|
| 1 | Dismantling of wall and ceiling/cup board board fibre pulp AC boards etc any thickness including cover fillets removing the wiring and refixing the same including fixture as necessary at site including frame work. |
| 2 | M and L Providing & Fixing False ceiling with semi perforated 12mm thcik micro tegular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and pattern having moisture content less than 2%,humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 475 (part-4)-1970 and light Code Description unit rate No 429 SUB HEAD :26.0 NEW TECHNOLOGIES ANDMATERIAL reflectance of 85% minimum to be laid in true horizoatal level suspended on interlocking metel T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams oer sqm including both sides) comprising of main-T runners of size 15x32mmof length 3000mm, vross-T of size 15x32nn of lenght 1200mm amd secondry itermediate cross-T of size 15x32 of lenght 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) ie. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size24x24x0.40 mm of length 3000mm to be fixed on perimeter wall/partition with the help of plastic rawl pluhs at 450mm center to center and 40mm long dry wall screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-charge. |
| 3 | S & F in repair19/20mm thick exterior grade Prelaminated particle board as in cup board shutter,incl 6mm thk teak wood leaping and necessary rebating for double shutter where reqd incl polishing to leaping complete all as specified. |
| 4 | S & F in repairfor 25mm thickBlock board grade 2 quality interriorgrade commercial type fixed with screws to timber frame work includingteak wood leaping and necessary rebating for double shutter where required. |
| 5 | S & F in repaircontinuous (Piano) hinges, mild steel bright finish or electro glavanised (width of flap when open 30mm). |
| 6 | M&Lsecond class hard wood timber scantling plain fillets, square, rectangular or triangular in section clear swan, sectional area exc 13 sqcm & not exc 25 sqcm, secured with nails or brads. |
| 7 | S & F in repairfor PVC magnetic door catches of kitchen cabinet and similar work fixed with MS screws. |
| 8 | S & F in repairfor steel drapery Rod 18mm diawith brackets in cupboard complete all as approved by Engineer-in-charge. |
| 9 | Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame). |
| 10 | Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame). |
| 11 | Taking down shutters of any discriptionnot exceeding 1 sqm each all as specified and as directed. |
| 12 | Taking down shutters of any discription exceeding 2 sqm each all as specified and as directed. |
| 13 | Dismantling timber scantlings 40 Sqcm and over in section, in any position unframed work complete,all as specified anddirected . |
| 14 | Dismantling wrought iron or mild steel work of any dscription not otherwise provided for completeall as specified anddirected. |
| 15 | S & F in repairSteel window (Factory made) double rebate, with side hung, shutter inclhinges, tower bolt, steel handle and peg stay complete with glaze and gauge shutters (both are complete) devotailed or welded includingmaking good to cutting holes with PCC 1:2:4 and complete finishing to cill and jamb corners with plaster and match all as specified. |
| 16 | S & F in repairmild steel framed work such as grillsn gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders freamed balusters, walk ways, railings, framework of watertanks and similar work including aldrop and hinges holdfast etc conforming to Fe 290. Gde-E-165. |
| 17 | S & F in repairPressed steelframes box type made of 1.25 mm thick MS Sheet double rebates of size 125x60mmfor doors, ventilatorwith double rebates including necessary fixing lugs, hinges, lock strike plate etc, incl PCC 1:3:6 type C0 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge. |
| 18 | S & F in repairPressed steelframes box type made of 1.25 mm thick MS Sheet single rebates of size 105x60mmfor doors, ventilatorincluding necessary fixing lugs, hinges, lock strike plate etc, inclPCC 1:3:6 type C0 (using 12.5mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge. |
| 19 | M&L for Plain, solid, straight chowkats and frames made of 2nd class hard wood (sal), wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed,making good , and including dismantling complete all as specified and as directed by Engineer-in-Charge. |
| 20 | M&L Mild steel frame work as in door chowkhats with angle ironwelded together ends of angle shouldered and fixed to opening and welding 3 Nos mild steel butt hinges 100 mm size,and 6 nos hold fasts made out of FI 25x3 mm 30 cm long for fixing of chowkhats( Butt hinges paid sep) all as spd. |
| 21 | S & F in repair35 mm thick 2nd class hard wood glazed and skelton shutter devided into square with plain, chamferred or rounded sash bar and fitted with cut and mitred beads for securing glass, size of members as per SSS Part - I section 8 clause 8.24 (b). |
| 22 | All as per serial item No 21 here-in-before but 30 mm thickas inwindow and ventilatoretcare provided with stiles and rails, sash bar all as specified in SSR Part I, section 8, clause 8.24 (b), chemically treated,complete all as specified and directed by Engineer-in-Charge. |
| 23 | M & L for 30 mm thick 2nd class hardwood plain, framed, panelled shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. the size of rail and stile as per IS:1003 (Part-I) kiln seasoned and chemically pressure treated. |
