Tender For Equipments For Research Project Purpose Of Physics Department Of Vssut, Burla., Burla-Odisha

Tender For Equipments For Research Project Purpose Of Physics Department Of Vssut, Burla. Name of instrument/ No. Equipment 01 M-E. Setup Specification Technical Specification:- i. Field - 5000 gauss or more ii. Pole gap-80 mm iii. Pole diameter-2 inches (50mm) iv. Magnet diameter-08 inches v. Resolution 10 gauss vi. Construction-U frame with Thermal protection, Air cooled vii. Bipolar Power Supply - 40V, 5 amps viii Input-220V/440VAC 50Hz ix. Stability-1% x. Overload protection xi. Thermal shut off xii. Hall probe with display unit AC Field coils xiii. Bipolar AC Input amplifier 0-12 Volts xiv. Current: 500 mA XV. Function generator for frequency wave form sine wave xvi. Amplitude control xvii. Sample holder for pellet type samples of thickness 1-2.5 mm 02 Furnace 1 Technical Specification:- i. Type: Muffle furnace ii. Maximum operation temperature (°C): 1400 °C iii. Continuous working temperature (C): 1300 C iv. Hot zone dimension (HxWxD in mm): 125 x 125 x250 v. Body type: Dual body structure vi. Door: Leak proof swing aside type door with door safety switch vii. Insulation: Dual wall insulation viii. Input power: Single phase, 230 volts, 2 wire, 4.5 kW ix. Heating rate: 10°C/min x. Temperature Uniformity: +/-5 Deg C xi. Temperature Accuracy: +/-1 Deg C xii. Heating elements: Silicon carbide heating elements xiii. Thermocouple type and number: R type (Duplex for control and safety) xiv. Temperature controller: Digital temperature controller with PLC System, PLC-SEED, HMI-EXOR, PID xv. Over Temperature Limiter: Temperature limiter for thermal safety of heaters and insulation from temperature overshoot. xvi. Thyristor Unit: Thyristor power controller with soft start/stop and power limit facility xvii. Control Switch: to switch control on/off xviii. Indicators: LED indicator for load and line conditions xix. Ammeters: Digital ammeter to indicate load current XX. MCB: For over current and short circuit protection to the circuit xxi. Safety Features: Over current protection, short circuit protection, over temperature protection plc 3 Furnace 2 ii. Maximum operation temperature (C): 1100 C iii. Continuous working temperature (°C): 1000 °C iv. Hot zone dimension (HxWxD in mm): 100 x 100 x225 v. Heating rate: 10°C/min vi. Temperature Uniformity: +/- 1 Deg C vii. Temperature Accuracy: +/- 5 Deg C vii. Body: Powder coated dual body structure ix. Door: Leak proof swing aside type door with door safety switch x. Insulation: Dual wall insulation xi. Input power: Single phase, 230 volts, 2 wire, 2.7 kW xii. Heating elements: Kanthal Al heating elements xiii. Thermocouple type: K type (Duplex for control and safety) xiii. Temperature controller: Digital temperature controller with PLC System, PLC-SEED, HMI-EXOR, PID xiv. Over Temperature Limiter: Temperature limiter for thermal safety of heaters and insulation from temperature overshoot. xv. Thyristor Unit: Thyristor power controller with soft start/stop and power limit facility xvi. Control Switch: to switch control on/off xvii. Indicators: LED indicator for load and line conditions xviii. Ammeters: Digital ammeter to indicate load current xix. MCB: For over current and short circuit protection to the circuit xx. Safety Features: Over current protection, short circuit protection. over temperature protection 4 Hot Air Oven Technical Specification:- i. Chamber Volume: 80 Ltrs ii. Controller: Microprocessor PID controller (with timing function). iii. Material of construction: Polished stainless-steel chamber with Uniform distribution of air temperature Convection. iv. Temperature range: RT+10°C-300°C v. Temperature accuracy: ±1°C vi. Display resolution: 1°C vii. Removable Shelves (Nos): 2-3 No.s SS removable shelves viii. Power supply: 220 V, Single phase AC supply with 50Hz frequency, ix. Air Circulation: Motorized Blower for forced air circulation to maintain uniform temperature and stability x. Temperature controller: Microprocessor based PID Programmable with Auto Tuning, delayed start/stop and calibration feature xi. Insulation: High grade Glass wool insulation xii. Type of Display: LED xiii. Power supply: 220 V, 50 Hz Single Phase xiv. Insulated door with Locking Facility 5 Digital Balance Technical Specification:- 1. Capacity: 220 g ii. Readability: 0.001 g iii. Tare range (subtractive): 220 g iv. Response time (avg): 1.35 v. Repeatability: <0.001 g vi. Linearity: 0.002 g vil. Pan (diameter): 115 mm viii. Housing (W x D x H): 230x310x305 mm ix. Net weight approx.: 4.9 kg

INR 1000 /-

Refer document

Refer document