|
| 1 | Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 2 | M&L for brick work with sub class \"B\" bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed. |
| 3 | M&L for brick work with sub class \"B\" bricks, straight or curved on plan exc 6 m mean radius in half brick thick wall built in CM 1:4 complete all as specified and as directed. |
| 4 | Taking down cement plaster any description from walls/ceiling including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 5 | M&L for rendering 15mm thick plaster in CM (1:4) on brickor concrete surfacesfinished even & smooth complete all as specified and as directed. |
| 6 | M&L forrendering 15mm thick plaster in CM (1:6) on brickor concrete surfacesfinished even & smooth, complete all as specified and as directed. |
| 7 | M&L forrendering 10mm thick plaster in CM (1:4) on brickor concrete surfaceson ceiling. finished even & smooth, complete all as specified and as directed. |
| 8 | M&L for preparation of old decorated surfaces of wall and applying two coat of oil bound distemper including making good the surface by filling with wall care putty making surface even and smooth, complete all as specified and as directed. |
| 9 | M&L for three coats of white wash on newly plastered surface of wall including preparation of surface, complete all as specified and as directed. |
| 10 | M&L for three coats of white wash on newly plastered surface on ceiling, complete all as specified and as directed. |
| 11 | M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint complete all as specified and as directed. |
| 12 | Demolition of reinforced cement concrete of any description and in any position no otherwise specifically provided for as in cover slabs (for man holes, septic tank, soak well etc) complete all specified and as directed. |
| 13 | M&L for slabs supported on walls, beams and columns in floors, roofs, kitchen slabs, balconies, canopies made in RCC 1:2:4 type B1 using 20mm graded aggregate complete all as specified and as directed. |
| 14 | MS bars (TMT) 10mm dia and over cut to length bent to shape required including cranking binding spirally for hooking for cols and binding with and inc mild steel wire (Annealed) not less than 0.9mm dia as in reinforcement complete all as specified and as directed. |
| 15 | Formwork to sides and soffits of floor or roof beams, beam hunching, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed. |
| 16 | Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofsexc 5 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n exc 10 cm wide complete all as specified and as directed. |
| 17 | Dismantling of stone slab of any description including cement mortar bedding but not backing, complete all as specified and as directed. |
| 18 | M&L for 18 to 20 mm thick granite of any type/colour as approved, work (table rubbed mirror polished) edges rounded chamfered and bull nosed laid and fixed in any position (Vertical/Horizontal/Inclined) over and including cement screed over Cement mortar bedding in CM(1:4) 10 thick and pointed in white or colour cement with admixer of pigment to match with shade of granite stone including grinding and polishing complete all as specified and as directed. |
| 19 | Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level) complete all as specified and as directed. |
| 20 | M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) on floor as sub base or roof surface to bring uniform surfaces complete all as specified and directed. |
| 21 | M&L for non skid ceramic colouredtiles 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc and jointed in neat cement slurry andpointed in white cement or coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed. |
| 22 | M&L for non skid ceramic colouredtiles 8mmthick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, on dado / skirtingetc and jointed in neat cement slurry andpointed in white cement or coloured cement to match the shade of tile over and including 10mm thick screed bed or bedding layer in CM (1:4) complete all as specified and as directed. |
| 23 | M&L for rustic tiles 7 to 8mm thick (square/rectangular) polished area of tiles exc 0.11 sqm but n exc 0.18 sqm each in floors etc set and jointed with grey cement slurry and printed in white or coloured cement to match the shade of colours including 15mm thick screed bed or bedding layer in CM (1:4) complete all as specified and as directed. |
| 24 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as directed. |
| 25 | S&F glazed ceramic coloured tiles in vertical surfaces 350x250x7mm/450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including cutting to required shape and size over and including 10mm thick plaster in CM (1:4) on vertical surfaces as backing coat complete all as specified and as directed. |
| 26 | M&L for 75 mm thickPCC 1:2:4 type B2 (using 40mm graded aggregate) as in path/hard standing, finished with smooth even surface complete all as specified and as directed. |
