nos. 4 17 Providing & placing Table of size 1350x600x750mm (wxdxh) with side unit of size 900x450x750mm (wxdxh). Top made of 25mm thick commercial board with 4mm thick teak ply duly polished in desired shade or 1mm laminate of standard and approved shade. Teak molding/margin provided at all expose edges duly good quality. Base made of 19mm thick commercial board with 4mm thick teak ply duly polished in desired shade or 1mm laminate of standard and approved shade. Teak molding/margin provided at all expose edges duly good quality. Modesty (Middle Tie) made of 12mm ply board duly polished in approved & desire shaded. Teak molding/margin provided at all edges duly polished.It is having pullout keyboard tray in side unit table. Partition panel laminated /upholested of 72 mm thick & 1200mm. height, snap on panel made of 12 mm prelaminated particle board duly edgebanded with raceway running at 2 levels one at skirting & one above or below the worktop.Basic structure is composed of rolled steel vertical and horizontal members 38x38mm in 18 guage duly powder coated upto 40-50 microns to make the basic framework of partition.Structure can be configured into any shape in 90 degree angle. All steel components are duly powder coated. Nos. 3 18 Providing & placing computer table of size 1200x600x750mm (wxdxh). Top made 25mm thick commercial board with 4mm thick teak ply duly polished in desired shade. Teak molding/margin provided at all expose edges duly good quality polished in desired shaded. Base made of 19mm thick commercial board with 4mm thick teak ply duly polished in desired shade. Teak molding/margin provided at all expose edges duly good quality polished in desired shaded. Modesty (Middle Tie) made of 12mm ply board duly polished in approved & desire shaded. Teak molding/margin provided at all edges duly polished. It is having keyboard tray, right hand side provided fixed pedestal unit having 2 drawer + 1 filling with central lock & handle. Left hand side open storage space for UPS & CPU. No. 1 19 Providing & placing overhead storage of size 600x350x750mm (wxdxh) made of 19mm thick commercial board with 4mm thick teak ply duly polished in desired shade or 1mm laminate of standard and approved shade. Teak molding/margin provided at all expose edges duly good quality polished in desired shaded. . It is having one shelf making two compartments. Nos. 2 20 Providing & placing conference table of size 3000x1200x750mm (wxdxh). Top made 25mm thick commercial board with 4mm thick teak ply duly polished in desired shade. Teak molding/margin provided at all expose edges duly good quality polished in desired shaded. Base made of 19mm thick commercial board with 4mm thick teak ply duly polished in desired shade. Teak molding/margin provided at all expose edges duly good quality polished in desired shaded. Modesty (Middle Tie) made of 12mm ply board duly polished in approved & desire shaded. Teak molding/margin provided at all edges duly polished. Total Quantity : 80

Refer document

INR 100000.0 /-

Refer document