| 24 | S&Ffor 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides and fitted to chowkhats complete all as specified anddirected. |
| 25 | Supply and fix steel ventilator with top hung shutter including hinges, steel peg stay, complete half fixed glazed and half top hung gaused complete all as specified and directed (Glassshall be measured and paid separately). |
| 26 | M&L aluminium alloy powder coated windows including aluminium coated frames, silding track frame bottom weighing not less than 1.015 kg/Rm ,sides and top not less than 0.826 kg/Rm double revated and 0.55 kg/Rm for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter silding type with aluminium sectins as per series-A (15mm) 3 track of jindal section number for silding windows with framed shutter including aluminium allow powder coated snap type beads handles with locking arrngement spring action and glazingclips joint cleats rubber gaskets etc inclding provision of 5.5 mm thick tinted frosted glass of superior quality and stainless steel jail including all standard fittings complete all as specified and directed. |
| 27 | M&L aluminium alloy powder coated door including frame and channel of section (Door frame single grove 101.6mm x44.45 mm x2.1,shutter top section 47.62mm x44.45x1.95mm thick shutter bottem vertical section85 mm x44.45 mm x1.80mm yhick ,shutter middle section 83.50mm x 44.45 mm x1.80mm thick shutter glazing clips weighing not less than 0.097 kg/Rm as directed and approved by GE and as per IS specification including provn of 5.5mm thick tinted glass/12mm thick thick prelaminated particle board as required includingsling bolt 300mm, alu hinges 150 mm, alu handle 150 mm ,tower bolt 150 mm , \"SAMRAT\" ,looking arrangement \"GODREJ\" rubber gasket and door stopper complete all as specified and directed. |
| 28 | S&F aluminium ventilator partly glazed/ gauzed including including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.provision for fixing the exhaust fancomplete all as specified and as directed. |
| 29 | Servicing and greasing of aluminium door including replacement nut , screws rubber gaskets, pivot, taper clip etc including taking down carefully of door shutter for replacing unserviceable parts/components by new parts /components for smooth functioning of door and refixing the same in existing opening/position, complete,all as specified and directed. |
| 30 | Material and labour for aluminium alloy Powder coated standard 10mmsection and opening of size window grill as per approved sample and as per IS specifications complete all as specified and as directed. |
| 31 | Factory made signle extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows and other frames/ chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/ cum, screw withdrawl strength of 2200N (Face) and 1100 N (edge), minimum compressive strengthy of 58N/ mm2, modules of elasticity 900 N/ mm2 and resistance to spread of flame of being termite / borer proof, water/ moisture proof and fire retardant and fixed with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS hold fast/ lugs or SS dash fasteners shall be paid for separtely).Note: (i) For WPC solid door/ Window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but not extra payment on this account shall be made.(ii) Material test certificate and authentication should be provided by the manufacturing company. |
| 32 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdral strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistace to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction Engr-in-Charge. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separtely) |
| 33 | S&F in repair Floor door stopper of aluminium alloy body and tongue, overall length of cover plate 150 mm , anodized, with hard drawn steel spring, fixed to shutters,complete all as specified and as directed. |
| 34 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed includind taking downand refixing of shutter as in repairs complete all as specified anddirected. |
| 35 | S&F in repair aluminium bodyhydraulically Door closer regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed as in repairscomplete all as specified anddirected. |
| 36 | S&F in repair stainless steel butt hinges medium weight 100 mm size fixed with MS screws. |
| 37 | S&F in repair Mild Steel Butt hinges, heavy weight, cold rolled, of size 75 mm complete all as specified anddirected. |
| 38 | S&F in repair aluminium anodised barrel tower bolt extruded section 150 mm long and fixed with MS screws. |
| 39 | S&F in repair 150 mm extruded aluminium alloy handle anodised fabricated type and fixed with mS screws. |
| 40 | S&F in repair 300 mm extruded section aluminium alloy anodised, sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut. |
| 41 | S&F in repairMild steel 200 mm ordinary rat tail rod pattern springs including roller and roller plate complete fixed to wooden or steel frame all as specified and as directed. |
| 42 | M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 43 | M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 44 | M&L preparation of Old or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 45 | All as per Item No 44 but two coats of synthetic enamel paint on steel surface. |
| 46 | M & L for preparation of Old or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 47 | S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed. |
