|
| 1 | Earth work in excavation of foundation trenches or drains,in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m. asdirected. The item includes necessary trimming thesides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.For i)Boundary Wall Foundation, ii)For Footings of Gate |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layercomplete.1/5th Volume of Item no.1 |
| 3 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement offinished quantity). i)For Boundary Wall Footings, ii)For main gate Footing |
| 4 | Supplying and laying Polythene sheet(150gm/sq.m) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches, i)For tie beam Bottom |
| 5 | Hire and labour charges forb shuttering of requisite thickness inclusive of staging for structural members viz concrete floor/roof slabs columns beams lintels fitted and fixed in position including horizontal runners horizontal diagonal bracing providing stone vertical props and striking out carefully aftercompletion of work (height of props upto 4m) |
| 6 | Nominal Mix Cement concrete with graded stone chips(20mm size) Excluding shuttering and reinforcement if any |
| 7 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking andbending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection,complete as per drawing and direction |
| 8 | Cement Plaster to wall floor ceiling etc. with sand and cement morterincluding rounding off chamfering corners as directed and racking out joint of roughening of concrete surface G.floor |
| 9 | M.S. gate of Jail type as per approved design made of strong M.S.frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc.including necessary riveting,bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge. |
| 10 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conformingto IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-inchargecomplete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section,consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidentalchages such as electricity charges, labour insurance charges |
| 11 | Supplying fitting and fixing I.R.C. fabric mesh with covering battens includingcost of screws etc complete (excluding the cost of battens). |
| 12 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary On steel or other metal surface : With super gloss (hi-gloss) -Two coats (with any shade except white) |
| 13 | GST applicable @18% |
| 14 | Labour Cess Applicable @1% |
