|
| 1 | Schedule of work |
| 2 | Demolition of brick work or stone/boulders masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etac but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge. |
| 3 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed by Engineer-in-charge. |
| 4 | Supply only chain link MS galvanised fencing of 4.15 mm dia, size 50x50mm and 2.40m high complete all as specified and as directed by Engineer-in-charge. |
| 5 | S&F Mild steel work as in post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting, etc and similar work conforming all as specified and directed |
| 6 | Excavation in post holes (or similar holes) trenches in soft/loose soil n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm complete all as specified and as directed by Engineer-in-charge. |
| 7 | M&L for plain cement concrete 1:3:6 type C2 using 40mm graded caggregate as in sub base and mass concrete all as specified and as directed by Engineer-in-charge. |
| 8 | S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and staining and fixing to any type of standard rails strain- ing bolts, including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins, etc.as directed (Note:- Each line wire to be measured). |
| 9 | M&L for mild steel round bars 10 mm dia and over, cut to length, bent to shape required placing in position and binding with MS wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engr-in-Charge |
| 10 | M&L for preparation of surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces complete all as specified and directed by Engr-in-Charge |
| 11 | Supply onlymild steel bolts (Machine made) with hexagonal or square head at one end and screwed the other end with washeres and one hexagonal or square nuts length of bolt but length of bolt not exc 5cm and n exc 30cm long and dia of shank 5 to 10mm complete all as specified and directed by Engr-in-Charge |
| 12 | S&F in repair punched typeconcertina coil 600 mm diacomplete all as specified and as directed by Engg-in-charge. |
| 13 | Taking down cementplaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc complete all as specified. |
| 14 | M&L for 15 mm thick rendering in cement mortar 1:4 by on fair faces of brick work or concrete surfaces, including finishing even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 15 | M&L for preparation for newly plastered surface of wall and applying two coat of cement base paintover a coat of primer on walls complete all as specified and as directed by Engineer-In-Charge. |
| 16 | M&L for sand filling under floors or in foundations including watering and consolidation for 50mm thick complete all as specitied and as directed. |
| 17 | MaL 60mm thick Machine pressed precast concrete inter locking paver block M-35 de any shape and size with Grey cement and no pigment conforming to IS 15658-2006 over sand cushioning as specified and as directed |
| 18 | Surface excavationn. exc 30 cm deep and getting out in Soft / loose soil complete all as specitied and as directed. |
| 19 | Hardcore of broken stone or boulders gauge n exc. 63 mm deposited spread levelled in layers n exc 15 cm thick watered and rammed to a true surface all as specified and as directed. |
| 20 | M&L 100 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base offloor complete all as specitied and as directed. |
| 21 | Removal of debris/malwa to a distance exc 10 Km but n exc 15.00 Km out side MD land and filling in low lying area complete all as specitied and as directed. |
| 22 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete complete all as specitied and as directed. |
| 23 | M&L for applying two coat weather/dust proof paint in Strips exc 15 cm, over a coat of primer including preparation of new Kerb stone/plastered wall surfaces complete all as specitied and as directed. |
| 24 | M&L for MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specitied and as directed. |
| 25 | Cutting holes in brick walls in cement mortar for inserting holdfasts exc half brick but n exc one brick and making good dismantled portion in cement mortar 1:3 or plain cement concrete 1:2:4 Type B-1 as required complete all as specitied and as directed. |
| 26 | Note:- The amount of Rs 20,000/- against Schedule of Credit on Page No 128 shall be deducted from the total amount quoted against Sch \"A\"while deriving the Contract Sum for Acceptance |