| 48 | Hacking out old broken glass (any thickness, size, quality or description) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed by Engineer-in-Charge. |
| 49 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed by Engineer-in-Charge. |
| 50 | Supply and fix in repair 4mm thick ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary, complete all as specified. |
| 51 | Supply and fix in repair heat absorbing fibre glass pin head type 4mm thick ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary complete all as specified. |
| 52 | Supply and fix in repair heat absorbing fibre glass 5mm thick ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary, complete all as specified. |
| 53 | S&F in repair for Toilet paper holder of vitreous china fixed to walls with chromium plated(CP) brass screws all asspecified and as directed. |
| 54 | S & Fin repairkitchen plate rack with four shelves made out of stainless steel sheet 1mm thick over all size 75cm X75cm X 20cmscomplete all as specified & directed. |
| 55 | S&F in repairs tubular towel rail, brass chromium plated, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified & directed. Make: Cera Cat No. F5001103 or Equivalent make of Kohler/Jaquar/Blue Star & Silver Shine/ Prayag |
| 56 | S & F in repairfor sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and waist including bedding in cement mortar to dwarfwall or including fixing cantilever, brackets and connecting union to pipe overall size 915x460mm, bowl size 410x330x160mm complete all as specifed as direted. |
| 57 | S & F in repairfor Glass Corner Shelf 6mm thick including CP railing radius 250mm complerte all as specified and directed by Engineer-in-Charge. |
| 58 | S & F in repairfor Glass shelf assembly 5.5mm thick, 600mm long 120mm wide with cp railingcomplerte all as specified and directed by Engineer-in-Charge. |
| 59 | S & F in repairfor looking mirror of size 600mmx450mmx5.5mm thick with aluminium frame selected quality mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 60 | Demolition of brick work built in cement orcement lime mortar of any description including quoins,arches,pillars,etc. all as directed. |
| 61 | M & L for brick work with Cement Mortar1:6 using sub class \"B\" bricks,old size , straight or curved on plan exceeding 6 m mean radius all as specified and directed. |
| 62 | Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etcup to 10m height complete all as specified and directed. |
| 63 | M&L for 15mm thick ready mix cement plaster with bulk density 1.4 to 1.70KG per ltr water ration 17 to 19% by weight with compressive str as per IS 4031 part-VI applied as per the manufactore instr incl necesaery cement screed and prepartion of surface to received ready mix plaster up to 10m height. complete all as specified and directed by engineer-in-charge complete all as specified and directed complete. |
| 64 | M&L for 10mm thick ready mix cement plaster with bulk density 1.4 to 1.70KG per ltr water ration 17 to 19% by weight with compressive str as per IS 4031 part-VI applied as per the manufactore instr incl necesaery cement screed and prepartion of surface to received ready mix plaster up to 10m height. complete all as specified and directed by engineer-in-charge complete all as specified and directed. |
| 65 | M&L for 5mm thick ready mix cement plaster with bulk density 1.4 to 1.70KG per ltr water ration 17 to 19% by weight with compressive str as per IS 4031 part-VI applied as per the manufactore instr incl necesaery cement screed and prepartion of surface to received ready mix plaster up to 10m height. complete all as specified and directed by engineer-in-charge complete all as specified and directed. |
| 66 | M&L for chipping out spilled and loose concrete cover and derusting steel reinforement of concrete column, beam, slab, chajjas, parapets and the like as directed upto 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforecement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guiniting mix using one part of OPC 53 grade and two part of gaggar sand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guiniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out upto 10 metre height) complete as directed at site Note :- (a) After placing the additional reinforecement all concrete surfaces shall be throughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition,guiniting is done with polycrete admixture @ 2% by weight of cement all as per manufacturers instructions (polycrete admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer).(c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account. |
| 67 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paintover a coat of putty complete all as specifed as direted by Engr-in-charge. |
| 68 | M & L for applyingtwo coats of oil bond destemberover one coat of birla white wall care putty on newly plastered surfaces(internal) of walls complete all as specified and directed. |
| 69 | M&L preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 70 | M&L for old decorated surfaces plastered or unplastered surface of wall and applying two coat of oil bond distemper on wall complete all a spcefied. |
| 71 | M&L for preparation of old decorated plastered surfaces of walls, brooming down,washing with water etc and applying two coat of cement based paint up to 10 m height complete all as specified and directed. |
