|
| 1 | Dismantling the exiting 45 old point wiring, fitings approximate 45 no, running wire 250 mtr, old cable 180mtr,old SPNDB 3 nos, old PDB one no, old kit kat housing PDB 3 nos etc and kept them to deopartmental store room incl. mending good damages as per direction of the EIC. |
| 2 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded \"FRLS\" PVC insulated & unsheathed copper wire (RR Cable/KEI/ Polycab) in 20mm size PVC rigid conduit \"FRLS\" (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded \"FRLS\" PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/ Perspex (wall matching colour) top cover 3 mm thick and incl.175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish as to GS. [Vide page no-E-14,item no-2 ] |
| 3 | a) On board [Vide page no-E-15,item no-4(a)] |
| 4 | b) Average run 8 mtr [Vide page no-E-14,item no-2(c)] |
| 5 | c)Average run 10 mtr [Vide page no-E-14,item no-2(e)] |
| 6 | Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron FRLSame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment with cable end box. [ D-11,15 ] [D-12,16] Incoming - 415V, 25/35KA, 100A, FPMCCB [Legrand/SCHNEIDER](1 -nos)[ D-8,10 ] Outgoing - 10KA, (C-characteristics) 63A, TPMCB [Legrand/SCHNEIDER] (4 -nos) [ D-7,8 ] |
| 7 | a) 4 way [Legrand/SCHNEIDER/ L&T] |
| 8 | Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron FRLSame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment with cable end box. [ D-11,15 ] [D-12,16] Incoming - 415V, 25/35KA, 125A, FPMCCB [Legrand/SCHNEIDER] (1 -nos)[ D-8,10 ]Outgoing - 10KA, (C-characteristics) 63A, TPMCB [Legrand/SCHNEIDER] - (6 -nos)[ D-7,8 ] |
| 9 | 6 way [Legrand/SCHNEIDER/ L&T] |
| 10 | Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron FRLSame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment with cable end box. [ D-11,15 ] [D-12,16] Incoming - 415V, 25/35KA, 160A, FPMCCB[Legrand/SCHNEIDER] (1 -nos) [ D-8,10 ] Outgoing - 10KA, (C-characteristics) 63A, TPMCB - (6 -nos) [ D-7,8 ] |
| 11 | 8 way [Legrand/SCHNEIDER/ L&T] |
| 12 | Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment and end box. [D-10, 14][D-12,16] Incoming - 415V,63A, FPMCB Isolator [ Legrand/SCHNEIDER ] (1-nos) [ D-5,6 ] (1-nos) Outgoing - 10KA, (C-characteristics) 6-32A, SPMCB [ Legrand/SCHNEIDER ]- (18-nos) [ D-6,7 ] |
| 13 | a) 6 way [Legrand/SCHNEIDER/ L&T] |
| 14 | Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [ D-9,13 ] Incoming - 230V,40A, DPMCB Isolator [Legrand/SCHNEIDER] (1-nos) [D-5,6]Outgoing - 10KA, (C-characteristics) 6-32A, SPMCB [Legrand/SCHNEIDER] - (12-nos) [D-6,7] |
| 15 | a) 2+12 way [Legrand/SCHNEIDER/ L&T] |
| 16 | Supply of 1.1 KV Gr. 4 Core,50 sq mm PVC/ XLPE insulated Ar. Al stranded cable(Gloster/Polycab/RR Kabel/Havels) |
| 17 | Laying of cable 4 Core 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting. F-1,2.(c) |
| 18 | S/F compression type gland for cable 4 core 50 sqmm & Finishing the end with dowells solderless socket by crimping method as per GS. F-4, 7.(c) , F-5, 8.(b)(xvi) |
| 19 | Supply and Fixing 1.1 KVsingle core stranded \"FRLSLS\"PVC insulated & unsheathed single core stranded copper wire(RR Cable/Finolex/ /Polycab/KEI) as approved by EIC) of the following sizes in 20mm/25mm/32mmthePVC Rigid Conduit \"FRLS\" [Make-Precision] on wall, ceilling with saddle and other accessories as required and mending good damages to building works. |
| 20 | a) 3x1.5 sqmm ECC [ E-9,1(b) & E-16,7(a) ] |
| 21 | b) 2x2.5 sqmm+1x 1.5 sqmm ECC [ E-9,1(s) & E-16,7(a) ] |
| 22 | c) 2x4 sqmm+1x 2.5 sqmm ECC[ E-9,1(v) & E-16,7(a) ] |
| 23 | d) 2x6 sqmm+1x 4 sqmm ECC) [ E-9,1(y) & E-16,7(a) ] |