| 27 | M&L for 75 mm thick PCC 1:3:6 type C-1 (20mm graded aggregate) plinth protection and similar work surface even and fair without using extra cement complete all as specified and as directed. |
| 28 | Resecuring or easing & adjusting, including taking down shutter and refixing in the same opening any descriptionexc 1.00 Sqm and n.exc 2.0 Sqm each complete all as specified and as directed. |
| 29 | Resecuring or easing & adjusting, without taking down shutter any description exc 1.00 Sqm and n.exc 2.0 Sqm each complete all as specified and as directed. |
| 30 | Taking down chowkats or frames with shutters w/o taking off shutters from the frames n.exc 1.5 Sqm each, complete all as specified and as directed. |
| 31 | Taking down chowkats or frames with shutters w/o taking off shutters from the frames exc 1.5 Sqm and n.exc 4.0 sqm each , complete all as specified and as directed. |
| 32 | Taking down shutter of any description area n.exc 1.00 Sqm each complete all as specified and as directed. |
| 33 | Taking down shutter of any description area exc 1.00 Sqm and not exc 2.00 sqm each, complete all as specified and as directed. |
| 34 | S&F second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed. |
| 35 | Treating the back of Chowkats Surfaces of any description wood, steel, iron, concrete, brick, stone, etc., exceeding 10cm in width or girth with Black bituminous paint complete all as specified and as directed. |
| 36 | S&F 35mm thick Glazed skeleton door shutters, open rebated and prepared to receive glass, Gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc, size of members of shutters as specified in SSR Part-I Section 8, clause.8.24 (a), using IInd Class Hard wood complete all as specified and as directed. |
| 37 | S&F 30mm thick Glazed skeleton shutters for window, ventilator etc are provided with stiles and rails, open rebated and prepared to receive glass, Gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc, size of members of shutters as specified in SSR Part-I Section 8, clause.8.24 (a)., using IInd Class Hard wood complete all as specified and as directed. |
| 38 | S&F 30mm thickGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc(with sash bars),divided in to squares, with plain, chamfered or rounded, and rebated sash bars, any numbers for securing glass etc for windows, ventilators are provided with stiles and rails as specified in SSR part I section 8 clause 8.24 (b) using IInd Class Hard wood complete all as specified and as directed. |
| 39 | S&F 30mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 40 | S&F for 35mm thick, IInd class hard wood,plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 41 | Refixing of shutter in same opening any description area exc 1.00 Sqm and n.exc 2.0 Sqm each complete all as specified and as directed. |
| 42 | S&F galvanized mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples all as specified and as directed. |
| 43 | S&F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples all as specified and as directed. |
| 44 | S&F 3mm thick plain glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 45 | S&F in repair 3mm thick plain glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane including hacking out all as specified and directed. |
| 46 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed. |
| 47 | S&F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at siteall as specified and directed. |
| 48 | M&L for preparation of new or previously untreated wooden surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 49 | S&F framed work such as grills, gratings etc. with ends of bars shouldered and or rebated or forged into spikes, framed guard bars etc confirming to Fe-290-Gde-E-165 complete all as specified and as directed. |
| 50 | M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 51 | S&F 150 mm long anodised aluminium handles, cast type complete all as specified and as directed. |
| 52 | S&F in repairs for 150 mm long anodised aluminium handles, cast type complete all as specified and as directed. |
| 53 | S&F for 150 mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed. |
| 54 | S&F in repairs for 150 mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and as directed. |
| 55 | S&F 300mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed. |
| 56 | S&F in repair 300mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed. |
| 57 | S&F 100mm long anodised aluminium handles, cast type, complete all as specified and as directed. |
| 58 | S&F in repairs 100mm long anodised aluminium handles, cast type, complete all as specified and as directed. |
| 59 | S&F for 100mm long anodised aluminium barrel tower bolt of extruded section, complete all as specified and as directed. |
| 60 | S&F in repairs for 100mm long anodised aluminium barrel tower bolt of extruded section, complete all as specified and as directed. |
| 61 | S&F butt hinges, 100 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and as directed. |
