|
| 1 | PART -A(Erection of GI Pole) |
| 2 | Supplying and erection of 7 Mtrs long continously tapered octagonal pole (bolt fixing type) in single section with single longitudinal weld &galvanizedhaving top dia 70MM as perfollowing specification:- |
| 3 | (a) Top dia - 70mm(b) Bottom dia - 130 mm(c) Thickness of sheet - 3mm (d) Base plate size - 220mm X 220 mm X 12mm(e) The pole shall be complete with following :- Set of foundation bolts -4 nos, 20mm dia, 600 mm in length complete with anchor plate. The foundation bolt shall be hot dipped galvanised.(f) Integral junction box duly hot dipped galvanised complete with door and locking arrangement as required. |
| 4 | Supplying and fixing of 4 Pole,3 phase 63 Amp heavy duty connector bolt type withbakelite sheet MCB din rail in the existingjunction box of the octagonal pole (as per item No 1) etc as required |
| 5 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.A) All kinds of soil |
| 6 | Providing and laying in position concerte 1:2:4 ( 1 cement: 2 coares sand: 4 graded stone aggregate 20 mm nominal size) in foundation of pole etc including from work etc as required.Size of foundation of pole |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :Foundations, footings, bases of columns, etc. for mass concrete |
| 9 | PART -B(Fitting and Accessories) |
| 10 | Providing and erection of channeled shaped Flood Lighting Bracket of required size (To be appoved by Engg-in-charge) suitable for mounting of flood lighting luminaire on polygone (8 sides) cross section, octagonal type, 7 Meter height pole with 04 Nos 18 mm dia symmetrically located holes / slots including providing and fixing matching G.I nuts-bolts and washers required for fixing the bracket on the pole as per specifications. |
| 11 | Providing and fixing of 100 watt LED flood light made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP66 protection, system efficiency >110/120LPW, 10KV SPDversion to be ordered separatelyincluding connection, testing commissioning etc as required. |
| 12 | S/L of 3 Core cable 1.5 sqmm size of PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to IS 694 : 2010 from looping box to light fitting including interconnection with connector,testing complete etc as required |
| 13 | PART -C (Panel and Accessories ) |
| 14 | SITC of various sizes water protected outdoor (Water proof)huttype compartmentalized type double door cubical panelboth side opening havingdepth up to 600 mmsuitable for 415 Volt, 3 phases, 50 Hz made out of 2mm thick CRCA sheet with required hardware duly painted with powder coated .Panel having separate detachable gland plate, end terminaion as per cable of size,angle iron base frame made out of 50mmx50mmx5mm angle iron of suitable size of the feeder pillar (minimum height 60cm), hinged door, both side opening with locking arrangement, earth bar/stud, led pilot light for phase indicator (R,Y,B) on top, 400A/415V 4 strip aluminum bus bar duly PVC sleeved, connection inter–connection with 25% extra current carrying capacity busbars to MCCBs spreader links and with solid copper conductor cable 10 sqmm/ solid aluminium rodfor connection toMCBs and heavy duty connectors of required current carrying capacity to be fixed back side including incoming/Outgoing cables connection for three and single phaseMCBs where as required, testing on loadand marking of location for incoming and out going distribution i/c grouting the legs in existing floor with 1:3:6 cement concrete foundation and dsimantling the existing panel, incoming/outgoing cable connections etc complete as required i/c dismentling the existing feeder pillar and UG cable. (Panel should beas per design &drawing approved by Engg in charge).LED light min 5 watt with on/off switch to be provided in the panel. |
| 15 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required a) Double pole |
| 16 | Providing And Fixing Of63 Amp MCCB three pole Breaking Capacity10 ka with spreader linksfor ACThreephase, 415 vIcs=100% Icu,EZC Fixed thermal Magnetic trip unit (TMD) as per details specification in new LT panel(item No 14) and making inter connections with busbar as per the detail specifications mentioned inabove new panel item etc as required |
| 17 | Providing And Fixing Of40 Amp MCCB three pole Breaking Capacity10 ka with spreader for ACThreephase, 415 vIcs=100% Icu, EZC Fixed thermal Magnetic trip unit (TMD) as per details specification in new LT panel(item No 14) and making inter connections with busbar as per the detail specifications mentioned inabove new panel item etc as required |
| 18 | PART -D (Earthing) |
| 19 | Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
| 20 | Providing and laying earth connection from earth electrode with 6 SWG gia G.I. wire in 15 mm dia G I Pipe from earth eletrode including connection with G.I. thimble excavation and filling as required |
| 21 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 22 | PART -E ( Cabling ) |
| 23 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. complete as required. |
| 24 | a) 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 25 | Supplying and Laying of 1 No 2 x 6 sq mm unarmoured PVC insulated /PVC sheathed /XLPE power cable of 1.1 KV Grade, in the open duct as required . |
| 26 | Supplying and laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of alluminume armoured 4 X 16 sqmm direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. |
| 27 | Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of alluminume armoured 4 X 16sqmm in the existing RCC/ HUME/ METAL pipe as required. |
| 28 | Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade (heavy duty )armoured UG electric cable with aluminium conductor of size 4X 16 sq.mm. (clamped with 1 mm thick saddle) on wall surface as required. |
| 29 | Supplying and laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of alluminume armoured 3.5 X 35 sqmm direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. |
| 30 | Supplying and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of alluminume armoured 3.5 X 35sqmm in the existing RCC/ HUME/ METAL pipe as required. |
