}

E-Rate Quotation Of Non Dsr Items For Preparation Of Estimate For The Work Proposed Erecting Grand Shri Ram Sculpture And Installing Music Fountain And Fasad Lights And Electrification At The Ram Shrushti Udyan, Tapovan, Panchvati Nashikin The Jurisdictio, nashik-Maharashtra

Public Works Department has published E-Rate Quotation Of Non Dsr Items For Preparation Of Estimate For The Work Proposed Erecting Grand Shri Ram Sculpture And Installing Music Fountain And Fasad Lights And Electrification At The Ram Shrushti Udyan, Tapovan, Panchvati Nashikin The Jurisdictio. Submission Date for this Tender is 24-08-2023. Statue Tenders in nashik Maharashtra. Bidders can get complete Tender details and download the document.




Tender Notice

39100070
Corrigendum : E-Rate Quotation Of Non Dsr Items For Preparation Of Estimate For The Work Proposed Erecting Grand Shri Ram Sculpture And Installing Music Fountain And Fasad Lights And Electrification At The Ram Shrushti Udyan, Tapovan, Panchvati Nashikin The Jurisdictio
Open Tender
Indian
Maharashtra
Nashik
24-08-2023

Tender Details

E-Rate Quotation Of Non Dsr Items For Preparation Of Estimate For The Work Proposed Erecting Grand Shri Ram Sculpture And Installing Music Fountain And Fasad Lights And Electrification At The Ram Shrushti Udyan, Tapovan, Panchvati Nashik In The Juris , Supply Of 108 Feet Flag Mast. The Mast Shall Befabricated From Special Steel Plates. Conforming To 355 Grade As Per Bs-En10-025, Cut And Folded To Form A Polygonal Section Welded. The Welding Is In Accordance With Bs 5135. At Site The Section Shall Be Joined Together By Slipstressed-Fit Method. No Side Welding Or Bolted Joint Shall Be Done On The Mast. The Minimum Overlap Distance Shall Be 1.5 Times The Diameter At Penetration. The Mast Shall Be Provided With Fully Penetrated Flange. Which Is Free From Any Lamination Or Incursion. For The Environmental Protection Of The Mast. The Entire Fabricated Mast Shall Be Hot Dip Galvanized, Internally And Externally As Per Bs En Iso 1461. Suitable For Wind Velocity As Per 15875. After Galvanization. Mast Should Be Pu Painted With Caching Primer And White Pu Paint. An Adequate Door Opening Shall Be Provided At The Base Of The Mast And The Opening Is Such That It Permits Clear Access To Equipment Like Winches, Cables, Plug And Socket, Etc. And Also Facilitates Casy Removal Of The Winch If Required Flagmast Includes System For Raising Lowering Of Flag It Shall Have Double Drum Winch.6 Mm Dia Stainless Steel Wire. Rope And Integral Power Tool For The Raising And Lowering Of Flag Suitable Control Panel Shall Be Provided Forreversing Operation Of Power Tool Motor. Also Arrangement For Fixing Led Aviation System And 3C 2.5 Sqmm Cu Armoured Cable The Door Opening Shall Be Complete With A Close Fitting. Vandal Resistant, Catherproof Door, Provided With Heavyduty Double Mtemal Lock With Special Paddle Key. Supply Of Foundation Bolts Manufactured From Special Steel Along With Nuts, Washers, Anchor Plates And Templates. Make-Bajaj. Valmont, Transrail. And With Annual Maintenance For 5 Year , Erection Of The Flag Mast With The Help Of Suitable And Required Equipments, And Assembling All Operating System Assembly Of All Sections With Help Required Manually, Machinery ( Crien, Jcb ) And Installing It On The Foundation. All Electrical Connections And Installation Of Flag To The Mast And Giving Successful Trial , Itc Of Low Intensity Aviation Obstruction Lamp Witha Type System. Ledwatch Z30 A Inbuilt Photo Switch. Design Conforming To Icao Annex 14. Aviation Lamp Included 300 Nos Superbright Leds In Red Color. Input Working Voltage 230V Ac ( + / -10 %L Light Intensity Of The Lamp> 10 Candela @ 360. Power Consumption Should Be < 09 Watts. Number Of Circuits Are Six In Series / Parallel. Average Burning , Life Of Lamp Should Be 100000 Hrs. Plv Protection Upto 1Ky. Ip Rating Should Be Lp65 As Per Is-13947 ( Part-1 ) 1993. Body Material Of The Lamp Should Be Pres Ure Cast Aluminum And Dome Should Be In Red Color With Transparent Polycarbonate With Endless Neoprene Gasket. All Over Finishing Of The Lamp Is Golden Yellow Powder Coated With 60 Micron Thick. Connecting Lids Of Lamp With Connector Upto 01 Mtr For 3C X 2.5 Sqmm Cu Armoured ( With Ups And Battery For Support ) , Supplying & Erecting Street Light Control Panel In Powder Coated Crca 14116 Swg Sheet, Outdoor Type. Single Phase. 240 Volts Consisted Of Suitable Rating Contactor, 24 Hrs Digital / Astronomical Time Switch. Spn Mcb 63 Amp. Auto / Manual Selector Switch. On / Off Push Buttons. Indicator Lamps, Control_Viring. Metering Device, Etc For Automatic Operation & Overcurrent, Short Circuit, Earth Fault Protection Of Street Lights Upto The Max Load Of 12 Kw On Provided Iron Frame / Cc Foundation , Supply And Installation Of The National Flag / Orange Flag Of India As Per The Norms Of Flag Code Of India Size: 20 Feetx 30 Feet

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 17-08-2023 Corrig.No.1 Date 21-08-2023
2 22-08-2023 Corrig.No.2 Date 24-08-2023

Key Value

Document Fees
Refer document
EMD
Refer document
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail