Tender For Supply, Installation And Commissioning Of Laboratory Equipment (Double Beam Uv Vis Spectrophotometer) At Department Of Pharmaceutical Sciences, Dibrugarh University, Dibrugarh-Assam

Tender For Supply, Installation And Commissioning Of Laboratory Equipment (Double Beam Uv Vis Spectrophotometer) At Department Of Pharmaceutical Sciences, Dibrugarh University Microprocessor based UV-VIS Spectrophotometer with high resolution touch screen display, for operation on 220V / 50Hz.  Stand-alone operation as well as complete control through PC with PC software supplied as standard  True double beam optics with aberration corrected concave blazed holographic grating in Czerny – Turner mounting for high energy throughput and high quality monochromatic light  Wide wavelength range of 1,100 nm to 190 nm  resolution 1 nm spectral bandwidth over entire wavelength range  Wavelength setting and display in steps of 0.1nm  Wavelength accuracy of + 0.1nm for D2 spectral line  Wavelength reproducibility of + 0.1nm  Wavelength Slew rate: approx.. 29,000 nm/min  Variable wavelength scanning speed: ≥ 3,000 nm/min to 2 nm/min 29,000 nm/min when survey scanning  stray light of <0.02%T at 220nm with NaI filter  Photometric range of -4 to +4 Abs and 0 to 400 %T  Photometric Accuracy of + 0.002 Abs at 0.5 Abs  Photometric Repeatability of Less than ± 0.0002 Abs at 0.5 Abs  Baseline stability: < 0.0003 Abs/Hr (700 nm, one hour after light source turned ON)  Photometric noise of < 0.00005 Abs (700 nm)  Dual source – high intensity Tungsten-Halogen and Deuterium lamp with automatic changeover  High sensitivity matched pair Silicon Photodiode detector  4 USB ports or more for high speed PC and printer connectivity, data storage and transfer through USB pen drive  Guaranteed compliance with all Pharmacopoeia requirements  Built in validation program, diagnostic and security functions  The instrument should provide network access via wireless connectivity. Data can be transferred to a PC via a network  The instrument should have provision for Bar code reader and key board entry function: sample names and numerical values can be entered by a bar-code reader or from the keyboard  The instrument should have Sleep mode and wake up function: Analysis can start the instant the user arrives at the laboratory. The instrument should require no time to warm up.  All operational modes as standard – Photometric; Spectrum; Quantitation; Kinetics, Time Scan, DNA and Protein Quantitation in standalone and PC mode. Additionally Multi-Component measurement available in stand-alone mode.  Large sample compartment compatible with wide range of accessories.  Must supply one pair of 10mm path length Quartz Cuvettes of 3.5 ml volume as a standard supply  12 months warranty from the date of installation

INR 1000 /-

INR 15000.0 /-

Refer document