| 24 | e) 4 x 10 sqmm+2x 6 sqmm ECC) [ E-9,1(d1) & E-16,7(b) ] |
| 25 | f) 4 x 16 sqmm + 2 x 10 sqmm ECC)[ E-9,1(g1) & E-16,7(b) ] |
| 26 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [ F-5,9 ] |
| 27 | a) 2x2.5 sqmm+1x 1.5 sqmm ECC [ F-5,9(i)] |
| 28 | b) 2x4 sqmm+1x 2.5 sqmm ECC [ F-5,9(ii&i)] |
| 29 | c) 2x6 sqmm+1x 4 sqmm ECC) [ F-5,9(iii&ii)] |
| 30 | d) 4 x 10 sqmm+2x 6 sqmm ECC) [ F-5,9(iv&iii)] |
| 31 | e) 4 x 16 sqmm + 2 x 10 sqmm ECC[ F-5,9(v&iv)] |
| 32 | Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch(Make:- Anchor) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.[Vide page no-E-6, item no-22] |
| 33 | Supply & Fixing 240 V, 4 nos. 6/16A plug socket (Combo) with separate 4 nos. 20A Piano key type switch (Make:- Anchor) on sheet metal switch board embedded in wall incl. S & F 300x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. |
| 34 | Supply & Fixing 240 V, 25 A Piano key typePlug socket(Make:- Anchor) on sheet metal switch board incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required. [Vide page no-E-6item no-17(b)] |
| 35 | Supply & Fixing 240 V, 25 A, Modular type starter and 2 Module GI Modular type switch board with 2 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Make:- Legrand/SCHNEIDER/Cabtree) |
| 36 | Supplying & Delivery of250 volts, 50 Hz 1200mm (48”) sweep A.C. ceiling fancomplete with all accessories viz. down Rod, Canopy, Fork etc. including connections as reqd. as per choice of E.I.C. (Make-Crompton HS plus/ Orient Energy star) |
| 37 | 1200mm (48”) |
| 38 | Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. [ C-3,21a ] |
| 39 | Supply & Fixing Socket type fan regulator (Step type) (Anchor) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. conections etc. |
| 40 | Supplying & Delivery of 250 volts, 50Hz,sweep 1420 R.P.M. heavy duty exhaust fan complete with all accessories after making hole on wall and mending good damages as per practicable incl.(Make-EPC) as to Gs. |
| 41 | a) 300 MM (12”) |
| 42 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:[C-4,28 ] |
| 43 | a) 300 MM (12”) |
| 44 | Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron FRLSame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x 62 mm long) [D-14,33 ] |
| 45 | 30 cm Exhaust(12”) (300 MM)[D-14,33 ] |
| 46 | S&F of fully diffused Recessed mounted 2\"X2\" LED Troffer with microprismatic diffuser suitable for LED Soft Glow High efficiency light fittings for OT,ITU,ICU, CCU ( Make-Philips Cat No- RC380B LED36S-6500 G5 L60 W60 PSD OD OC Crompton cat no- LCTRH-36-WW/). |
| 47 | Supplying & fixing ofRecessed mounted 1\"X1\" ledlight fittings of 18 Watt having minimum lumen output 110 lumen/Watt with IP65 protection. (Make -Philips cat no-DN097B LED10S-6500 PSU WH /Crompton cat no- LSCSM-18W-WW) |
| 48 | Supplying & Delivery following 250 Volt, T8, 18/20 Watt, 4 Ft. long single LED Tube fittings complete with LED tube lamp in built driver&metal heat sink(LT8-20-865-(2)) having at least 100 lumen/watt and cast iron box type fittings.(Make- Philips cat no- TMC 502 P1xT-LED 22W P3241/Crompton cat no- IGP161LT8-16) |
| 49 | Supplying & Delivery following 250 Volt, T8, 18/20 Watt, 4 Ft. long single master LED Tube light having at least 100 lumen/watt .(Make- Philips cat no- TMC 502 P1xT-LED 22W P3241) |
| 50 | Supplying & Delivery 240 Volt 50 Hz, Energy saver cool day 9 watt LED lamp (B22) having at least 100 lumen/watt, as per direction of E.I.C. (Make- Philips/Crompton) |
| 51 | Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling. [ D-13,22 ] |