| 62 | S&F in repairs for butt hinges, 100 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified and as directed. |
| 63 | S&F butt hinges, 75 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 complete all as specified and as directed. |
| 64 | S&F in repairs butt hinges, 75 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21 complete all as specified and as directed. |
| 65 | S&F 300mm MS ordinary rat tail spring (Helical door spring)including roller and roller plate complete all as specified and as directed. |
| 66 | S&F in repairs 300mm MS ordinary rat tail spring (Helical door spring) including roller and roller plate complete all as specified and as directed. |
| 67 | S&F in repair 18/19 mm thick pre-laminated particle board interior grade one side with decorative choice laminations and other side balancing white lamination fixed incup board shutter, shelves, partitions and similar items including dismantling complete all as specified and as directed. |
| 68 | S&F in repair\"s 18 mm thickceluka PVC ply of grade 1 quality of both side prelam fixed with screws, solvent cement /adhesive to make cupboard shutter side to and bottom, shelves inside the cabinet and shutters or drawers, complete all as specified and as directed. |
| 69 | S&F in repair\"s factory made PVC shelf /Partition of required size consisting of panels of 18mm (+/- 0.7) thick Celuka PVC ply and for supporting the hold of Shelf/Partitions and shall provided 3 edges of 18mm x 18mm as per required length. The front side of the edge visible in the front the shelf /partition to be edge lipping by 18 mm wide x 1mm thick PVC sheet of density 600 Kg/ Cum Manufactured by an ISO-9001-2015 certified company, using solvent cement etc, complete all as specified and as directed. |
| 70 | S&F continuous (Piano) hinges, mild steel bright finished or electro galvanised with flap size 30mm complete all as specified and as directed. |
| 71 | S&F Hasp and staple for 75 mm of aluminium anodised complete all as specified and as directed. |
| 72 | S&F in repairs Hasp and staple for 75 mm of aluminium anodised complete all as specified and as directed. |
| 73 | S&F in repair 600 x 450 mm and 5.5 mm thick glass bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial ply wood and fixed wooden plugs with CP brass screws and cup washers complete all as specified and directed. |
| 74 | S&F 15 mm bore GI water tube medium grade with all fittings and fixed to wall, floor and ceiling etc, complete including taking down all as specified and as directed. |
| 75 | S&F 20 mm bore GI water tube medium grade with all fittings and fixed to wall, floor and ceiling etc, complete including taking down all as specified and as directed. |
| 76 | Cutting chases pinning in, making good to facing where required & pointing in CM 1:3 for concealed water tubing not exc 10CM girth in brick wall, complete all as specified and as directed. |
| 77 | S&F in repair vitreous china wash hand basin, (white), flat back of size 550x400 mm with and including two CI brackets, brass chromium plated including waste coupling fittings and PVC waste pipe complete all as specified and as directed. |
| 78 | S&F in repairs stainless steel plate rack of size 900x 750 x 250 mm made of 1mm thick stainless steel complete all as specified and as directed. |
| 79 | S&F in repairs ISI marked 15mm bore, chromium plated bib tap long body fancy type of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 80 | S&F in repairs 15 mm dia bore cast copper alloy chromium plated angle cock/stop cock with long shank and cup (concealed type) screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed, complete all as specified and as directed. |
| 81 | S&F in repairs 15 mm dia bore fancy type pillar taps, cast copper alloy chromium platedscrewed down high pressure with or without lettered \"Hot\" or \"Cold\" with capstan head, screwedfor iron pipes or for union and fixed, complete all as specified and as directed. |
| 82 | S&F in repair 32 mm CP Waste coupling for Sink/WHB complete all as specified and as directed. |
| 83 | S&F in repair 32 mm Waste pipe for sink and WHB complete all as specified and as directed. |
| 84 | S&F in repair brass chromium plated over head shower rose with arm 125 mm size with long body with swivel joint including fixing to steel pipe or union, complete all as specified and as directed. |
| 85 | S&F in repair Vitreous China squatting pan, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern) complete all as specified and as directed. |
| 86 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) coloured (including two Nosfixing bolts including PVC seat cover but excludingflushing cistern and flush pipe) complete includingmaking good to floor with and including fixing of P or S trap, complete all as specified and as directed. |
| 87 | S&F in repairs vitreous china wash down water closet pan (Cascade pattern) coloured, fancy type (including two Nos fixing bolts including PVC seat cover but including flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed. |
