|
| 1 | Supply, erection and commissioning of 10 Cs. V.T. Axial flow pumps of 1440 RPM, having static lift of 13 feet, including 12 mtr. delivery pipe as per actual site requirement and MS delivery bends of minimum 8 mm thickness with bituminous based paint inside & outside including flange welding, nut-bolts, Siphon Breaker Valve, complete in all respect, as per site and as per approved technical specifications. (For PH-160000 J/F, Kairu Mr. P.H. No. 1&3 ). |
| 2 | Supply, erection and commissioning of 5 Cs. V.T. Axial flow pumps of 1440 RPM, having static lift of 13 feet, including delivery pipe as per actual site requirement and MS delivery bends of minimum 8 mm thickness with bituminous based paint inside & outside including flange welding, nut-bolts, Siphon Breaker Valve, complete in all respect, as per site and as per approved technical specifications (ForPH- 160000 J/F, PH-RD 3650 L Dinod Mr.) |
| 3 | Supply, erection and commissioning of solid shaft motor of capacity 50 HP of 4 pole, 1440 RPM, 3 phase 415 Volt with efficiency class IE2 (as per IS 12615 with latest amendments) suitable for 10 Cs. VT Axial flow pumps with 13 feet lift type vertical flange mounted & as per approved technical specification with earthing of motor (PH-RD 160000 J/F ). |
| 4 | Supply, erection and commissioning of solid shaft motor of capacity 30 HP of 4 pole, 1440 RPM, 3 phase 415 Volt with efficiency class IE2 (as per IS 12615 with latest amendments) suitable for 5 Cs VT Axial flow pumps with 13 feet lift type vertical flange mounted & as per approved technical specification with earthing of motor (For PH-160000 J/F, PH-RD 3650 L DinodMr) |
| 5 | Supply, erection and commissioning of 60HP Fully Automatic ATS Starter with MCCB of 250 Amp. Capacity with all accessories along with an-addl. MCCB of 63 Amp. for lighting loads, Indicators, Relay, Meters, Push buttons, bus bars, timers etc. with contactor rating as 110, 80, 50 Amp. with first filling of oil (if oil cooled ATS used) starter should have individual capacitor bank of 25 KVAR capacity coupled through 63 Amp. MCCB and timer with digital display instruments & other allied accessories for automatic as well as manual operation, complete in all respect with a stand of MS Channel (1feet up from floor) with latest amendments suitable for 10 Cs. Axial flow pumps and as per approved technical specifications With earthing. (For PH-160000 J/F, P.H. No. 3 Kairu Mr.). |
| 6 | Supply, erection and commissioning of 30HP Fully Automatic ATS Starter with MCCB of 160 Amp. Capacity with all accessories along with an-addl. MCCB of 63 Amp. for lighting loads, Indicators, Relay, Meters, Push buttons, bus bars, timers etc. with contactor rating as 110, 80, 40 Amp. with first filling of oil (if oil cooled ATS used) starter should have individual capacitor bank of 16 KVAR capacity coupled through 63 Amp. MCCB and timer with digital display instruments & other allied accessories for automatic as well as manual operation, complete in all respect with a stand of MS Channel (1feet up from floor) with latest amendments suitable for 5 Cs. Axial flow pumps and as per approved technical specifications With earthing(For PH-160000 J/F, PH-RD 3650 L DinodMr). |
| 7 | Supply, erection and commissioning of Hollow shaft motor of capacity 50 HP of 4 pole, 1440 RPM, 3 phase 415 Volt with efficiency class IE2 (as per IS 12615 with latest amendments) suitable for 11 Cs. VT Axial flow pumps with 13 feet lift type vertical flange mounted & as per approved technical specification with earthing of motor. (For Kairu Mr. P.H. No. 1,2&3). |
| 8 | Supply, erection and commissioning of solid shaft motor of capacity 60 HP of 6 pole, 970 RPM, 3 phase 415 Volt with efficiency class IE2 (as per IS 12615 with latest amendments) suitable for 15 Cs. VT Axial flow pumps with 13 feet lift type vertical flange mounted & as per approved technical specification with earthing of motor. (For Kairu Mr. P.H. No. 1). |
| 9 | Supply, erection and commissioning of LTDB Panel of 400 Amp. Capacity with all accessories as one incomer ACB 4 pole 400 Amp. with 3 No. outgoing each of having MCCB of 200 Amp. along with an-addl. MCCB of 63 Amp. for lighting loads, Indicators, Relay, Meters, Push buttons, bus bars and with 3 No. Fully Automatic ATS Starters (Completed in all respect like relays, indicators timer etc.). of 50 HP Motors each with MCCB of 200 Amp. with contactor rating as 110,80,50 Amp. with first filling of oil (if oil cooled ATS used). The LTDB should be as per approved design of HID at Annexure C with a stand of MS channel (1 feet up from floor) and as per approved technical specification with earthing. (For Kairu Mr. P.H. No.1) |