| 52 | Fixing only single/twin fluorescent light fitting complete with all accessories with (14 SWG) 2nos GI-Z clamps for every light Fittings on wall/ceiling of Suitable Size MS fastener, etc. |
| 53 | Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 3x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. [C-2/16] |
| 54 | Supply and fixing of 230 V Timer DBwith steel sheet enclosure double door , phosphatised powder coated , neutral bar, Din Rail with IP-43 protection. i)1 no. 25A DP MCB (\"C\" Curve, 10 kA,),(Make- Legrand/SCHNEIDER / L&T) ii) 1 no. 24 hours programmable Digital Time Switch. (Cat no:-67DDTO make:- L&T) iii) 1 no. 32 A,1-Phase Power contactor.(MNX-22,Make:- L&T )iv) 1 no. 15A, Auto/ Manual bypass Changeover Switch v) Provision for earthing attachment including LED indication light for running condition and locking arrangement. Suitable DB size selection with internal wiring 6sqmm Copper wires along withProper Connection with Cu.Socketting endto be fixed maintaining recommended clearance. as directed by EIC. (Make:-L&T/Legrand/SCHNEIDER) |
| 55 | Supply & Delivery of 65 AH, 12V Mono Block SMF type batteries, as directed by EIC. [Make-Exide, Model no-EP120-12 orAmar Raja(Quanta)] |
| 56 | Installation, Teasting, commissioning of the above batteries at site FRLSom store inclusive all sockets, wires & incl. labur etc. |
| 57 | SITC of indoor type deparmental LED GLOW SIGN Board (at 5th floor of UNB building)of dimension 5.5\" X 3.5\" X 0.5\"fabricated FRLSom 3 mm thick ACP sheet on all six sides finished with approved metallic colour & suitable size hollow Al rectangular bar as FRLSame inside the box.(Mater-NEUROSURGERY OT)SIZE-i) 5.5\"X3.5\"=19.25 sqft.x2 (FRLSont/back)=38.50 sqft ii)5.5\"X0.5\"=2.75 sqftx2(Top/bottom)=5.50 sqft iii)3.5\"X0.5\"=1.75 sqft X2 (Top/bottom) =3.5 sqft Total=47..5 sqft |
| 58 | Covering the all side of the m.s. structure incl. facia by S&F A.C.P. Sheet (Blue cover-imported quality-4 mm. thick)with rowdey cutting system incl. Providing necy. Fixing accessories suitable for alphabetic letter, as directed by EIC. |
| 59 | S&F. Acrylic letter of difft. Sizes, given below, with FRLSont razing-6mm and back 25mm after lezer cutting of poly vynyel sheet (3mm thick) of white colour in the shape of Male/ Female for fixing facility by using Chloroform and allied fixing accessories complete with difft. Types of Alphabetic letter asper design and drawing of the Authority concern , as directed by EIC. |
| 60 | Supply & Fixing of LED on the acrylic letter FRLSom backside (Make: SAMSUNG/Meanwell or equivalent) having the following specifications: COLOUR:WHITE or as per the choice of EIC., Tipe:double time fixed.LIFE:70,000 burning hours.INTENSITY: Uniform without any bright/dark patches.VISIBILITY: 50Mtrs at least for normal eye vision.AMBIENT AIR: 0-50°C; 100% Relative Humidity.POWER CONSUMPTION: 1.08 Watt per module. (1 module consists of 3 nos LED), as directed by EIC.(Defect Liability Period-2 years ) |
| 61 | Supply & Fixing MS Structure for holding LED SIGN Board 5.5\" X 3.5\" X 0.5\" by 25x25x4 angle as Vertical members & strut at back side and 25x25x4 angle and 25x6 MS flat as horizontal member including painting the MS structure and fixing with RCC foundation on the roof as per direction of the EIC. |
| 62 | SITC of Power Supply unit inclusive of water tight gaskette fitted stainless steel hinged door box. (200 watt power supply IP65, 50/60 HZ 108 to 305 VAC power supply >0.95 pf for LED lamp) Make: Meanwell/Groen(Defect Liability Period-2 years ) |
| 63 | Rate should be quoted incl. of all taxes and cess. |
| 64 | Defect Liability period : 1 year |
