|
| 1 | Vernier Caliper with fine adjustment Screw, Size-300mm, Make- Mitutoyo |
| 2 | Vernier Caliper digital, Size-300mm, Make- Mitutoyo |
| 3 | Surface Block with adjustable screw, Size- 12 Inch, Make- Mitutoyo |
| 4 | Flat File Rough bastard cut, Size- 14 Inch, Make- J.K (J.K Super drive) |
| 5 | Flat File Rough smooth cut, Size- 14 Inch, Make- J.K (J.K Super drive) |
| 6 | Half Round File Rough, Size- 14 Inch, Make- J.K (J.K Super drive) |
| 7 | Square File Rough bastard cut, Size- 14 Inch, Make- J.K (J.K Super drive) |
| 8 | Triangular File Rough bastard cut, Size- 6 Inch, Make- J.K (J.K Super drive) |
| 9 | Outside Caliper S.S, Size- 6 Inch, Make- Sumit Tools |
| 10 | Inside Caliper S.S, Size- 6 Inch, Make- Sumit Tools |
| 11 | Steel Rule- 300 mm for industrial use, Make- Freemans |
| 12 | Measuring Tape- 5 Mtr, Make- Freemans |
| 13 | Measuring Tape- 3 Mtr, Make- Freemans |
| 14 | Painting Brush, Size- 3 Inch, Any Good Quality |
| 15 | Painting Brush, Size- 5 Inch, Any Good Quality |
| 16 | Painting Brush, Size- 6 Inch, Any Good Quality |
| 17 | H.S.S Tool Bit, Size- 1” x 8”S-500 , Make- Miranda |
| 18 | H.S.S Tool Bit, Size- 1/2” x 6”S-500 , Make- Miranda |
| 19 | H.S.S Tool Bit, Size- 3/8” x 6”S-500 , Make- Miranda |
| 20 | Power Hexa Blade H.S.S 6 T.P.I, Size- 350 x 32 x 1.60mm, Make- Miranda |
| 21 | H.S.S Center Drill, Size- 5mm , Make- Addison |
| 22 | H.S.S Drill Tapered shank, Size- 5/8 Inch, Make- Addison |
| 23 | H.S.S Drill Tapered shank, Size- 10.7 mm, Make- Addison |
| 24 | H.S.S Drill Tapered shank, Size- ¾ Inch, Make- Addison |
| 25 | H.S.S Drill Tapered shank, Size- 17/32 Inch, Make- Addison |
| 26 | H.S.S Drill Tapered shank, Size- 21/32 Inch, Make- Addison |
| 27 | H.S.S Drill Tapered shank, Size- 8mm, Make- Addison |
| 28 | H.S.S Bolt Tap B.S.W, Size- 5/8 Inch, Make- Addison |
| 29 | H.S.S Bolt Tap B.S.W, Size- 3/4 Inch, Make- Addison |
| 30 | H.S.S Bolt Tap B.S.W, Size- 1/2 Inch, Make- Addison |
| 31 | H.S.S Bolt Tap B.S.W, Size- 3/8 Inch, Make- Addison |
| 32 | H.S.S Die Nut, Size- 3/4 Inch, Make- Addison |
| 33 | H.S.S Die Nut, Size- 1/2 Inch, Make- Addison |
| 34 | H.S.S Die Nut, Size- 3/8 Inch, Make- Addison |
| 35 | H.S.S Die Nut, Size- 5/8 Inch, Make- Addison |
| 36 | Grinding Wheel, Rough, Size- (OD-250mm, ID-31.75mm, Width-25mm), Make- Carborandom |
| 37 | Carbid Grinding Wheel, Size- (OD-250mm, ID-31.75mm, Width-25mm), Make- Carborandom |
| 38 | C Clamp, Size- 6 Inch |
| 39 | Knurling Tool |
| 40 | H.S.S End Mill Cutter, Size- 10mm |
| 41 | H.S.S End Mill Cutter, Size- 12mm |
| 42 | Carbide insert turning holder left and right side V Shape, Size- 10 Inch |
| 43 | Carbide Insert Tool Holder ( Insert Size-1/4 Inch) |
| 44 | Carbide Insert Tool, V-Shape, v nmg 160404 Size-1/2 Inch |
| 45 | Carbide Insert Boring Tool, Holder Size- 10 Inch |
| 46 | M.S Square Rod, Size- 1” x 1” x 6 Mtr |
| 47 | M.S Square Rod, Size- 40mm x 40mm x 6 Mtr |
| 48 | M.S Square Rod, Size- 20mm x 20mm x 6 Mtr |
| 49 | M.S Square Rod, Size- 18mm x 18mm x 6 Mtr |
| 50 | M.S Square Rod, Size- 14mm x 14mm x 6 Mtr |
| 51 | M.S Square Rod, Size- ½” x ½” x 6 Mtr |
| 52 | M.S Square Rod, Size- 8mm x 8mm x 6 Mtr |
| 53 | EN-8 Rod, Size-32mm, Length-6 Mtr (M.T.C Required) |
| 54 | EN-8 Rod, Size-38mm, Length-6 Mtr (M.T.C Required) |
| 55 | EN-8 Rod, Size-45mm, Length-6 Mtr (M.T.C Required) |
| 56 | EN-8 Rod, Size-50mm, Length-6 Mtr (M.T.C Required) |
| 57 | EN-8 Rod, Size-60mm, Length-6 Mtr (M.T.C Required) |
| 58 | EN-8 Rod, Size-65mm, Length-6 Mtr (M.T.C Required) |
| 59 | EN-8 Rod, Size-70mm, Length-6 Mtr (M.T.C Required) |
| 60 | EN-8 Rod, Size-80mm, Length-6 Mtr (M.T.C Required) |
| 61 | EN-8 Rod, Size-100mm, Length-6 Mtr (M.T.C Required) |
| 62 | EN-8 Rod, Size-120mm, Length-6 Mtr (M.T.C Required) |
| 63 | Brass Rod, OD- 2 Inch, Length- 3 Mtr (MTC Required) |
| 64 | Brass Rod, OD- 2.1/2 Inch, Length- 3 Mtr (MTC Required) |
| 65 | H.T Bolt Full Thread with Nut, Size- 5/8” x 10”, Make- Unbrako |
