}

Repairing / Renovation Of Electrical And Mechanical Equipments Of Tube / Well Installed At Zeenat Mahal School., Delhi-Delhi

Delhi Jal Board has published Repairing / Renovation Of Electrical And Mechanical Equipments Of Tube / Well Installed At Zeenat Mahal School.. Submission Date for this Tender is 01-09-2023. Storage Chests and Cabinets and Trunks Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

39290986
Repairing / Renovation Of Electrical And Mechanical Equipments Of Tube / Well Installed At Zeenat Mahal School.
Open Tender
Indian
Delhi
Delhi
01-09-2023

Tender Details

Repairing / Renovation Of Electrical And Mechanical Equipments Of Tube / Well Installed At Zeenat Mahal School.- 1 Supply Of Panel Board Suitable For 415 Volts, 3 Phase, 50 Hz, 4 Wire System For Operation Of 10-15Hp Submersible Pump Set With Automatic Phase Corrector, Made Out Of 2Mm Thick Crca Sheet For Load Bearing Members, Totally Enclosed, Powder Coated Free Standing, Floor Mounted Type, Dust& Vermin Proof, Outward Opening, Lockable Doors Having Hidden Hinges And A Bolted Back Cover Both Using Non-Deteriorating Neoprene Rubber Gaskets. Each Part Of The Fabricated Panel Will Be Strictly Subjected To Seven Tank Treatments. The Various Components, Assemblies And Sub Equipment Of The Panel Will Be As Per Standard Given In Relevant Is. The Bus Bar Shall Be Aluminum Rectangular Cross Section Size 20 Mm X 5 Mm Strip Per Phase, Rating 100 Amp. The Panel Will Be Shaped Out Of High Conductivity, Electrolytic Conductor And Shall Be Liberal Sized. The Bus Bar Will Be Covered With Heat Shrinkable Pvc Sleeve Throughout In Red, Yellow & Blue Color To Identify Three Phases & Black For Neutral. The Bus-Bar Support Insulator Made Of Non-Deteriorating, Vermin Proof, Non-Hygroscopic Materials Such As Smc / Dmc. The Control Wiring Of The Panel Will Be Done With Pvc Flexible Copper Wires Of 1.5Mm Cross Section. Each Wire Will Be Terminating With A Copper Ferule Crimped To The Wire. The Panel Will Have Ms Angle Stand In 50X50x5mm Size. Size Of Panel 1360 Mm ( H ) X 760 Mm ( W ) 300Mm ( D ) .Having Mccb 63Amp. 415V, 50Hz 18 Ka Tpn Of High Breaking Capacity, 1 No., Power Contactor 220V 32Amp. - 3 Nos. ( With Aux Contact Block ) , Thermal Overload Protection Relay 9 - 15 Amp. - 01 No., Star Delta Timer - 01 No., Digital Timer Switch - 01 No., Motor Protection Relay ( Under Voltage / Over Voltage / Under Current / Dry Run / Single Phase Preventer ) 8 - 22 Amp. - 1 No, Capacitor Unit - ( 5 ) Kvar - 1 No., Indicating Lights Ryb - 6 Nos., On-Off - 1 Set, Amp. Meter Digital 0 - 50A Size 96 X 96 Mm - 1 No., Volt Meter ( Digital Type ) 0 - 500V Size 96 X 96Mm - 1 No, Controls Mcb Tpn 32 Amp. - 1 No., Mcb Sp 32 Amp. - 1 No., Amp. & Volt Meter Selector Switches - 1 Set, ( Auto Manual Reset, 2Co Contact ) - 1 No. Change Over Switch - 1 No., Terminal Block 6 - Way - 1 No., Make Of Accessories: - Mccb / Mcb: - L&T / Siemens / Havells, Power Contactor: - L&T / Siemens, Timer / Relay: - L&T / Siemens, Switchs / Push Button: - L&T / Siemens / Havells, Amp / Volt Meter: -Ae / L&T, Indicating Lights: - Havells / L&T 2 Supply Of Pvc Insulated Pvc Sheathed, Copper Conductor ( Flexible ) Flat Cable, Size 3 Core X 6 Sq Mm , 1100 Volts, Conforming To Is 694. Make: - Havells / Finolex / Polycab / Any Djb Approved 3 Supply Of Lt Power Aluminum Cable, Solid Xlpe, Insulated Pvc Armoured 650 / 1100 Volts, V-Grade As Per Is 7908 Part-I 1988 Size 3.5 X 25 Sq Mm. Make: - Havells / Finolex / Polycab / Any Djb Approved 4 Supply Of Kit Kat Board Made Out Of Wooden Having 3 Nos. 100 Amp ( 415 Volts Re-Wireable ) Kit Kat Of Havells / Standard / Djb Approved Make. 5 Insulating Mats For Electricial Purpose Confirming To Is 1562 / 2000 Of Following Sizes, 3Mm Thickness Sor ( E&M ) Item Code 22.5.3 6 Led ( Tube Light ) Decorative Ultra Slim Square Profile Led Lighting Fixture With Extruded Polycarbonate, Environmental Friendly, Energy Efficient Ready To Use Pack. Lamp Type Order, 20 W Led 6000 K, Sor ( E&M ) Item Code 19.1.2 7 Supply Of 80Mm Dia. B Class Gi Pipe Length 3 Mtr. With Duly Welded And Threaded Flange In Both Sides, Complete With Cutting Of Flange For Cable And Welded Support In Both Flanges As Per Site Requirement. Make: - Jindal / Parkash / Surya / Tata. 8 Supply Of G.I. Tail Piece Medium Class Of 0.5 Mtrs Long Including One End Flanged And Another End Threaded Of 80Mm As Per Site Requirement. 9 Supply Of 80Mm Dia. Gi Bend With Both Side Flanges Duly Welded And Threaded As Per Site Requirement. 10 Supply Of M.S. Clamp Of Ms Strip Duly Hole For Holding The Pipe Of 80Mm Dia. With Nut Bolts And Washer. 11 Supply Of M.S. Bore Cover Made Out Of Ms Plate Suitable For 12 / 14 Dia. Bore Complete With Suitable Hole For Passing The 80Mm Dia. Gi Pipe 12 Supply Of Nut Bolts, Washer Of Good Quality As Per Requirement 13 Supply Of Rubber Packing Sheet With 50 % Neoprene ( 1.5 Mm To 25 Mm ) Isi Mark. ( Payment Will Be Made As Per Actual ) . Sor ( E&M ) Item Code 22.6.1 14 Fabrication / Supply Of Venturi Assembly 80 Mm Dia. With Complete Accessories As Required At Site. 15 Supply Of Electrical Dozing Pump ( 4Lph, 5.5 Kg / Cm, Supply Chemical Grade Tank Of 100Ltrs With Nrv, Foot Valve With Nrv, Injector Valve And Tube ( Pipe ) Etc Make:- Clormax / Milton Roy 16 Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bellpoint With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductorsingle Core Cable In Surface / Recessed Medium Class Pvcconduit, With Piano Type Switch, Phenolic Laminated Sheet, Suitable Size M.S. Box And Earthing The Point With 1.5 Sq.Mm.Frls Pvc Insulated Copper Conductor Single Core Cable Etc. Asrequired. Sor ( E&M ) Item Code 31.8.3 17 Workmanship Charges For Lowering The Submersible Pump Set One No. In New Bore Well, Fixing / Erection / Installation Of E&M Equipment, Accessories, Testing And Commissioning On Load With Satisfactory Functioning Of Pump. The Work Includes All Sundry Required Items For Completion Of Work, I.E., Eccentric Taper, Rubber Gasket, Necessary Reinforcement And Vibration Isolation Arrangement, Etc. And Loading, Unloading, Cartage, Making Good All Damages Caused During Installation And Restoring The Same To Their Original Finish As Required, Adequate Safety Provision, Barricading, Warning Signal And Other Safety Measures While Executing The Work Or Wherever Necessary So As To Avoid Accident. The Components Of The Installation Shall Be Of Such Design So As To Satisfactory Function Under All Conditions. The Tube Well Will Be Commissioned On Automation Mode And Timing To Be Set As Per Direction Of Engineer-In-Charge. The All-Sundry Items Which Are Useful & Necessary For Operation Of Tube Well In Automation Mode Shall Be Deemed To Have Been Included, Whether Such Items Are Especially In Specification Or Not. ( Deep Well Submersible Pump Set And Rccb Provided By The Department )

Key Value

Document Fees
INR 500 /-
EMD
INR 4400.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail