|
| 1 | HYDRO MECHANICAL EQUIPMENT |
| 2 | (Bell Mouth): Design, manufacuring, supply and fixing of bell mouth of standard design and drawing for 700 mm dia (ID) main penstock pipe. |
| 3 | (Air Vent Pipe): Providing and fixing of Air Vent Pipe 150mm dia and 10 kg/cm2 pressure as per direction of Engineer In-charge. |
| 4 | (Main Penstock Pipe): Manufacturing, supply and fixing of spirally welded Penstock pipe of 700 mm dia (ID), 10 mm thick, and 420 m length. |
| 5 | (Branch Penstock Pipe): Manufacturing, supply and fixing 2 Nos. of spirally welded Penstock pipe of each measuring 500 mm dia. (ID), 10 mm thick, and 12 m length. |
| 6 | Laying, Cutting, Fabrication, Joining & Welding of penstock pipes i/c loading and unloading charge (Job work) |
| 7 | Applying priming coat with ready mixed primer of approved brand and manufacture on outer surface of steel penstock pipe. |
| 8 | Painting two or more coats with black anti-corrosive bituminoustic paint of approved brand and manufacture on outer surface of steel penstock pipe to give an even shade. |
| 9 | (Expansion Joint for Penstock Pipe): Providing and Fixing of ISCON Flexible Expansion Joint conforming to IS 210 FG-200, 720 mm (OD), Flanged ends drilled to IS 1538 with Matching M.S. Companion Flanges (2 nos.) Rubber Gasket, Bolt & Nut. |
| 10 | Manufacturing, supply and fixing of Air release valve 100 mm dia and 10 kg/cm2 pressure as per direction of Engineer In-charge. |
| 11 | (Saddle Sheet or Saddle Block): Providing and fixing of Saddle sheet suitable for 720 mm diameter (OD) penstock pipe at Saddle Blocks. |
| 12 | (Sluice Valve for Main Penstock Pipe): Manufacturing, supply & fixing of electrically operated Heavy Duty Sluice Valve of 700 mm dia. (ID) as per IS:14856 PD:2000, Thickness 10 mm with complete fitting accessories, flanged ends drilled to IS 1538 with Matching M.S. Companion (2 nos.) Flanges, Bolt, Nut & Rubber Gasket. Test Pressure: Body-25kg/cm2, Seat-18kg/cm2. |
| 13 | (Sluice Valve for Branch Penstock Pipe): Manufacturing, supply & fixing of Heavy Duty CI (IS 210 FG-200) Sluice Valve of 500 mm dia. (ID) as per IS:14856 PD:2000, Thickness 10 mm, Non-Rising Type SS-410 Spindle & Gunmetal Working Parts, Handwheel Operated, Flanged ends drilled to IS 1538 with Matching M.S. Companion (2 nos.) Flanges, Bolt, Nut & Rubber Gasket. Test Pressure: Body-25kg/cm2, Seat-18kg/cm2. |
| 14 | Providing and manifacturing of M.S. flange made by 25mm M.S plate suitable for 700mm Sluice valve (I.D) with necessary hole as per direction of Engineer In-Charge. |
| 15 | Providing and manifacturing of M.S. flange made by 25mm M.S plate suitable for 500mm Sluice valve (I.D) with necessary hole as per direction of Engineer In-Charge. |
| 16 | CARTAGE OF MATERIALS |
| 17 | Cost of Haulage i/c Loading & Unloading of Hydro-Mechanical Equipments upto project site. |