| 88 | S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets., flush pipe of polyethylene of low or high density or PVC 32mm dia for low level flushing cistern, PVC connection 450 mm longcomplete all as directed. |
| 89 | Taking down and refixing WHB / Sink / Plate Rack / Flushing Cistern etc any size and making good to surface complete all as specified and directed. |
| 90 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 91 | S&F in repair soap dish, brass, chromium plated fixed to wall with brass chromium plated screw, complete all as specified and as directed. |
| 92 | S&F in repair CP towel rail 20 mm dia D type, 60 cm long fixed with CP screws and rowel plug in wall, complete all as specified and as directed. |
| 93 | S&F in repair sheet glass shelf consisting of 5.5mm thick sheet glass self assembly 12cm width with chromium plated guard and railing 60cm long, complete all as specified and as directed. |
| 94 | S&F in repair for 3 tier acrylic corner shelf fixed in position complete all as specified and as directed. |
| 95 | S&F in repair 20mm dia curtain rails, stainless steel, chromium plated with fixing bracket stops, rollers etc, complete all as specified and as directed. |
| 96 | S&F in repair 100 mm dia CP grating including joints with solvent cement complete all as specified and directed. |
| 97 | S&F in repair 150 mm dia CP grating including joints with solvent cement complete all as specified and directed. |
| 98 | S&F in repairs rotational moulded polyethylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 99 | S&F in repairs rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. |
| 100 | S&F in repairs 20 mm PVC float valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe, complete all as specified and as directed. |
| 101 | S&F in repairs PVC water tank cover of any capacity(500/1000 Ltr) fixed with binding wire tightly all as specified and directed |
| 102 | Repairs to Bath room/Toilet/Kitchen Floor traps by replacing the damaged Floor traps and connected waste pipes with new floor traps and waste pipes. The joints of traps and waste pipes shall be done properly/leak proof and re-fixing the same floor/wall etcand the surfaces finished even to match with the existing surface including demolition of concrete if required and making good to surface using PCC 1:2:4 type B1 (using 20mm graded stone aggregate) or CM 1:4 and tiling as required complete all as specified and as directed. Note:- Quantity of floor/wall tiles shall be measured and paid separately under the relevant items. |
| 103 | S&F in repair PVC (SWR) pipe 110 mm dia, conforming to IS-13592-1992 type \"B\", single socketed in any length with rubber ring joint fixed to walls with clamp including taking down complete all as specified and as directed. |
| 104 | S&F in repair PVC (SWR) pipe 75 mm dia, conforming to IS-13592-1992 type \"B\", single socketed in any length with rubber ring joint fixed to walls with clamp including taking down complete all as specified and as directed. |
| 105 | S&F in repair PVC (SWR) bend any radius, 110 mm dia complete all as specified and as directed. |
| 106 | S&F in repair PVC (SWR) junction single \"T\" equal with access door 110 mm dia complete all as specified and as directed. |
| 107 | S&F in repairs low density polyethylene (LDPE) pipe of pressure rating 6 Kg/Sqcm, 50mm bore, complete all as specified and as directed. |
| 108 | M&L for laying 3 mm thick APP membrane weight not less than 3.5 Kg / Sqm non woven polyester reinforced with mineral finish on top to be laid on roof any type including preparation of surface to avoid leaking in roof complete all as specified and as directed. |
| 109 | M&L for 40 mm thick padding in roof, chhajja and similar work in PCC 1:2:4 type B0 (using 12.5 mm graded aggregate) with WPC @ 3% by weight, making hunching if required and surface even and smooth with using extra cement including demolition complete all as specified and as directed. |
| 110 | M&L forcolouredglossy finish Chequered cement concrete tiles 20cm x 20cm x 25mm thick, With white cement & pigment set, jointed and pointed in neat cement slurry and painted in white or coloured cement in floors including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 111 | M&L for coloured, glossy finish precast 60mm thick cement concrete interlocking pavers/ tiles Grade M-35 made with grey cement andpigment manufactured by automatic hydraulic compression with high compressive strength, any size, pattern and shape as approved by engineer-in-charge, laid dry oversand cushion in patterns with different colour paver block /tiles as in path, complete all as specified and as directed. |
| 112 | M&L for PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in coping including necessary form work etc complete all as specified and directed. |
