|
| 1 | SUPPLY OF MATERIALS (Part-A) |
| 2 | Holding Clamp for Top Chanel (STP/PCC) |
| 3 | Suspension Clamp for ABC Cable |
| 4 | Dead End Clamp for ABC Cable |
| 5 | Stone Pad (300x300x75 MM) |
| 6 | Earth wire clamp with bolts & nuts |
| 7 | Danger Board with clamp for 11KV & 33 KV |
| 8 | GI Barbed wire |
| 9 | Aluminium Paint |
| 10 | Red Oxide Paint |
| 11 | Bolts, Nut & Washer All size |
| 12 | Aluminium Crimping Lug 240 sqmm |
| 13 | Aluminium Crimping Lug 400 sqmm |
| 14 | LT Shackle Insulator |
| 15 | MEGGER (Insulation Tester) 5KV Analog (Make MOTWANE, Model B50K) Battery operated |
| 16 | Multi Meter (Make MECO) |
| 17 | Multi Meter (Make FLUKE) |
| 18 | Digital Earth Tester |
| 19 | Chemical Earthing Complete |
| 20 | Chemical Pipe Earthing 9 LS for Power T/f |
| 21 | Structure for 33 KV Line Isolator |
| 22 | Structure for Post insolator |
| 23 | Clamp Meter(Make MECO 27) |
| 24 | I- Hook |
| 25 | LT Cubical Box With Tailness Unit |
| 26 | Tailness Unit 500 Amp |
| 27 | Tailness Unit 300 Amp |
| 28 | Copper Strip 50x6sqmm |
| 29 | GI Strip 50x6 |
| 30 | Service Clamp for ST Pole |
| 31 | MS Angle 50x50x6 MM 18\" |
| 32 | U-Bolt with Nuts |
| 33 | Copper L Piece 50x225x10 mm |
| 34 | GI Pipe 8\" |
| 35 | Clamp for Fixing Pipe |
| 36 | 4 Core LT MCB With Box |
| 37 | Clamp With Nut Bolt |
| 38 | VARIAC 100A |
| 39 | VARIAC 400A |
| 40 | OMICRON RELAY TESTING KIT |
| 41 | Transformer Oil BDV Test Kit (30/60/ 80/100 kv) Automatic |
| 42 | Power TRANSFORMER TURN\"S RATIO TESTER DIGITAL |
| 43 | ACCUCHECK- 33 KV |
| 44 | ACCUCHECK -11 KV |
| 45 | ACCUCHECK- LT |
| 46 | 3 PHASE CUT OUT KIT FUSE UNIT (400 A) (5/10 MVA TESTING BOARD) |
| 47 | POWER FACTOR METER |
| 48 | SCREW DRIVER SET |
| 49 | TOOL BOX KIT |
| 50 | SPANNER SET |
| 51 | PHASE SEQUENCE INDICATOR |
| 52 | LOADING CT TESTING SET (600-100 A/ 5A) |
| 53 | CT POLARITY TEST KIT |
| 54 | SUBSTATION AUXILIARY RELAYS |
| 55 | RELAY FOR 33KV PANEL (Make STELMEC) |
| 56 | RELAY FOR 33KV PANEL (Make MICOM) |
| 57 | RELAY FOR 11KV PANEL (Make MICOM) |
| 58 | RELAY FOR 11KV PANEL (Make STELMEC) |
| 59 | PLA RELAY 24DC/240V AC |
| 60 | 11 KV Stay Insolator |
| 61 | MOUNTING, FITTING & ERECTION OF WORK AS PER RESPO NORM. (Part-B) |
| 62 | Erection of complete structure for 33 Kv Isolator in switch yard as per RESPO drawing. Work also includes construction of gantry plinth of size 1.0x0.45x0.45 cum with cement,coarse sand and ballast in ratio 1:3:6 and plastaring of plinth with cement & sand in ratio 1:4 including digging of pits & backfilling. All related plinthing material will be arrange by the contractor asper Resspo and Electrical safety rules. |
| 63 | Erection of complete structure for 33 KV post Insulators in Switch yard. Work includes Installation of 3 Nos. 33 KV Post Insulator on each structure complete as per schedule, grouting of Structure with Ist class brick ballast in the ratio of 1:3:6, plastering in the ratio of 1:3 on plinth size 0.90x0.45x0.45 Cum. The work is to be done strictly as per RESPO drawing. All related plinthing material will be arrange by the contractor asper Resspo and Electrical safety rules.. |
| 64 | Laying of single 33 KV 3x300 sq mm XLPE cable by manual drilling method. The cable shall be laid at the depth of 1050 mm from the surface of road. The cable shall be laid strictly in compliance to RESSPO Norms and Electrical safety rules. (The rates must be quoted for each cable of length per mtr.) |
| 65 | Fixing and providing ofHeat Shrink cable type end Terminations suitable for 33 KV, 3x300 sq mm XLPE cable and 33 KV 3X300 sq mmISI mark jointing kit Outdoor. |
| 66 | Hoisting of 33 KV 3x300 sq mm XLPE cableproviding GI pipe of size 6” dia 3 M long on single pole support including its jumpering, complete with clamps, nut & bolts. |
| 67 | Construction of complete T/F plinth size 3mx3m x 0.3 Mtr. above the ground level and 0.75 Mtr. deep foundation made as per drawing. Top of plinth is to be C.C. work in the ratio of 1:3:6 fitted with 3 Mtr. long, 90 lbs, 2Nos. rail pieces. Cement mortar is to be used in 1:3 ratio. All material will be arrange by the contractor asper Resspo and Electrical safety rules.. |
| 68 | Safe shifting and mounting of 33/11 KV 10 MVA T/F on the transformer plinth. This work includes dragging loading, shifting, lifting and complete assembling after placing on the plinth.All special and ordinary T&P is to be arranged by the contractor. Special care is to be taken to avoid tilting of T/F and loss of transformer oil. Any damage in T/F will be chargeable to contractor. |
| 69 | Special earthing of PowerT/F neutral by boring 2\" dia 20 feet long G.I. pipe in the wet earth and connecting it with 35x6 mm. G.I. strip to T/F neutral giving half round turn at the T/F. Two separate earthing to be provided to T/F body by connecting it with earth mat by special earthing arrangement for earthing work. Material like strip of size 50x6/35x6 mm and G.I. pipe 2” dia 2.9 mm thick. All material will be arrange by the contractor asper Resspo and Electrical safety rules.. |
| 70 | Safe shifting and removing of 33/11 KV Power T/F from theplinth. This work includes dragging, loading,unloading, shifting, lifting, complete removing from the plinth and carriage from site to store.All special and ordinary T&P is to be arranged by the contractor. Special care is to be taken to avoid tilting of T/F and loss of transformer oil. Any damage in T/F will be chargeable to contractor. |
| 71 | 5 MVA |
| 72 | 8 MVA |
| 73 | Eerection, grouting, plinthing & painting of 11 mtr double pole double support with fixing of necessary clamps and other accessories like channel,, angle iron etc.grouting ratio 1:4:8, cement, stone grit & coarse sand, plinthing of support of size 0.4x0.45x0.3 Mtr.with cement sand& bricks blast in ratio 1:4:8 and 12 mm thick plastring around the plingth in ration 1:2:4 with 12 mm thickness curing of plingth should be done properly (Grouting , plinthingmaterial will be arranged by the contractor as per Resspo and Electrical Safety rule,only S.T.Pole provided by Deptt.) |
| 74 | Earthing of support/Pannel complete with the help of M.S. rod 16 mm dia and 2.5 mtr. long, fastening of G.I. wire with clamps/X-arm/support to M.S. earth rod. (All material will be arranged by the contractor as per Resspo and Electrical Safety rule) |
| 75 | Fixing & grouting of stay rod with cement, sand and bricks ballast in ratio !:4:8 and fasteniong the stay wire with pole and stay rod nozzling.(Grouting and all material will be arranged by the contractor with one year gauranty asper Resspo and Electrical safety rules.) |
| 76 | Laying of single 11 KV, 3x185/3x120 sq mm XLPE cable normal soil by digging of trench 900 mm deep, 600 mm wide including supply of required material like first class brick, stone pad and sand etc. The enter axial spacing between two cable( in case of any other cable is also running in parallel) should be in between o.25 mtr. to .40 mtr. The cable shall be laid between two continous rows of bricks, river sand packing on all side of cable shall be done. After laying down of the cable the stone slab shall be laid in such a manner so that cable channel is completely covered from top. The cable shall be laid strictly in compliance to RESSPO Norms and Electrical safety rules (All material required for laying will be supplied by the contractor. 11 KV cable provided by Deptt.) |