| 10 | Designed capacitor bank of60 KVAR capacity with 8 step APFCR, digital display instruments & other allied accessories for automatic as well as manual operation of capacitor bank suitable for 3 Nos. 50 HP motors. Each Stage should have separate protection through MCCB. One No. Incomer MCCB of 200 Amps to be provided for Capacitor Bank. The said capacitor bank to be coupled with item No. 9 |
| 11 | Supply, erection and commissioning of LTDB Panel of 400 Amp. Capacity with all accessories as one incomer ACB 4 pole 400 Amp. with 2 No. outgoing each of having MCCB of 200 Amp. along with an-addl. MCCB of 63 Amp. for lighting loads, Indicators, Relay, Meters, Push buttons, bus bars and with 2 No. Fully Automatic ATS Starters (Completed in all respect like relays, indicators timer etc.). of 50HP Motors each with MCCB of 200 Amp. with contactor rating as 110,80,50 Amp. with first filling of oil (if oil cooled ATS used) starter with designed capacitor bank of 60 KVAR capacity with 8 step APFCR, digital display instruments & other allied accessories for automatic as well as manual operation of capacitor bank suitable for 2 Nos. 50 HP motors. Each Stage should have separate protection through MCCB. One No. Incomer MCCB of 200 Amps to be provided for Capacitor Bank. The LTDB should be as per approved design of HID at Annexure C. with a stand of MS Channel (1 ft. Up from floor) & as per approved technical specification with earthing. (For Kairu Mr. P.H. No. 2 & 3). |
| 12 | Supply, erection and commissioning of solid shaft motor of capacity 30 HP of 4 pole, 1440 RPM, 3 phase 415 Volt with efficiency class IE2 (as per IS 12615 with latest amendments) suitable for 5 Cs VT Axial flow pumps with 18.5 feet lift type vertical flange mounted & as per approved technical specification with earthing of motor including cost of stool, thrust bearing housing, line shaft, coupling, bolts etc to be replaced for necessary arrangement for coupling solid shaft motor in place of hollow shaft motor (complete in all respect as per site requirement to run the pump and motor) (Dang Minor PH & L- Dang Minor PH). |
| 13 | Supply, testing, erection and commissioning of 500 KVA liquid cooled diesel generator-generating set, Genset,DG set of capacity 500 KVA with noisecontrolled devices acoustic of suitable rating, with AMF control panel (KOELgreen electro) of installation, running, earthing, foundation for DG set, with incoming and outgoing cables etc complete in all respect (For Kairu Mr. P.H. No. 1). |
| 14 | Supply, erection and commissioning ofLT Power cable – LT Power Cables 3 Core X 35 mm2Copper ConductorXLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured (Galvanized steel strip), Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 with Copper thimble, nut & bolt and other allied material completed in all respect (RD – 160000 PH). |
| 15 | Supply, erection and commissioning ofLT Power cable – LT Power Cables 3 Core X 50 mm² Copper ConductorXLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured (Galvanized steel strip), Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 with Copper thimble, nut & bolt and other allied material completed in all respect(For Kairu PH 1, 2, 3, RD 3650 L Dinod Mr. P.H, RD 160000, Dang P.H & L Dang P.H). |
| 16 | Supply, erection and commissioning ofLT Power cable – LT Power Cables 3 Core X 70 mm² Copper ConductorXLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured (Galvanized steel strip), Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 with Copper thimble, nut & bolt and other allied material completed in all respect (For Kairu PH 1 & 3). |
| 17 | Supply, erection and commissioning ofLT Power cable – LT Power Cables 3 Core X 120 mm² Copper ConductorXLPE Insulated, Cores Laid Up, PVC Inner sheathed, Armoured (Galvanized steel strip), Extruded PVC Type ST2 Outer Sheathed, 650 V/1100 V Grade as per IS 7098 with Copper thimble, nut & bolt and other allied material completed in all respect (For Kairu PH 1, 2 & 3). |
| 18 | Supply, erection and commissioning of MS Girder – Parallel Flange Section (Conforming to IS808:2021) size ISMB 200 X 100with primer and Bituminous Based Paint inside & outside.Note : 1. Removal of existing VT axial flow Pumps with Motors and after commissioning of work again installation of the same (VT axial Flow pumps with motors) will be complete by the agency in all respect including any kind of civil work (For Kairu PH 1, 2, 3, RD 3650 L Dinod Mr. P.H, RD 160000). |
| 19 | Supply, erection and commissioning of MS Delivery pipe 258.9 mm inner Dia. ( in approx. 6 meter per pipe) and each pipe of 8 mm thickness both ends welded with flange made MS plate as per approved specification including HT Nut and bolts, rubber sheet andother fitmet accessories |