| 72 | M & L for preparation of Old surface (Plastered or un plastered) on ceiling by completely scraping/ removing the existing treatment and applying two coatsof white wash over a coat of primer complete. |
| 73 | Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed. |
| 74 | M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white oroloured cement to match incl 15mm thick screed bed or bedding layers in cement mortar ( 1:6) complete all as specified and as directed. |
| 75 | S&F Non - skid Ceramic colour tiles 600 x600 x 7 to 8 mm thickin floors etc and 15mm thick screed bed 1:6 in cement mortar. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified. |
| 76 | S&F Non - skid Ceramic colour tiles 600 x100 x 7 to 8 mm thickin vertical surfaces etc and 10mm thick screed bed 1:4 in cement mortar. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified. |
| 77 | M&L for glazed ceremic colour tiles (600x300x7mm) thick, in vertical surface etc set and jointed in neat slurry and pointed in white or coloured cement to match with tiles including 10mm thick rendering in cement mortar (1:6) complete all as specified and as directed. |
| 78 | M&L for 18-20 mm Granite (any type) work (table rubbed and polished) in steps,jambs,pillars window-cill,cooking platforms and incl 15mm thick screed bed using marble dust with admixturein CM (1:4) with pointing and white cement (1:2)of pigment to match with shade of granite all as spd. |
| 79 | M&L for machine cut polished Machine cut kota stone 20-25mm thick as in floor, steps, pillar fixed with neat cement slurry over backing coat of 20mm thick in CM (1:4) including rubbing and polishing complete all as specified. |
| 80 | Dismentling asbestos cement corrugated orsemi corrugated sheets in roof fixed with L hook or cranked bolt. |
| 81 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 82 | S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 83 | S&F in repair mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts and similar small articles conforming toGrade E-165 (Fe 290) including and fixed in position complete all as specified and as directed by Engineer-in-charge. |
| 84 | S&F in repair 1mm thick plain galvanised mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length & girth as fixed) with grade of zinc coating 275, fixed with self tapping screws complete all as specified & as directed. |
| 85 | S & F in repair rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 86 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 87 | Demolation Bricks (laid flat or on edge) or brick tiles in floors, roof, channels, kerbs, aprons, etc. (each layer all as specified and directed. |
| 88 | Demolition Mud in roofs, any thickness, including plastering and leeping (whether full thicknessemoved or only a part thereof) all as specified and directed. |
| 89 | Removing soil excavated material exc. 5Km and depositing where directed at a level n exc. 1.5 m above the starting pointall as specifed and directed. |
| 90 | M&L for roof treatment as per the description below including dismantling/taking down existing roof treatment complete:-a) preparation of roof surfaces by removing all loose material /dust extra for carrying out water proofing treatment.b) Apply bituminous primer @ 0.3 ltr/Sqm (conforming to IS-3384) on prepared surfaces.After drying of primer apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm of prepared surfaces.c) Laying APP (Atatic Polypropylene) modifiedfive layered membrane 3 mm thick and weighing not less than 4 Kg/Sqm with centre core 160 GSM/ Sqm ; core reinforced and laid with 75 mm side overlap and 150 mm end lap. The membrane shall be laid with LPG torch application and overlaps sealed and finished neatly as per the manufacturer specification apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm and apply two coat of silver shield bitumestic aluminum paint all as specified. |
| 91 | M & L for PCC type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in roof complete all as specified and directed. |
| 92 | Demolition of reinforced cement concrete in any position all as specified and as directed by Engineer -in-Charge. |
| 93 | M&L for Reinforced cement concrete1:1.5:3 Type A-1 (20 mm graded agg) in roof slab, cooking plateform, shelves , chajja & similar items complete all as specified and as directed by Engineer-in-Charge. |
| 94 | Use and waste of form work to soffits of suspended slabs such as roof slab, Chajja, platforms and landings etc not exc 200mm thick (horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed. |
| 95 | S&F TMTsteel bars of 10 mm dia and over,cut to length bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to. complete all as specified and as directed. |
| 96 | S & F in repairfor Aluminium drapery curtain Rod 25mm dia Powder Coated including wooden side caps, brackets, and rings @ 120mm c/c/ complete all as approved by Engineer-in-charge. |
| 97 | Supply and fix in repair welded steel wire fabric(MS Jali) fixed to steel members weight n. exc. 4 kg/sqm incl welding complete all as specified and directed. |
| 98 | S & F in repair Helical Door Spring MSof standard size with rail. |
| 99 | S&F in repair 100mm long brass 4 lever mortice lock, vertical type complete all as specified. |
| 100 | Supply only MS butt hinges 100mm |
| 101 | Schedule of Credit |