| 77 | Fixing ofHeat Shrink cable type end Terminations suitable for 11 KV, 3x185/3x120 sq mm XLPE cable and 11 KV 3x185/3x120 sq mmISI mark jointing kit will be arrange by the contractor with one year gauranty asper Resspo and Electrical safety rules. |
| 78 | Outdoor/indoor jointing kit |
| 79 | Straight through jointing kit |
| 80 | Hoisting of 11 KV 3x185/3x120 sq mm XLPE cableproviding GI pipe of size 6” dia 3 M long on double pole including its jumpering, complete with providing all required material arrange by contractor with one year gauranty asper Resspo and Electrical safety rules. |
| 81 | Construction of 11/0.4 KV Transformer plinth in size 1.5x1.5x 1.8 mtr. Height, including 0.6 mtr. below G.l. in bottom 1:4:8 cement sand and brick ballast; concreting upto 15 cm. thickness after ramming should be done. Thickness of 1st class brick work should be 0.35 mtr. below G.L. and above G.L. It should be 0.23 mtr. brick work bill be done with 1:4 cement, sand mortar, The space between the four walls should be filled with sand by ramming and watering keeping a space of 0.15 mtr on lop for 1:2:4 cement stone ballast and sand concreting. The two channels should be grouted as per direction of site in charge. All the sides of wall above G, L. should be plastered by 1:6 cement sand mortar having 12 mm thickness. |
| 82 | Providing and fixing of welded wire mesh fencing, around transformer plinth having one locking arrangements, Fencing should be provided by grouting MS angle 40x40x5 mm. length of 1.5 m. on all the sides as per standard practice and design. The painting of fencing should be done by good quality green paint with two coats after rubbing and cleaning and providing one coat red oxide primer. The fencing should be 2 M. above ground level. The rates should be inclusive of all materials required for completion of above work. |
| 83 | Erection & commissioningof T/F 400/250/100 on D.P. along with HT/LT connections with copper L-piece. Complete in all respect,as per Resspo and Electrical Safety rule |
| 84 | Earthing of transformer body and neutral by lowering of chemical pipe/Rod (earthing)connecting with GI Strip of size 50x6 mm with clamps, all material will be provided by contractor as per Resspo and Electrical Safety rule |
| 85 | Erection, grouting, plinthing, earthing & painting of 11 mtr long sub station type D/P formounting of T/Fs with all accessories like 11 kv fuse set, TPMO, top channel, grouting in ratio1:4:8, cement, stone grit & coarse sand, plinthing of support of size 0.4x0.45x0.3 Mtr.with cement sand& bricks blast in ratio 1:4:8 and 12 mm thick plastring around the plingth in ration 1:2:4 with 12 mm thickness curing of plingth should be done properly as per Resspo and Electrical Safety rule |
| 86 | Eerection, grouting, plinthing & earthings of 11 mtr single supportwith fixing of necessary clamps and other accessories like M.S.channel,angle, grouting ratio 1:4:8, cement, stone grit & coarse sand, plinthing of support of size 0.4x0.45x0.3 Mtr.with cement sand& bricks blast in ratio 1:4:8 and 12 mm thick plastring around the plingth in ration 1:2:4 with 12 mm thickness curing of plingth should be done properly (Grouting , plinthing and all required material will be arranged by the contractorwith one year gauranty as per Resspo and Electrical Safety rule,only S.T.Pole provided by Deptt.) |
