Tender For Renovation Of Conference Hall And Gm Hss Cabin At First Floor Of Isg Building Ecil Hyderabad - 1 1 Removing of existing PVC flooring etc., complete and as directed by Engineer-in-charge. 110.000 Sq.Metr NA 2 2.1 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm 110.000 Sq.Metr NA 3 3.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 10.000 Sq.Metr NA 4 4 Dismantling of existing fixed MS glass/weld mesh/cement asbestos / other hand board partition including door window fittings etc., by welding, cutting, disposal of unserviceable material within 1 KM lead etc., complete and as directed by Engineer-in-charge. 82.000 Sq.Metr NA 5 5.1 Wall painting with premium acrylic emulsion paint of interior grade, VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour Two coats 310.000 Sq.Metr NA 6 6.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. Make: Asian / Nippon / Berger Water thinnable cement primer 780.000 Sq.Metr NA 7 7 Supply and fixing of roller type venetian blinds ( design / code no.5079-8) or as per user s requirement with necessary accessories and approved colour etc., complete and as directed by Engineer-in-charge. 60.000 Sq.Metr NA 8 8 Supplying and laying of armstrong/daiken false ceiling tiles of 600x600x14mm size after removing the damanged tiles from the existing false ceiling etc., complete and as directed by Engineer-in-charge. 60.000 Each NA 9 9.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) 20.000 Cu. Metr NA 10 10.1 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) 240.000 Sq.Metr NA 11 11 Removing of eixisting roller type blinds etc., complete and as directed by Engineer-in-charge. 9.000 Sq.Metr NA 12 12 Refixing of existing roller type blinds with necessary accessories like screw and other fittings etc., complete and as directed by Engineer-in-charge. 9.000 Sq.Metr NA 13 13.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) 55.000 K.G.s NA 14 13.2.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) 50.000 K.G.s NA 15 14.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) 22.000 Sq.Metr NA 16 15 Providing etching on 4mm / 5mm thick float glass etc., complete and as directed by Engineer-in-charge. 22.000 Sq.Metr NA 17 16 Providing and fixing powder coated aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coated aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). 50.000 K.G.s NA 18 17.1 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 120.000 Sq.Metr NA 19 18.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work 1100.000 Sq.Metr NA 20 19 Labour charges for repairing of exisiting false ceiling grid, straightening the L-angles, T-angles and GI wire with necessary screws etc., complete and as directed by Engineer-in-charge. 19.000 Sq.Metr NA 21 20 Providing and fixing aucoustic wall paneling made out of 600x600 mm grid frame with good quality salwood of 50x50mm cross section and fixing 12mm thick waterproof, termite proof green ply/tru ply make on one side of grid frame work, filling the gap with mineral fibre glass wool of 28 density, closing it with mineral fibre tissue paper and fixing 1mm thick decolam of approved colour and make of royal touch or equivalent on plywood top fixing with fevicol and necessary screws (nailing not allowed) including cost of cornices/bands, conveyance of material and labour etc., complete and as directed by Engineer-in-charge. 135.000 Sq.Metr NA 22 21 Providing and fixing of ACP sheet 4mm thick with necessary scres, fitting including structural steel work in single section, fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc., complete and as directed by Engineer-in-charge. 8.000 Sq.Metr NA 23 22 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Make: Birla white / Star / Saint gobian. 45.000 Sq.Metr NA 24 23 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete 410.000 Sq.Metr NA 25 24.1 Distempering with 1st quality acrylic distemper (ready made) VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete. as per manufacturer s specification. One or more coats on old work 410.000 Sq.Metr NA 26 25 Providing and fixing of Daiken / Armstrong mineral fibre false ceiling with hot dipped galvanized steel grid work, surface chemically cleaned capping perfectly pre finished in baked polyster paint, main tees of size 33x24x0.5mm thick at every 1.2 m centre to centre perimetre with L-angle 24x24x0.5mm thick to form a grid of size 600x600mm and suspending the grid from RCC roof using 12 guage GI wire and rawl plug at every 1200mm intervals wherever required and laying Daiken/Armstrong mineral fibre acoustic ceiling tiles pattern of size 600x600x14mm over the formed grid etc., complete and as directed by Engineer-in-charge. Note: False ceiling tiles not laid at the place of electrical fittings should be handed over to department (ECIL). 60.000 Sq.Metr NA