| 113 | M&L for 100 mm thickPCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in Sub base for path/hard standing, complete all as specified and as directed. |
| 114 | M&L for Petty repair to 15mm bore dia of bib taps, pillar taps, stop cocks, concealed stop valves, wall mixture, basin mixture etc or of similar nature job of any description by replacing the nylon washer, brass spindle, nipple where necessary complete all as specified and as directed. |
| 115 | S&F in repair internal siphon assembly for cistern complete all as specified and as directed. |
| 116 | S&F in repairs PVC water closet seat cover white, closed pattern and mild steel chromium plated or aluminium hinging device complete all as specified and as directed. |
| 117 | S&F in repairs chromium plated health faucet8mm dia, 1 mtr long CP flexible tube with wall hook and zet suitable for 15 mm bore pipe or for union and fixed, complete all as specified and as directed. |
| 118 | S&F in repairs PVCEaves Gutters for Rain Water half rounded 250 mm dia including outlet to rain water pipe and stop end angle etc. and necessary fixing arrangement complete all as specified and as directed. |
| 119 | M&L for 6 mm thick asbestos cement, corrugated or semi corrugated sheet in roofs, wall fixed with L- type or \"J\" or cranked hook bolts etc including dismantling old AC sheet complete all as specified and as directed. |
| 120 | S&F asbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheets with \"L\" or \"J\" type or cranked hook bolt complete all as specified and as directed. |
| 121 | S&F 0.63mm thick class VII corrugated galvanised mild steel sheeting with two corrugation side lap fixed with\"L\" or \"J\" hooks in roof including dismantling old sheet complete all as specified and directed. |
| 122 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling old sheet complete all as specified and as directed. |
| 123 | S&F in repairs prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick ofcolour having tensile strength of 550 Mpa as inplain sheet as in ridges, gutters , facia bd etcl, fixed with self tapping screws or \"J\"/\"L\"hooks complete all as specified and as directed. |
| 124 | Dismantling timber scantling 40 Sqcm and over in section, in any position of framed work complete all as specified and as directed. |
| 125 | Dismantling timber scantling 40 Sqcm and over in section, in any position of unframed work complete all as specified and as directed. |
| 126 | Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. area under 40 sqcm in section complete all as specified and directed. |
| 127 | S&F rolled mild steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. using Fe 410-W(Gde E-250 Quality- A) complete all as specified and directed. |
| 128 | S&F rolled mild steel workin tubular trusses, rafters, purlins, posts, flat sections etc including necessary welding/fabrications using Fe 410-W (Gde E-250 Quality- A) complete all as specified and directed. |
| 129 | S&F 2nd class hard wood in scantlings clean sawn timber fixed as in door frame, frame work in ceiling and similar work complete all as specified and as directed. |
| 130 | M&L for preparing surfaces of wood and wood based material, new or old of any description and girth and treated with creosote oil complete all as specified and as directed. |
| 131 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and as directed. |
| 132 | S&F in repairs 4mm thick asbestos cement plain building board, fixed in ceiling flat or sloping to timber frame work with screws including dismantling complete all as specified and as directed. |
| 133 | S&F wooden cover fillets square or rectangular and sectional area exc 3 & n.exc 6 Sqcm of second class hard wood secured with nails complete all as specified and as directed. |
| 134 | S&F IInd class hard wood exc 13 & not exc 25 sqcm plain, fillets, square, rectangular or triangular in section, clean swan, secured with nails or brads complete all as specified and as directed. |
| 135 | S&F for suspended false ceiling using anodised GI exposed ceiling suspension system of grid size 60 cm x 60 cm width main runner \"T\" size 24 mm x 24 mm x 0.3 mm thickness and cores Tee of size 24 mm x 24 mm x 0.43 mm thick (using 60 cm x 60 cm E board classic 4 mm thick ceiling board) to be placed in grid of GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing position for light fixtures, air conditioning diffuser and ducks, sprinkler, smoke detector etc.The main runner to be secured to structural soffit by hanger @ 1220 mm maximum C/C.The last hanger at the end of each runner should not be placed at more than 450 mm from the adjacent wall.Flush fitting 1200 mm cross \"T\" to be inter locked between main runner @ 610 mm C/C so as to form 600 mm x 600 mm grid complete all as specified and as directed. |
| 136 | Preparation of new wooden surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint and applying two coat of synthetic enamel paint over a coat of redprimer complete all as specified and as directed. |
| 137 | Schedule of Credit |