| 87 | Earthing of support/Pannel complete with the help of M.S. rod 16 mm dia and 2.5 mtr. long, fastening of G.I. wire with clamps/X-arm/support to M.S. earth rod. (All material will be arranged by the contractor as per Resspo and Electrical Safety rule) |
| 88 | Fixing & grouting of stay rod with cement, sand and bricks ballast in ratio !:4:8 and fasteniong the stay wire with pole and stay rod nozzling.(Grouting and all material will be arranged by the contractor with one year gauranty asper Resspo and Electrical safety rules.) |
| 89 | Spreading and stringing of 1 stay wire/ACSR weasel continuous conductor for hanging 11 KV cable including binding of insulator complete in all respect. The work includes jumpering/connecting of conductor at sectional poleas per Resspo and Electrical Safety rule |
| 90 | Laying of single 11 KV, 3x185/3x120 sq mm XLPE cable Hanging/normal soil by digging of trench 900 mm deep, 600 mm wide including supply of required material like first class brick, stone pad and sand etc. The enter axial spacing between two cable( in case of any other cable is also running in parallel) should be in between o.25 mtr. to .40 mtr. The cable shall be laid between two continous rows of bricks, river sand packing on all side of cable shall be done. After laying down of the cable the stone slab shall be laid in such a manner so that cable channel is completely covered from top. The cable shall be laid strictly in compliance to RESSPO Norms and Electrical safety rules (All material required for laying will be supplied by the contractor. 11 KV cable provided by Deptt.) |
| 91 | Fixing ofHeat Shrink cable type end Terminations suitable for 11 KV, 3x185/3x120/3x70 sq mm XLPE cable and 11 KV 3x185/3x120/3x70 sq mmISI mark jointing kit will be arrange by the contractor with one year gauranty asper Resspo and Electrical safety rules. |
| 92 | Outdoor |
| 93 | Laying/hanging of following LT cable of different sizes for main/distribution/connecting the main cable from T/F to tailless unit and for distribution, from tailless unit to LT section Pole, crimping the both ends of cable if required and tapping be made inside distribution box making channel of first class brick and filling with soil. |
| 94 | 1x400/240 sq. mm. |
| 95 | 3 ½ 400/240 sq. mm. |
| 96 | 3 ½x150 sq. mm. |
| 97 | Erection and grouting of LT Cubical Box, Making platform for stepping, plastering the same with cement sand in raio 1:6 Fising the tailless nit 500/300 Amp making LT Bus Bar and its taping. |
| 98 | Errection andFixing the tailless unit 500/300 Amp in existing LT cubical Box/Double pole making LT Bus Bar and its taping. |
| 99 | 500 Amp. |
| 100 | 300 Amp. |
| 101 | Dismantling of all the HT/LT line, connections & earthing of old 11/.4 kV,250 KVA transformer along with LT cubical box, cable GO set, DO set & T/F, safe loading carrage and unloading of dismentled item from site of work to center store Naini/Power House store/Dump site. |
| 102 | Erection & commissioningof T/F 400/250/100 on D.P. along with HT/LT connections with copper L-piece. Complete in all respect,as per Resspo and Electrical Safety rule |
| 103 | Earthing of transformer body and neutral by lowering of chemical pipe/Rod (earthing)connecting with GI Strip of size 50x6 mm with clamps, all material will be provided by contractor as per Resspo and Electrical Safety rule |
| 104 | Laying/hanging of following LT cable of different sizes for main/distribution/connecting the main cable from T/F to tailless unit and for distribution, from tailless unit to LT section Pole, crimping the both ends of cable if required and tapping be made inside distribution box making channel of first class brick and filling with soil. |
| 105 | 1x400/240 sq. mm. |
| 106 | 3 ½ 400/240 sq. mm. |
| 107 | Erection and grouting of LT Cubical Box, Making platform for stepping, plastering the same with cement sand in raio 1:6 Fising the tailless nit 500/300 Amp making LT Bus Bar and its taping. |
| 108 | Errection andFixing the tailless unit 500/300 Amp in existing LT cubical Box/Double pole making LT Bus Bar and its taping. |
| 109 | 500 Amp. |
| 110 | 300 Amp. |
| 111 | Dismantling of all the HT/LT line, connections & earthing of old 11/.4 kV100/250 KVA transformer along with LT cubical box, cable GO set, DO set & T/F, safe loading carrage and unloading of dismentled item from site of work to center store Naini/Power House store/Dump site. |
| 112 | 250 KVA |
| 113 | 100 KVA |
| 114 | Erection, grouting, plinthing, earthing & painting of single support pole 9 mtr long STPfor LT line, including fixing of necessary clamps grouting in ratio1:4:8, cement, stone grit & coarse sand,plinthing of support of size 0.4x0.45x0.3 Mtr.with cement sand& bricks blast in ratio 1:4:8 and 12 mm thick plastring around the plingth in ratio 1:2:4 with 12 mm thickness curing of plingth should be done properly (Grouting & plinthing and all required material will be arranged by the contractor except 9 mtr long STPas per Resspo and Electrical Safety rule) |
| 115 | Errection&Commissioning of ACSR Weasl for neutral conductor in LT AB line with fixing of LT X-arm, LT shackle insulator, clamps etc. at existing LT pole as per Resspo and Electrical Safety rule |
| 116 | Errection&Commissioning of (3x120+1x195+1x16)/ (3x95+1x70+1x16) sq.mm ABC,necessary clamps, I-Hook, dead end clamp, suspension clamp,pierising connecter 1x35 sq.mm. & 1x16 sq.mm. PVC cable as per RESSPO norms will be arranged by the contractor exept AB cable and Weasel Conductor as per Resspo and Electrical Safety rule |
| 117 | Errection & Commissioning of distribution boxes/kiosk on the LT poles including all clamps & materials required, connections & sealing its connection in between Distribution Box & ABC 1x35 sq. mm LT PVC cable (all required Local materialsincluding Distribution box arranged by the contractor as per Resspo and Electrical Safety rule) |
| 118 | Opeing from old line & Reconnection with New LT Line of Consumers service cable of three phase /single phase |
| 119 | Single Phase |
| 120 | Three Phase |
| 121 | Cartage of 11/9 Mtr STP from Store to dump store/work Site Including loading and unloading |
| 122 | Cartage of 400/250 kva Transformer from Store to dump store/work Site Including loading andunloading |
| 123 | Cartage of LT 1x400, 1x240, 3.5x400, 3.5x240 sqmm from Store to dump store/work Site Including loading and unloading |
| 124 | Cartage of 3X185, 3x120, 3x70 SQ MM xlpe 11 KV XPLE CABLE from Store to dump store/work Site Including loading and unloading |
| 125 | Cartage of LT ABC from Store to dump store/work Site Including loading and unloading |
| 126 | Cartage of ACSR Weasel conductor from Store to dump store/work Site Including loading and unloading |
| 127 | Other petty materials as conductor, cross arms, channels, angles, D.O. fuse set, TPMO, LT cubical box, clamps etc. |
| 128 | Cartage of 10 MVA Transformer with comlete part of T/F & T/F oil from Store to dump store/work Site Including loading andunloading |
